Boat AirDopes 131 Pro User Manual: How to Reset, Charging Indicator & Touch Controls

The boAt AirDopes 131 Pro True Wireless Earbuds User Manual is the ultimate guide for users seeking to experience musical bliss with their new earbuds. The manual provides comprehensive instructions on how to reset, charge, and use the touch controls of the earbuds. It is essential for users to have a good understanding of Bluetooth and device connectivity to steer the boat towards unparalleled shores of musical bliss. The package contains a pair of TWS earbuds, charging case, Type-C charging cable, extra earmuffs, user manual, warranty card, catalogue, and read me card. Users will learn how to power on the earbuds using smart power on or manual power on. Additionally, the manual provides instructions on how to use the earbuds in single earbud mode and how to switch to stereo mode. Users will also learn about BEAST™ mode, ENx™ tech, voice assistant, and how to perform a factory reset. The manual also provides specifications for the earbuds and important warnings for users to follow. With this user manual, users can enjoy an immersive musical experience with their boAt AirDopes 131 Pro True Wireless Earbuds.

AirDopes 131 Pro

User Manual

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 131 PRO Please consider this manual as your guiding map towards the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend a thorough reading of this manual Also, you may refer to the same at times when you face any sort of difficulty.

Package Contains

• lx Pair of TWS Earbuds
• lx Charging Case
• lx Type-C Charging Cable
• 2x Pair of Extra Earmuffs
• lx FAOCard
• 1 x User Manual
• 1 x Warranty Card
• l x Catalogue
• 1 x Read Me Card

Power On (First Time User)
Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy of our MP— (Insta Wake N’ Pair) technology, the earbuds power on automatically, their LEDs begin to flash in blue for 2 seconds, they get connected and enter the connection mode
OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds

Step 2: After powering on, the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes on the primary earbud and blue LED flashes once every 5 seconds on the secondary earbud
Connection Mode
Step 3: Turn on the Bluetooth functionality on your phone/media device and scan Step 4: Search for ‘Airdopes 131 PRO’ and pair accordingly. Congratulations! Your earbuds are now connected successfully via Bluetooth
Note:

• Pairing mode lasts for 5 minutes If the pairing time is messed. then you will need to reconnect the earbuds and follow the above-mentioned procedure.
• Airdopes 131 PRO remembers previously connected deviCes: once switched on. the earbuds automatically reconnect to the previously connected devices in working range.
• Once the earbuds get connected to your media device. the LED flashes once even/ 20 seconds.

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode Use Smart / Manual Power On for switching on the desired earbud
Step 2: The selected earbud automatically enters the connection mode indicated by red and blue LED flashes
Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 131 PRO’ to connect

Note:

• To switch to Stereo mode. simply take out the other earbud from the case It will automatically power on and pair with the previously selected earbud. hence enabling Stereo usage
• You can only switch to the next track in single earbud mode

Quick Glance on Functionalities

reset

Charging the Earbuds

Step 1 : Please insert the earbuds back inside the charging case in the correct orientation and close the lid
Step 2: During charging, the indicators on the earbuds turn into solid red.
Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power, the earbuds’ indicator turns blue and then switches off

Note:

• Before using the earbuds for the first time. it is recommended to fully charge the earbuds. Also, please keep the lid of the charging case closed while charging.
• When the remaining power of the earbuds is below 20%. the red LED flashes 3 times every 30 seconds and there’s a low power reminder sound prompt once every 5 minutes.
• When the earbuds remaining battery is between 30%400%. Blue LED blinks thrice if the case lid gets opened

Charging the Case
Step: To charge the case. plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ power bank, etc. White LED blinks continuously while the case is on charging. When the case gets fully charged. it gets indicated by a solid white LED.

Basic Functions

• Voice Assistant: Long touch left CTC for 3 seconds to activate your default smart voice assistant
• Answer: Single tap the CTC on either earbud to answer an incoming call
• Hang Up / Reject Call: Double tap the CTC on either earbud to end/reject the call
• Play/Pause Music: Single tap either earbud’s CTC to play or pause music
• Next Track: When playing music, double tap the right earbud’s CTC to skip to the next song
• Previous Track: When playing music, double tap the left earbud’s CTC to return to the previous song

BEAST™ Mode
Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt Long touch the right CTC for 3 seconds once again, to turn it off and return to standard Music Mode. Made rot the Garners – By Garners. BEAS™ Mode reduces the latency significantly and improves the overall gaming experience.
ENx™ Tech
Our ENC (Environmental Noise Cancellation) tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENxim as the 4x mics are already equipped with the same and activated by default Deliver your voice without interruptions anywhere -traffic, railway stations, airports, workspace.
Note: Volume can only be controlled via the media device
Voice Assistant
Step 1: Long touch the CTC on left earbud for 3 seconds to activate the smart voice assistant

Step 2 : The respective voice assistant screen pops up and you may place your commands at ease
Tips: You may try out the following commands.

Note: • If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.

Smart Power Off
Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in the correct orientation and close the lid. The earbuds automatically switch off (and enter charging mode)

Manual Power Off
Step 1: Long touch both CTCs for 5 seconds to manually power off the earbuds
Step 2: Once the earbuds get turned off, place them back inside the case and close the lid

Factory Reset

Perform the factory reset in case you feel any difficulty while operating your Airdopes.
‘NOTE: Before performing reset. clear “Airdopes PRO” from painting device history by forgetting the device
Step 1: Open the cover lid of the case and ensure the earbuds are being kept inside the case
Step 2: Long press the Reset button on the case for 5 seconds; the white LED on the case flashes for 5 seconds to indicate a successful reset
Step 3: Close the cover lid and reopen it again after a few seconds to perform fresh connection Congratulations! Your Airdopes 131 PRO has been Reset

Specifications

volume
ASAP’ Charge| Yes
Low Latency (BEAST Mode)| 65ms
transmission Range| 10m
Driver Size| llmm.2
Bluetooth Profiles| a2dp‘avctplavdtpavrcplaavdp1hr p1 hidlspp iopt1I2cap
Frequency| 20HZ-20KHZ
Battery| 400mAh (Case) 40mAh:2 (Earbuds)
Charging Time| 30Min (Earbuds); 1.5H (Case)
Charging Interface| US8 Type C
Water Resistance| IPXS

Warning

• Please follow the instructions to operate
• Please don’t use the earbuds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage It
• Don’t jam the ports such as the charger port, LED port, etc
• It is recommended to utilize the product below the maximum volume In order to protect hearing and extend the ear-buds service life

FAQ’s

How do I power on the earbuds for the first time?

You can either open the lid of the charging case (when earbuds are inside) for smart power on, or long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds for manual power on.

How do I connect the earbuds to my device?

Turn on the Bluetooth functionality on your phone/media device and scan for ‘Airdopes 131 PRO’ and pair accordingly.

Can I use the earbuds in single earbud mode?

Yes, both earbuds can be used in mono mode. Use Smart/Manual Power On for switching on the desired earbud.

How do I charge the earbuds?

Insert the earbuds back inside the charging case in the correct orientation and close the lid. During charging, the indicators on the earbuds turn into solid red.

How do I activate voice assistant?

Long touch left CTC for 3 seconds to activate your default smart voice assistant.

How do I switch to BEAST mode?

Long touch the right CTC for 3 seconds to switch to Low Latency mode, also known as the BEAST Mode.

How do I perform a factory reset?

Open the cover lid of the case and ensure the earbuds are being kept inside the case. Long press the Reset button on the case for 5 seconds; the white LED on the case flashes for 5 seconds to indicate a successful reset.

What is the battery life of the earbuds?

Up to 9HRS per charge; Up to 36H additional with Case (at 60% volume).

What is the transmission range of the earbuds?

10m.

Are the earbuds water-resistant?

Yes, they are IPXS water-resistant.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>