Braun Series 3 300s Electric Shaver User Manual
- June 16, 2024
- Braun
Table of Contents
Braun Series 3 300s Electric Shaver
90931010/III-16
Type 5409, 5408
Read these instructions completely, they contain safety information. Keep them for future reference.
Warning
- This appliance is suitable for cleaning under running tap water. Detach the appliance from the power sup-ply before cleaning it with water.
- Model 310s w&d only: This appliance is suitable for cleaning under running tap water and for use in a bathtub or shower. For safety reasons it can only be operated cordless. When using it in the shower, we recommend applying shaving foam or gel.
- This appliance is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of an electric shock.
- Only use the special cord set provided with your appliance.
- If the appliance is marked 492, you can use it with any Braun power supply coded 492-XXXX.
- Do not shave with a damaged foil or cord.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Children should not play with the appliance.
- Cleaning and user maintenance should not be made by children unless they are older than 8 years and supervised.
- For hygienic reasons, do not share this appliance with other persons.
Description
- 1 Foil & Cutter cassette
- 2 On/off button
- 3 Charge indicator
- 4 Shaver power socket
- 5 Special cord set (design may differ)
- 6 Protection cap
For electric specifications, see printing on the special cord set.
Charging
- Recommended ambient temperature for charging is 5 °C to 35 °C.
- The battery may not charge properly or at all under extreme low or high temperatures. Recommended ambient temperature for shaving is 15 °C to 35 °C. Do not expose the shaver to temperatures higher than 50 °C for extended periods
- Using the special cord set (5), connect the shaver to an electrical outlet with the motor switched off. When charging for the first time or when the shaver is not used for a few months, leave the shaver to charge conti-nuously for 4 hours.
- Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour.
- A full charge provides up to 20 minutes of cordless shaving time depen-ding on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
- 5-minute quick charge is sufficient for a shave.
- Models 301s/300s only: You can also shave by connecting the shaver to an electrical outlet via the special cord set.
Charge indicator (3)
The charge indicator shows the battery status.
- Charging: slow flashing
- Low battery: fast flashing
- Fully charged / during operation: continuously lighting up 18
Shaving
Press the on/off button (2) to operate the shaver. The flexible shaving foils automatically adjust to every contour of your face.
Tips for a perfect dry shave
For best results, Braun recommends you follow 3 simple steps:
- Always shave before washing your face.
- At all times, hold the shaver at right angles (90°) to your skin.
- Stretch your skin and shave against the direction of your beard growth.
Cleaning
Regular cleaning ensures better shaving performance.
Cleaning under running water:
- Switch the shaver on (cordless) and rinse the shaver head under hot running water until all residues have been removed. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
- Next, switch off the shaver, remove the Foil & Cutter cassette (1), and let it dry.
- If you regularly clean the shaver under water, then once a week apply a drop of light machine oil (not included) onto the Foil & Cutter cassette (1).
Cleaning with a brush:
- Switch off the shaver. Remove the Foil & Cutter cassette and tap it out on a flat surface.
- Use a small brush with soft bristles (not included) and clean the inner area of the shaver head. However, do not clean the Foil & Cutter cassette with a brush as this may damage it.
Keeping your shaver in top shape
Shaving parts
To maintain 100% shaving performance, replace the Foil & Cutter cassette (1), after about 18 months or when worn.
- Foil & Cutter cassette: 21B
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged by shaving every 6 months approximately. Then recharge the shaver to full capacity.
Environmental notice
- The product contains batteries and/or recyclable electric waste.
- For environment protection do not dispose of in household waste, but for recycling take to electric waste collection points provided in your country.
- Subject to change without notice.
Frequently Asked Questions
What is the recommended charging temperature for the Braun Series 3 300s Electric Shaver?
The optimal ambient temperature for charging the Braun Series 3 300s is between 5°C and 35°C.
Can I use the Braun Series 3 300s Electric Shaver for both wet and dry shaving?
Model 310s w&d of the Braun Series 3 300s is designed for both wet and dry use, including in the shower, but other models like the 301s/300s are designed primarily for dry shaving.
How long does it take to fully charge the Braun Series 3 300s Electric Shaver?
The Braun Series 3 300s typically requires about 1 hour to fully charge after the initial 4-hour charge.
What is the battery life of the Braun Series 3 300s Electric Shaver on a full charge?
A full charge offers up to 20 minutes of cordless shaving with the Braun Series 3 300s, depending on your beard growth.
Is the Braun Series 3 300s Electric Shaver suitable for children to use?
The Braun Series 3 300s can be used by children aged 8 and above under supervision, and by those with reduced physical, sensory, or mental capabilities if they have been given appropriate guidance.
Can I clean the Braun Series 3 300s Electric Shaver under running water?
Yes, the Braun Series 3 300s (especially the 310s w&d model) is suitable for cleaning under running tap water. Make sure it is disconnected from the power supply before cleaning.
How often should I replace the foil and cutter cassette of the Braun Series 3 300s Electric Shaver?
It's recommended to replace the Foil & Cutter cassette of the Braun Series 3 300s approximately every 18 months or when worn.
Can I shave while the Braun Series 3 300s Electric Shaver is charging?
For safety reasons, the Braun Series 3 300s should be used cordlessly, especially models designed for wet use. Models 301s/300s can be used while connected to an electrical outlet.
What should I do if the battery of the Braun Series 3 300s Electric Shaver seems to be losing capacity?
To maintain battery capacity, fully discharge the Braun Series 3 300s by shaving every 6 months and then recharge it to full capacity.
How do I know when my Braun Series 3 300s Electric Shaver is fully charged?
The charge indicator on the Braun Series 3 300s will continuously light up when it is fully charged.
What is the correct way to shave with the Braun Series 3 300s Electric Shaver for optimal results?
For the best results with the Braun Series 3 300s, shave before washing your face, hold the shaver at a 90° angle to your skin, and shave against the direction of your beard growth.
How can I perform a quick charge for the Braun Series 3 300s Electric Shaver, and what does it offer?
A 5-minute quick charge with the Braun Series 3 300s is enough for one shave.
Reference:Braun Series 3 300s Electric Shaver User Manual- device.report