Earbuds 12S True Wireless Headset User Manual
- June 6, 2024
- Earbuds
Table of Contents
Earbuds 12S True Wireless Headset User Manual
Product description
What’s in the Box
-
Earphone
-
Charging compartment
-
Data line
-
Manual
First use
Before using it for the first time, please make sure that the power of the two earphones and the charging compartment is full. When the power is low, please use the charger to On/Off.
Automatic boot
- Flip the charging compartment, and the headset will automatically turn on in the base.
- Long press the touch button for 3 seconds.
Automatic shut-down
- Put the headset into the charging base. And close the lid.
Bluetooth pairing connection
Bluetooth pairing: the headset is turned on and enters the pairing state, and the Bluetooth device searches for the headset pairing name “s12” and clicks to connect to complete the pairing. (If you can’t search for Bluetooth, please turn off and on the phone’s Bluetooth to reconnect) Successful connection: Voice prompt “Connected”.
Automatically connect back: After the first connection.
Reset
When the left and right ears are not connected or the device
cannot be paired, you can reset it according to the following
operations:
- Delete the pairing information of the “S12” headset on the mobile phone first.
- When the headset is turned on and not connected, tap the left/right headset function key 5 times to turn it off.
- After resetting the headset, the pairing information recorded by the Other functions.
Other functions
Manual on/off
In the off state, press and hold the function button for 3 seconds to turn on the headset.
In the power-on state, press and hold the function button for 5 seconds, the headset will be disconnected and turned off. Timeout not connected.
When the headset is waiting to be paired, if it fails to connect with the device within 5 minutes, it will automatically shut down
Bluetooth disconnect
After the connection is successful, if the Bluetooth of the mobile.
Key operation
Play music
Play/pause music: double click the function key Previous song: triple click the left ear function key Next song: triple click the right ear function key Volume -: Click the left ear function key Volume +: Click the L.
Call management
Answer/hang up a call: Double-click the function button to reject the call: long press the function button for 2 seconds.
Voice control
Long press the left/right ear function key for 2 seconds (needs the phone to support this function)
Headphone battery level and charging headset power display.
The mobile phone status bar can display the battery information of the headset device (the mobile phone version needs to support this function).
Headphone charging status
During the charging process of the headset, the indicator light will give a charging prompt, and the indicator light will go off when it is fully charged.
Headphone low battery reminder
When the headset is in a low battery state, the headset will have a voice prompt to indicate that the battery is insufficient. Please put the headset in the charging box to charge in time.
Charging in the charging compartment and charging in the charging compartment It is recommended to use a standard charger and the attached charging cable to charge the charging compartment.
Low battery reminder in charging compartment
When the charge in the charging compartment is too low, please charge the charging compartment in time.
Indicator status headphone indicator
- Turn on: the blue light keeps on.
- Shut down: the blue light flashes 3 times.
- Unpaired: the blue light is on.
- Waiting for pairing: the blue fire light on the main ear flashes, and the secondary ear fires.
- Successful pairing: the indicator light goes out.
- Music status: the indicator light goes out.
- Call status: the indicator light is off.
- Low battery: The blue light flashes quickly.
- Charging status: the blue light is always on.
- Charging is completed: the blue light goes out.
Charging compartment indicator
- Charging: the red light flashes.
- Charging is complete: the red light is on.
- Low battery: The blue light flashes quickly.
- Charge the headset: the blue light is on.
- The headset is fully charged: the blue light goes out.
Product parameter
Bluetooth version
| Bluetooth 5.0| Call time| 3H
---|---|---|---
Listening time| 3H| Standby time|
25H
Machine weight
| 28.8g| Bluetooth distance| ≥10M
Base charging time| 1.5H| Headphone charging time|
1-1.5H
Common problem
-
The headset cannot be paired with the mobile phone?
Check whether the headset is paired or connected back, and check the Bluetooth search function of the mobile phone. -
The headset cannot be turned on?
Please check whether the power of the headset is sufficient, and charge it for 30 minutes before turning it on. -
Can the headset be replaced?
No, this headset uses a non-detachable battery. -
Can I use this headset while driving?
You can use this headset while driving, but it is not recommended to use a Bluetooth headset while driving, and reduce the volume as much as possible. -
The headset is disconnected from the mobile phone?
The effective distance of this headset is 10 meters indoors. If the distance between the mobile phone and the headset exceeds 10 meters or there are multiple obstacles, the headset and the mobile phone will be disconnected. Please keep the headset within the effective distance. -
After the headset is connected to the computer or mobile phone, do you hear different sounds?
Because Bluetooth is a wireless technology, it is very sensitive to objects between the headset and the connected device. Please check whether there is metal or other objects that affect the connection in the connection range.
Security Question
- Because there is a battery in the headset, please try to keep this product away from high temperature areas.
- Please try to use qualified chargers and charging cables, and try to avoid using high current and voltage fast charging equipment to charge this product.
- Please choose a suitable scene to use this product.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.