Ancerre DESIGNS LEDM-OTTO-30-B LED Bathroom Mirror Instruction Manual

June 9, 2024
Ancerre DESIGNS

Ancerre DESIGNS LEDM-OTTO-30-B LED Bathroom Mirror

Installation Instructions

Please read follow warm tips before installation ! A Power off electrical before installation. Use voltage detector to make sure. Verifly the circuit breakeris tumed off & lock it in case someone try to fum it on. s more important then saving a few dollars. Af you’re NOT expericiend in installing electrical wiring, then hire a professional electriclan. Your safety Avoid water at all times when working with electricity. Never touch or install any electrical equipment or circuits with wec nanOs. A Tools you will need: voltage tester, wire cutters, wire and cable strippers, needle nose pliers, continuity tester, and wire diosure. 6 Wear Safety Glasses and Protective Clothing to protect you from sparks.

Installation Tools Needed

Ancerre-DESIGNS-LEDM-OTTO-30-B-LED-Bathroom-Mirror-
fig-1

Installation manual

Ancerre-DESIGNS-LEDM-OTTO-30-B-LED-Bathroom-Mirror-
fig-2

  • Step 01: Check the wallLMake sure that the wall is bearing walls that can support the Mirror’s welght. Measure the width and helght of the miror back holes/hocks distance with a tape measure.
  • Step 02: Mark the punching postion on the wall with a pencil. use level gauge make sure the hole at the same level.
  • Step 03: Use impact drill punch holes in the marked center (6-8MM drill bit),the drilling depth is about SCM.Use a hammer to drlve the expanslon screw into the drilled hote.Ancerre-DESIGNS-LEDM-OTTO-30-B-LED-Bathroom-Mirror-fig-3
  • Step 04: Use screwdriver screw the screw lnto the expansion screw tighten. And then leave a distance of about 5MM from the wall
  • Step 05: Hand the mirror up with screw.

Front View

Back View

FEATURES

  • 5mm Copper free mirror.
  • PVC film backed.
  • Mounting type: Vertically
  • Energy Efficient and Long Lasting LED Lighting.
  • 1Year Limited Warranty on Electronic Components.

LIGHTING

  • LED (Light-Emitting Diode).
  • Defogger.
  • Bluetooth
  • Color Temperature: 2800& 6000K.
  • Power Source: Input: 110volts, 50/60HZ.
  • Ip44 rated.
  • Brightness Lumen: 3200; Power Consumption :60Watts;
  • Energy saving LED ifetime approx 50,000 hours.
  • UL certificated for electric power supply defogger and LED strips.
  • Available 5tandard size: 24″ x40 30″x40
  • www.ancere.com
  • Email: info@ancere.com
  • Customer Service: 888.830.8828
  • www.ancere.com
  • Email: info@ancere.com
  • Customer Service: 888.830.8828

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals