SR-K801 Slim Mini USB Wired Keyboard NIB User Manual
- June 6, 2024
- SR
Table of Contents
Computer Keyboard SR-K801 Manual
Installation Guide
Getting started with wireless keyboard SR-K801
- Open the battery cover, put it into two AAA batteries (Pay attention to the + and – of the battery) cover the battery cover back
- Get the USB receiver in the packaging box slot, put it into the computer USB port, plug it, and play
IF the wireless K801 drops the code, try as below process.
- Put off all your receivers on your computer.
- Put into batteries.
- Place the keyboard near the computer. Try to press “ESC”+”=” for more than 3 seconds. then the left light is on.
- Put into the K801 keyboard USB receiver. Then can use
Troubleshooting
Wireless SR-K801 Keyboard not working?
-
Check the receiver connection, try a different USB port on the computer.
connect directly to the computer and do not use a USB hub. -
Check battery orientation or replace the battery.
-
Remove metallic objects near the keyboard
-
Restart the computer
FN KEYS
To use,press and hold the Fn key,then press an F-Keys （Compound keys Composite
key:
FN+F1 / F2=F11 / F12
FN+F3=Play the default music player
FN+F4=Back
FN+F5=Play / Pause
FN+F6=Forward
FN+F7=Computer mute
FN+F8=Volume down
FN+F9=Volume up
FN+↑=Page up
FN+↓=Page down
FN+←=Home
FN+→=End
Two indicator lights:
Light on the left light “Num lock” open
Light on the right light “Caps lock” open
NOTE :
- The keyboard can be used normally after turning off “Num Lock”.
- After turning on “Num Lock”, you can use the numeric keypad (displayed in the upper right corner of the button)
- To use the multimedia button, please press and hold “Fn” first.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>