SR SUN RISE Shower System with Push Button Diverter Instruction Manual

SR SUN RISE Shower System with Push Button Diverter

Please do not hesitate to contact us with your questions, concerns and/or problems, we’re here to help. We will replace or repair your product free of charge.

ABOUT US

• Founded in 2005, SR SUN RISE provides the best shower systems online for home bathrooms and commercial use. We are the go-to brand for performance, reliability, and modern shower fixtures.
• SR SUN RISE ensures that all our products are health-conscious, ergonomic, and environmentally friendly. This allows us to exceed the expectations of our consumers, even those who are accustomed to high-end lifestyles. A major goal of ours since the brand’s inception has been to make consumers feel our products have been personalized for their needs in an ever-evolving multi-functional home.
• SR SUN RISE products frequently appear in the world of high-end commercial buildings in Europe, the Middle East, Asia, Southeast Asia, etc. These regions are well-known for having lavish bathrooms.
• We use science and technology to improve people’s quality of life.
• The bathroom is not just the bathroom, it is the place where people unload a day of fatigue and get to be the most relaxed and vulnerable versions of themselves. SR SUNRISE is committed to continuously improving the experience of life.
• At SR SUN RISE we pride ourselves on using humane and environmentally conscious methods to manufacture all our shower systems and products. We do our part to make sure that we can preserve our planet. We hope to set an example for others to also do their part so that future generations can experience the beauty this world has to offer.

Package list

WARNING: Choking hazard. Please keep all small parts and plastic bags out of the reach of children.

INSTALL SHOWER VALVE

Step 1: Measure valve installation dimensions.

Step 2: Determine the position of the valve.

Step 3: Drill, hammer in anchors, and fasten valve body to a wall(This step is for masonry application.)

Step 4: Check for level on valve body

Step 5: Connect the water pipe. (Pipe clean and free of impurities)
Be suitable for Pex pipe, Copper pipe and PVC pipe

• 1/2 inch male NPT fitting connection to be made with pipe thread sealant, do not over-tighten

Step 6: Test for Leaks Before Installing Wall Board

1. Check the valve connector for leaks;
2. Open the valve and test the hot and cold water left and right;
3. Checking the Water diverter knob can correctly switch between the showerhead and handheld.

Step 7: Tile

Important Note

Wall Mounted /Ceiling Mounted Installation Before Tiling

• After tiling, the distance from the tile surface to the brass fittings (recessed the wall) is I: The shower bracket is 0.4 inches. 2: The shower arm is 0.2 inches.

INSTALL SHOWER BRACKET

INSATLL HANDHELD SHOWER HEAD AND SHOWER HOSE.

INSTALL SHOWER ARM (A STYLE) AND RAIN SHOWER HEAD

INSTALL SHOWER ARM (B STYLE) AND RAIN SHOWER HEAD

WARRANTY

1. If the above contents are not complete, the warranty will be considered void, please confirm the above contents when you purchase.
2. The complimentary repairs are limited to instances mentioned on the warranty card only.
3. Within the warranty period, if any technical faults occur, customer should present this warranty card along with the invoice to the retailer/assembly fitter.

Guarantee Repairs Claims

1. Within the warranty period, SR SUNRISE SANITARY is responsible for repairing any defective product free of charge.
2. Please contact the seller via email with this warranty card and invoice if repairs are needed during the warranty period.
3. SR SUNRISE SANITARY will not be responsible for any claims listed below:
   • The damage and/or malfunction caused by improper use and/or repairs; or any unauthorized reconstruction; including any damage caused by abuse (i.e. fall, throw… etc.)
   • Please engage the services of a professional plumber. SR SUNRISE SANITARY will not be responsible for any damage and/or malfunction caused by wrongful installation.
   • The damage and/or malfunction caused by removing after installation or other factors.
   • The damage and/or malfunction caused by application beyond the scope of usage.
   • The damage and/or malfunction caused by sand, dirt and other impurities.
   • The damage and/or malfunction caused by improper/insufficient maintenance; rust on finishing etc…
   • The damage and/or malfunction caused by fire, earthquakes, floods, lightning and other natural disasters, pollution, harmful gas, salts, abnormal voltage and other factors.
   • On occasions when the warranty card or invoice is not presented.
4. The recommended water temperature of hand showers and rain showers is <42°C; water pressure is 0.1-0.3 Mpa. The highest temperature should not reach beyond 70°C and water pressure should not exceed the limits of 0.05-0.5 Mpa. Please keep any shower products away from the heating devices to avoid potential risks.
5. This limited warranty applies only to the original end-user or business. It expressly excludes labor charges, removal charges, installation, or other incidental or consequential costs. Any in- appropriate application will void the warranty.
6. This warranty cannot be replaced if missed, please keep safe.

Clean and maintain product

How to clean shower head nozzles

1. Just rub the nozzles with your finger or a toothbrush to loosen any deposits, and then run hot water for a few minutes
2. Put the showerhead into a pot. Consider using a smaller container that just about fits the showerhead; this way, you will use less vinegar. You can also use a small bucket or plastic bin.

Fill the pot with enough white vinegar to cover the showerhead. The acids in the vinegar will help dissolve the white mineral deposits on the showerhead.
Let the showerhead soak in the vinegar for 30 minutes The more soiled the showerhead is, the longer you will have to leave it in the vinegar.

Maintain Chrome and Brushed nickel finished product

1. To clean the products all you need is a high-quality microfiber cloth.
2. Apply a high-quality chrome cleaner to a clean cotton cloth, and wipe over the chrome. Leave as per product instructions, and then rinse with warm water. Gently remove any product residue using a dry chamois or paper towel.
3. How to Clean Chrome: Homemade Solutions In addition to professional products, homespun solutions also have their place when breathing new life into dull chrome. Try this shortcut to achieving chrome cleaning nirvana:

Detergent and warm water! Submerge chrome-plated objects including pots and pans in a sink full of warm water. Add a half-cup of a high-quality washing-up detergent (Persil washing-up liquid is good) and rub gently with a soft cotton cloth to avoid scratching the chrome. Use a scented detergent to leave kitchenware smelling fresh, as well as spotless.

CONTACT

• mikechen@eyakult.com (USA)
• zhongly@eyakult.com (Canada)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>