domi LGCF1602 Tool Storage Shed Instruction Manual

domi LGCF1602 Tool Storage Shed

Product Information

The product is an outdoor structure with model number LGCF1602. It comes with a user manual that provides assembly instructions for proper installation. The structure requires bolts to secure the frame to the ground, ensuring stability against strong winds.

The dimensions of the structure are as follows:

• Width: 1792mm (70.55”)
• Depth: 1602mm (63.07”)
• Height: 1635mm (64.37”)

Product Usage Instructions

Before starting the assembly process, make sure you have all the necessary parts and hardware as listed in List 1 and List 2.

To assemble the product, follow these steps:

Step 1: Prepare the Ground

• Ensure the ground is level for installation.

Step 2: Frame Assembly

• Attach Part A to Part A1/A2/A3 according to the instructions, ensuring that the four corners are right angles and the diagonal distances are equal.
• Fix Part C3 onto Part A1 using screws 9# and gaskets.
• Insert Part A and fasten with screws 1# and gaskets.

Step 3: Wall Panel Assembly

• Install Part C/J2/C1 with screws 2#, gaskets, and nuts.
• Place the assembled wall (C/J2/C1) on the bottom frame (A1) and fix it with screws 1# and gaskets.

Step 4: Side Wall Assembly

• Place Part J/C/J2 on the bottom frame (A2/A3) and fix it with screws 1# and gaskets.
• Install 2 Part H1 with 4 screws 9# and gaskets, then put on the plastic caps.
• Repeat the above procedure to assemble the other side.

Step 5: Back Wall Panel Assembly

• Install 2 Part J (Back Wall Panel) using screws 1# and gaskets on the bottom frame.
• Fix 2 Part J (Back Wall Panel) to Part H using screws 9# and gaskets, then put on the plastic caps.
• Repeat the above procedure to assemble 2 Part J on the Side Wall.

Step 6: Corner Assembly

• Enclose with Part B1/B2/B3 according to the figure, and fix it with screws 12# and gaskets.
• Use screws 9# and gaskets to fix 2 Part C4 on Part B1.
• Fix Part B4 & B8 on the inside of Part B1 with screws 12# and gasket.

Step 7: Top Frame Assembly

• Place the assembled beam (B1, B2, B3) on the upper end of the wall panel and fix it with screws 1# and gaskets.
• Fix Part C4 to the upper end of Part C1 (C2) with screws 3#, gaskets, and nuts.

Step 8: Top Frame Installation

• Assemble the top frame using screws 15# and nuts to combine Part E with Part D1 and Part D2.
• Put the top frame on the beam (B3/B1/B3) and fix it with screws 1# and gaskets.

Step 9: Roof Panel Assembly

• Assemble Part G1 to one side of Part K1 with screws 2#, gaskets, and nuts.
• Assemble Part G2 to one side of Part K3 with screws 2#, gaskets, and nuts.

Step 10: Roof Panel Installation

• Lay the roof panels (K1/K2/K2/K2/K3) in order and fix them to the top frame D1/D2 using screws 2#, gaskets, and nuts.
• Fix the roof panels (K1/K2/K2/K2/K3) on the backside beam B2 using screws 1# and gaskets.

Ensure you follow all the instructions carefully for proper assembly of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>