MAJESTIC SV 517 RDS BT DAB Car Radio Owner’s Manual

MAJESTIC SV 517 RDS BT DAB Car Radio

PRECAUTIONS AND MAINTENANCE

1.  If the car interior is extremely hot, after being parked in the sun, do not use the player until the car has been driven for a while to cool off the interior.

2.  The unit is designed for the negative terminal of the battery which is not connected to the vehicle metal. Please confirm it before installation.

3.  Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise, it may overload or burn out the power amplifier.

4.  Do not install the detachable panel before connecting the wire
   NOTE: the operating temperature of the car radio varies from + 5 ° to + 35 ° max. Damage caused by excessive heat is not covered by the warranty.
   Key Functions:
   1/8. Forward/backward button In MP3/WMA mode, press to play next/previous song; keep pressed to forward/backward in the song. In radio mode, press to skip to next prev station, Keep pressed for auto/manual search
   In DAB mode, press to scroll between the saved stations. SEL/RDSNolume – knob on panel
   In Normal mode, use this knob to increase/decrease the volume level. To access various sound parameters, push the SEL button to cycle through the following adjustable settings: VOLUME > BASS > TREBLE > BALANCE> FADER> LOUD> EQ > DX> STEREO> VOLUME CALLS IN BLUETOOTH MODE> BLUETOOTH ON/OFF
   Press and hold to activate the RDS function: AF >TA> PTY
   MUTE button – Press to switch the volume off. press again to return to the original volume

5.  Infrared Remote Control Reception

6.  LCD Display

7.  USB Slot for Music File – Plug in your USB Device to play the music.

8.  Mod /0 button – Press to change between Radio FM – DAB – SD – USB – SD – AUX – BT Function. Once Bluetooth is activated; press to hang up the phone call.

9.  CLK Button – Press to display and adjust the time.

10.  -•q button – In Radio mode. press to change among FM1-FM2-FM3. In MP3 mode, press to scan ID3 tag of the track, keep pressed, and rotate the volume knob to select a track. Once Bluetooth is activated; press to answer the phone call. In DAB mode long press to start automatic station scan. The radio will store the strongest stations, once completed the first station stored will be automatically broadcasted.

11.  1/ button – In MP3 mode, press to pause the playback, press again to resume playback.

12.  2/INT Button – In MP3 mode, press to listen to the first 10 seconds of each song.

13.  3/RPT Button – In MP3 mode. press to repeat the song/folder.

14.  4/RDM Button – In MP3 mode, press to play song randomly.

15.  5/-10 Button – In MP3 mode. press and hold this button for 3 seconds to select the folder. Press shortly to rewind backward 10 songs at one lime.

16.  6/+10 Button – In MP3 mode. press and hold this button for 3 seconds to select the folder. Press shortly to fast forward 10 songs at one time.

17.  USB Slot for charging devices – Charge your mobile phone by plugging in your USB Cable (0.5A max)

18.  Aux In Function – Choose to connect and play any compatible external audio equipment.

19.  SD Card Slot – Insert an SD Card device into this slot for MP3/WMA playback.

20.  APS button – In FM radio mode. long press to start stations scan and store the strongest one on preset button 1-6. Each band can save up to 6 channels. Press this button to scan all the stored stations. In MP3 mode. press this button and rotate the volume knob to select one track. Confirm pressing VOL

21.  PWR button – Press to switch on the unit, press and hold to switch off the unit.

22.  RES – Press RES in case the unit is locked, on display LCD some symbols of error appear and buttons do not work.

23.  MIC – Microphone

Remote Control Function

1.  Power/MUT Button – Press to turn on. Press and hold to mute down the volume, press and hold again to resume the previous volume level. Keep pressed for about 2 seconds to turn off the device.
2. Button – Once Bluetooth is activated, press to answer the phone call.
3.  Button – Once Bluetooth is activated, press to hang up the phone call. Press to cancel the number you just press when you make a call.
4.  1/IIButton – In MP3 mode, press to pause the playback. Press again to resume playback.
5.  2/INT Button – In MP3 mode, press to listen to the first 10 seconds of each song.
6.  3/RPT Button – In MP3 mode, press to repeat the song.
7.  4/RDM Button – In MP3 mode, press to play songs randomly.
8.  5/-1 O Button – In MP3 mode, press and hold this button for 3 seconds to select the folder. In MP3 mode, press shortly to rewind backward 10 songs at one time.
9.  6/+10 Button – In MP3 mode, press and hold this button for 3 seconds to select the folder. In MP3 mode, press shortly to fast forward 10 songs at one time.
10.  ?/Loud Button – Press to activate the LOUD function, press to switch off.
11.  8/ST Button – During FM Radio mode, press to select between Stereo & Mono.
12.  EQ Button – Equalization select function (POP/ROCK/CLASS/JAZZ)
13. I APS Button – In Bluetooth mode, press to use the H*” key. Press to scan the strongest stations automatically & store them into 1-6 memory knobs.
14.  MOD Button – Press to change between FM/DAB/SD/USB/AUX/BT Function.
15.  Button – In Bluetooth mode, press to use the “‘If’ key.
16. 19. Forward/Backward Button In MP3/WMA mode, press -I- button forward or backward one song. Keep pressed to fast forward /backward in the song. In FM radio mode press to start frequency search auto/manual. DAB mode, press to scroll between the saved stations.
17.  Re-Dial/BND Button In Bluetooth mode, press to redial the phone number who you just called. In radio mode, press to switch the radio band – FM1-FM2-FM3.
18.  & 21. Vol +Nol- Button In Normal mode, press to increase/decrease the volume level.
19.  Select Control Press this button to cycle through the following adjustable settings: VOLUME > BASS> TREBLE > BALANCE > FADER > LOUD > EQ >DX> STEREO

Main Functions

•  With Dual USB Construction, support charging your mobile device at the same time listen to the playback.
•  A2DP Bluetooth, Connect your mobile phone to the unit to make phone calls or play music.
•  Support USB/SD Card Slot with Aux In
•  FM Radio with RDS
•  DAB/DAB+ radio: 174.928 -239.200 MHz
•  Support audio file format: MP3/WMA
•  Support mobile charging with USB Slot
• This unit only supports FAT16 or FAT32 file systems.
• Please do not format its file system when formatting the USB, SD/MMC card.

Basic Control:

1.  Power switch / Mute
2.  Press any button to turn on the unit. Press the PWR button to turn off the unit.
3.  When the unit is on, press and hold the MUTE button to mute the volume. Press again to recover to the previous volume level.

Mode Button

1.  Plug-in USB/SD/MMC card under radio mode, the unit will change to USB/SD/MMC card mode; This unit will change to Radio mode when USB/SD/MMC card is removed.
2.  Press the MOD button to change between the modes FM/DAB/USB/SD/AUX.

Time display and setting

1.  Time will be displayed after slightly pressing the CLK button.
   The LCD display will return back to its original display after 5 seconds.

2.  Press and hold the CLK button to set the time, the time on the display will be blinking. Then slightly rotate the rotary knob or press VOL-NOL+ on remote control to set the hour, to confirm the hour setting, press SEL then again rotate the rotary knob or press VOL-NOL+ on the remote control to set the minute. To confirm the time setting, simply by pressing the SEL button.

3.  in radio mode the clock will adjust the time automatically once the radio signal is received (CLOCK TIME), if the selected radio station cannot update the time please set it manually.

Audio Mode Selector

1.  Rotate the volume knob to increase/decrease the volume level.
2.  Press volume knob selector, ‘VOL>BAS> TRE>BAL>FAD>LOUD>EQ>DX>Sr on the display, then rotate the volume knob selector to increase/decrease the volume, bass, treble, balance, fader, loud On/Off, EQ, DX/LOC, Stereo/Mono.
3.  keep pressed volume knob to tum on RDS function
   Note: If EQ is on, the Unit will not be able to control the BASS & TREBLE Function. DX and ST are available only in FM mode.

Radio Function:

1.  Band Control
2.  Press the B/A button to select the band, repeatedly to cycle through 3 radio bands: FM1-FM2-FM3.
3.  Tuning Bl to auto-tune the radio station. Press and hold the button again, manual tuning will be activated. In this mode, you can choose the frequency manually. If the No button is pressed for 3 seconds, it will resume auto-tuning automatically.
4.  Station storing Search for the desired frequency, then press one of the preset buttons (1-6) for 2 seconds, the station will be stored on the chosen button.
5.  Auto store and search By pressing the APS button for about 2 seconds, the radio will scan the whole frequency, after that it will store 18 stations with the strongest signal in the preset buttons.

RDS Function

1. Press and hold the SEL knob to activate the RDS function. AF>TA>PTY Rotate the SEL knob to select the AF on/off, then press again to tum on/off TA; Then press Again to tum on/off PTY.
2. AF function The factory default is AF function on, press and hold the rotary knob and press AF shortly to tum it on/off. If the selected radio station is noisy, and if this function is on, it will auto search an alternative frequency. If the searched channel does not contain the RDS signal the AF icon will flash, when it contains the RDS signal the AF icon will be on and it will appear the station name.
3. TA Function Press and hold SEL knob to turn TA Function on. When TA is on, it will broadcast the traffic announcement. If the unit is in MP3/SD-MMC/AUX mode, it will temporarily switch to radio mode. When the traffic announcement is off, the unit will tum back to the previous mode.
4. PTY Function
   • Press and rotate SEL knob to tum on PTY mode
   • PTY function is divided into PTY MUSIC, PTY SPEECH, and PTY ON; when one of the PTY programs is selected the radio will search for the related information and will stop on the program where the info is found.
   • Into PTY MUSIC, press the numbers 1-6 to choose between different programs
   • Press 1-POP, ROCK, Press 2-EASY, LIGHT, Press 3-CLASSIC, OTHER,
   • Press 4-JAZZ, COUNTRY, Press 5-NATIONAL, OLDIES, Press 6-FOLK,
   • Into PTY SPEECH, press the numbers 1-6 to choose between different programs
   • Press 1-NEWS, Press 2-SPORT, Press 3-CULTURE, Press 4-Weather, Press 5-SOCIAL, Press 6-TRAVEL
   • DAB function
   • DAB station scan
   • In DAB mode, press and hold the BND button to start auto station search.
   • The radio will automatically store radio stations with the strongest signal. Once the scan is complete, the first saved station will be automatically broadcasted.
   • DAB station tuning Press …,.f……i to scroll between the saved DAB stations
   • Saving ratio stations Select the desired radio station, press one of the preset keys (1-6) for about 2 seconds, the station will be stored in the chosen key.

DAB info display

• Press repeatedly BND key to scroll between the following information (if available):
• Dynamic label segment (DLS)
• Signal strength
•  Program type (PTY)
• Frequency
•  Bitrate Codec

USB Function:

1. This unit can read the MP3/WMA files found in USB/SD cards by plugging them into the slots.

2. When it is playing the tracks from USB, a USB icon is found on the display.

3. When it is playing the tracks from SD/MMC card, SD/MMC icon is found on the display.

4. When the file type is MP3; then the MP3 icon is found on the display.

5. When the file type is WMA, then the WMA icon is found on the display.

6.  Press fast forward to go to the next track and press rewind backward to rewind to the previous track.

7.  When MP3 is playing, press the “1” number button to pause it and to resume it by pressing “1” again.

8.  Press the “2/INT” number button to listen to the first 10 seconds of each song. Press again to cancel.

9.  Press the “3/RPT” number button to start or cancel the repeat function.
   The cycle is: REPEAT ONE -> REPEAT DIR -> REPEAT ALL

10. Press the “4/RDM” number button to play all the MP3 files randomly. Press again to cancel.

11. Press the “5/10-” number button to play the previous 10 tracks. Press and hold to rewind to the previous folder.

12.  Press •5110+n number button to play the next tracks. Press and hold to forward to the next folder.
    ID3 Tag 1. lf The MP3/WMA file is available with ID3 TAG. The following information will be shown on the LCD

display automatically.

•  Song name with file type
• Title
• Artist
•  Directory
  You may have a quick scan of the track information which you are playing by pressing the BND button.
  During MP3/WMA mode, you can activate the track search mode, with the below methods: For example, If you are now playing the first song and you want to swift to track 59, press the APS button, “TRK SCH” will be found on the LCD display, Then rotate the SEL knob to select “5” or press ·5″ on the unit or remote; so that the first digit “5” will be found on LCD Display. Then wait for 3 seconds, it will move to the second digit automatically; then again rotate the SEL knob or press the number 9 knob on the remote control; so that the second digit “9” will be found on the LCD Display. To confirm your selection, press the “SEL” button.

Bluetooth

1.  Switch on our unit, and turn on the Bluetooth on your mobile device.
2.  Your mobile device will automatically search the signal (CAR BT) which is from our unit
3.  You confirm to pair with CAR BT on your mobile device, then your mobile device will be paired with our unit.
4.  Once the pairing is done successfully, the Bluetooth icon on LCD Display will lighten up, which means Bluetooth is paired. ENG4
5.  Now you can enjoy the Bluetooth function. You can Play Music / Make Calls I Receive Calls through your mobile phone.
6.  If you get an incoming call while using Radio / USB /SDI Aux-In, the Bluetooth function will be activated automatically. Once the call is finished, the unit will switch back to original mode (Radio / USB / SD / Aux In)

To Receive a Call

1.  When there is an incoming call, the incoming call’s number will be shown on the LCD display. Then press BND to answer it, and to hang up press MOD/0.
2.  When this unit is switched off and an incoming call is received; this unit will be switched on automatically and the Bluetooth function will be activated. After the call is finished, then this unit will automatically switch off.
3.  during the conversation, press the BND key to transfer the call from the car radio to the phone and vice versa.

To Make a Call

1.  Press BND (.from the remote control), “DIAL” will appear on the display dial the number from the remote control, Press BND ( from the remote control), again to make a call, to hang up press MOD ( from remote control)
2.  Press RE DIAUBND on the remote control the unit will call the last dialed number.

Other Function

Music Player In BT mode if you open music files from your mobile, then the music will be played from this unit. Not only you can access on interest and listen to your music from this unit, but also you can forward or
backward the track by pressing the l-+4/……I keys. To turn off Bluetooth, just switch off the Bluetooth function on the mobile; then this unit will be disconnected from your mobile immediately.
Press and hold to forward to the next folder. ID3 Tag

of The MP3/WMA file is available with ID3 TAG. The following information will be shown on the LCD display automatically.

•  Song name with file type
• Title
• Artist
•  Directory
• You may have a quick scan of the track information which you are playing by pressing the BND button.

During MP3/WMA mode, you can activate the track search mode, with the below methods:
For example, If you are now playing the first song and you want to swift to track 59, press the APS button, “TRK SCH” will be found on the LCD display, Then rotate the SEL knob to select “5” or press ·5″ on the unit or remote; so that the first digit “5” will be found on LCD Display. Then wait for 3 seconds, it will move to the second digit automatically; then again rotate the SEL knob or press number 9 knob on remote control; so that the second digit “9” will be found on the LCD Display. To confirm your selection, press the “SEL” button.

Bluetooth

1.  Switch on our unit, and turn on the Bluetooth on your mobile device.
2.  Your mobile device will automatically search the signal (CAR BT) which is from our unit
3.  You confirm to pair with CAR BT on your mobile device, then your mobile device will be paired with our unit.
4.  Once the pairing is done successfully, Bluetooth icon on LCD Display will lighten up, which means Bluetooth is paired.
5.  Now you can enjoy the Bluetooth function. You can Play Music / Make Calls I Receive Calls through your mobile phone.
6.  If you get an incoming call while using Radio / USB /SDI Aux-In, the Bluetooth function will be activated automatically. Once the call is finished, the unit will switch back to original mode (Radio / USB /SD/ Aux In)

To Receive a Call

1.  When there is an incoming call, the incoming call’s number will be shown on the LCD display. Then press BND to answer it, and to hang up press MOD/0.
2.  When this unit is switched off and an incoming call is received; this unit will be switched on automatically and the Bluetooth function will be activated. After the call is finished, then this unit will automatically switch off.
3.  during the conversation, press the BND key to transfer the call from the car radio to the phone and vice versa. To Make a Call

MOD (!:!/C) from remote control)
Press RE DIAUBND on the remote control the unit will call the last dialed number.

Other Function

Music Player
In BT mode if you open music files from your mobile, then the music will be played from this unit. Not only you can access on the interest and listen to your music from this unit, but also you can forward or

Installation

Assembly Instructions: The unit has an anti-theft locked box design, please follow the below installation instruction:

1.  Push the fixing bracket completely into the radio slot. Me, mess,”
2.  Insert the radio into the housing until it is properly fastened with the bracket.

Attention:

1.  Install the car radio so as not to affect driving functions.
2.  Before completing the fixing of the car radio, make sure the wiring has been correctly installed, testing the functionality of the radio. Use only the accessories supplied with the car radio.

Removal:

Insert the removal lever provided on the sides of the radio, up to that you will not hear a “click”. Once the correct position is reached, pull towards themselves the car radio to extract it.

DISASSEMBLY AND ASSEMBLY INSTRUCTIONS

Assembly Instructions:
Connect the unit harness with lock and push them together inside, insert the unit harness into the instrument panel, And push the player into the metal harness until it is locked. If the assemble angle is above 30, the unit may not work properly. The installation place should not affect the Driver’s normal operations or injure the Passengers when the car is braked suddenly.

Disassembly Instructions:

Take the plastic frame off, insert the keys into the holes in the face panel, then pull the keys hard to take player out of the instrument panel.

Specifications

• Power -12V DC
• Maximum Current -1 0A (MAX}
• Installation Size (LWH)-160 X 190 X 120mm Weight 0.92 kg
• Working Temperature -20C ~ +60C
• Audio
• High Power Output-4×45 Watts
• Speaker impedance -4 Ohms ~ 8 Ohms
• FM Tuning
• Frequency Range-87.5-108 MHZ
• Usable Sensitivity-10dB (S/N 30 dB) 15 dB DAB band Ill frequency 174.928-239.200 MHz Bluetooth V2.1

INFORMATION TO USERS OF DOMESTIC EQUIPMENT

Pursuant to Art. 25, Paragraph I of the Legislative Act N. 49 14th March 2014, “Implement of the Directives 2011/65 I EU and 2012/19 I EU concerning the reduction of the use of hazardous substances in electrical and electronic equipment, as well as waste disposal”. The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its useful life must be collected separately from other waste. The user must, therefore, dispose of the equipment at the end of its life to the appropriate electronic and electrotechnical waste centers, or return it to the retailer at the time of purchase of a new type of equivalent equipment, one by one. Appropriate separate disposal for the subsequent start-up of the disused equipment for recycling, treatment, and compatible environmental disposal helps to avoid possible negative effects on the environment and health and favors the re-use and/ or recycling of the materials it is composed of the equipment.
The illegal disposal of the product by the user involves the application of the penalties referred to in current laws. Any rechargeable batteries or rechargeable batteries contained in the device must be disposed of separately in the appropriate expired batteries bins.

Battery disposal

Disposal of expired batteries must take place at the appropriate recycling centers or according to local authorities. Batteries in compliance with the 2013/56 / EC directive.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>