VisionTek VT400 USB-C Portable Dock User Manual
- June 4, 2024
- VisionTek
Table of Contents
Portable Dock
User Manual
FEATURES
- Compatible with USB Type-C Laptops and Desktop Computers that support DisplayPort over USB-C
- Supports resolutions up to 4K (3840 x 2160 @ 60Hz) when using a single HDMI or DisplayPort
- Supports Extended and Mirror Display Mode.
- SuperSpeed USB 3.0, speeds up to 5Gbps and is backward compatible with 2.0/1.1
- Gigabit wired network connection
- Supports laptop charging of up to 100W via USB type-C power adapter (not included)
CONTENTS
- VT400 USB-C Portable Dock
- USB-C to USB-C Cable
- Quick Start Guide
CONNECT THE DOCK
Step 1
Connect the USB-C to the USB-C cable to the Docking Station. Plug the USB
cable into your Laptop/Desktop Computer
(Optional) Connect a USB-C Power Adapter to the USB-C Power Delivery port on
the Docking Station. Support for up to 100W of Power Delivery. Connect a USB-C
storage device to the USB-C Data port.
SETTING UP THE DOCK
Windows PC Dock Setup
Plug in your VT400 docking station and allow Microsoft Windows to
initialize the docking station.
To configure your displays, right-click on the Desktop and select Display
Settings.
Set your layout and display resolutions and apply any changes.
macOS Dock Setup
Plug in the VT400 docking station and allow macOS to initialize the docking
station.
To change preferences and configure displays, choose the Apple menu > System
Preferences, click Displays, then click Display.
INTRODUCTION
Your new USB-C Portable Station can connect to any host with Type-C connectors
that support DisplayPort over USB-C providing a future-proof docking solution.
Connect up to two additional monitors as well as 2 USB type-A and 1 USB Type-C
accessory through a single USB-C cable.
The Dual 4K Docking Station Software allows full configuration of all
additional USB displays, including:
- Expand USB 3.0 connectivity
- Supports Single DisplayPort 4K @ 60Hz
- Supports Single HDMI 4K @ 60Hz
- Supports Dual Displays 4K @ 30Hz
- Supports extended and mirrored modes via MST (only mirrored when 2 displays are connected on macOS)
- Extend left, right, above, or below
- Rotation
- Layout of displays
SYSTEM REQUIREMENTS
Windows
A system with a USB-C port that supports DisplayPort over USB-C (DP Alt Mode)
Windows 10
Windows 8.1 Update 2015
Windows 8
Windows 7
macOS
A system with a USB-C port that supports DisplayPort over USB-C (DP Alt
Mode)
Big Sur 11
Catalina 10.15
Mojave 10.14
High Sierra 10.13
Sierra 10.12
El Capitan 10.11
CONNECTTHE DOCK (continued)
Step 2
Connect your displays to the Docking Station.
(Optional) Connect an ethernet cable for wired networking. Connect additional USB devices such as a Keyboard or Mouse.
WARRANTY
VisionTek Products LLC, (“VisionTek”) is pleased to warrant to the original
purchaser (“Warranty”) of the Device (*Product”), that the product will be
free from manufacturing defects in material for Two (2) Years when given
normal and proper usage. The product must be registered within 30 days from
the original date of purchase to receive this 2-year warranty. All products
not registered within 30 days will ONLY receive a 1-year limited warranty.
VisionTek’s liability under this warranty, or in connection with any other
claim relating to the Product, is limited to the repair or replacement at
VisionTek’s option, of the product or portion of the product which is
defective in manufacturing material. Warranty assumes all risk of loss in
transit. The returned products shall be the sole property of VisionTek.
VisionTek warrants the repaired or replaced Products will be free from
manufacturing defects in material for the remainder of the warranty period.
VisionTek reserves the right to inspect and verify the defectiveness of any
products or portion of products returned. This warranty does not apply to any
software component.
FULL WARRANTY DISCLOSURE IS AVAILABLE AT
WWW.VISIONTEK.COM
The product must be registered within 30 days of purchase for the warranty to
be valid.
IF YOU HAVE QUESTIONS OR NEED ASSISTANCE WITH THIS PRODUCT,
CALL SUPPORT AT AT1866-883-5411.
© 2021 VisionTek Products, LLC. All rights reserved. VisionTek is a registered
trademark of VisionTek Products, LLC. Windows is a registered trademark of
Microsoft Corporation in the United States and other countries. macOS is a
trademark of Apple Inc, registered in the U.S. and other countries and
regions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>