THRUSTMASTER T.Flight Hotas One Joystick User Manual
- June 5, 2024
- THRUSTMASTER
Table of Contents
- TECHNICAL FEATURES
- GETTING TO KNOW YOUR HOTAS JOYSTICK
- XBOX SERIES X|S / XBOX ONE
- PC
- UPDATING YOUR JOYSTICK’S FIRMWARE
- CONSUMER WARRANTY INFORMATION
- DECLARATION OF CONFORMITY
- COPYRIGHT
- ENVIRONMENTAL PROTECTION RECOMMENDATION
- TECHNICAL SUPPORT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
THRUSTMASTER T.Flight Hotas One Joystick User Manual
TECHNICAL FEATURES
- Throttle
- USB connector
- Rudder connector: RJ12 Thrustmaster Rudder (sold separately) connector
- Rudder function via twisting handle
- Rudder locking screw on handle
- Allen key to install or separate the throttle
- Handle resistance adjustment dial
- Rudder via rocking button
- Action buttons
- VIEW – GUIDE – MENU buttons + LED indicator
- Multidirectional “Point Of View” hatswitch
- Xbox/PC selector switch
GETTING TO KNOW YOUR HOTAS JOYSTICK
THROTTLE
Your joystick features a large throttle which you can use to easily control the acceleration of your aircraft.
The throttle is detachable and may be positioned in 2 different ways, either:
Detached and separated from the joystick (to re-create authentic piloting conditions)
Attached to the joystick (for greater stability and to take up less space).
By default, the throttle comes detached from the joystick.
To attach the throttle to the joystick:
-
Turn both items upside down (the throttle and the joystick).
-
Take the Allen key (6) attached underneath the base of the joystick.
-
Position the throttle to the left of the joystick.
Insert the connecting tab on the left of the joystick’s base into the opening on the right hand side of the throttle. -
Using the key, tighten the two Allen screws underneath the base (located on the left-hand side of the joystick’s base).
-
Wind up the throttle cable and thread it through the cable guide slot.
-
Put the Allen key back in its place so as not to lose it.
Carry out this procedure in reverse to detach the throttle from the joystick
ADJUSTABLE HANDLE RESISTANCE
Depending on your style of gaming, you may wish to have an ultra-sensitive
joystick, which responds to the slightest touch, or you may prefer to have a
firmer joystick, which offers some resistance when you move it.
Your joystick’s handle resistance is adjustable, in order to adapt to all
players. To adjust it, use the handle resistance adjustment dial (7) located
underneath your joystick’s base.
RUDDER FUNCTION
Your joystick features a rudder function, which in a plane corresponds to the pedals used by the pilot to turn the steering, allowing the plane to pivot around its vertical axis (therefore making the plane turn left or right). This rudder function is accessible on your joystick by rotating the handle to the left or right.
This rudder function is accessible in three ways:
- on your joystick by rotating the handle (4) to the left or right.
- via the rocking button (8) on the throttle.
- or via the TFRP RUDDER rudder pedals system (sold separately).
If you are only using the rocking button (or if you are not using the rudder function), you can disable the handle’s rotation thanks to the locking screw (5) located on the base of the joystick. Use a flat head screwdriver to change the screw’s position and thus lock/unlock the rudder function.
INSTALLING THE TFRP RUDDER ON THE T.FLIGHT HOTAS ONE JOYSTICK
The T.Flight Hotas One joystick has 8 axes, including 3 axes reserved for the TFRP RUDDER rudder pedals system (sold separately).
The TFRP RUDDER rudder pedals system connects directly to the joystick.
- Connect the rudder pedals system’s male RJ12 connector to the female RJ12 connector (3) located at the back of the joystick.
- Connect the joystick’s USB connector (2) to one of your PC’s USB ports.
Important notes regarding the automatic calibration of axes:
- Always keep the rudder’s axis centered when connecting the TFRP rudder pedals system to the joystick. Never put your feet on the rudder pedals.
- The pedals’ 3 axes calibrate themselves automatically after a few movements and once the physical stops of the rudder’s axis and of the differential brakes’ 2 axes have been reached.
MULTIDIRECTIONAL “POINT OF VIEW” HAT-SWITCH
Your joystick features a “Point Of View” hat-switch (11) which, as its name
indicates, allows you (in games which permit) to instantly view everything
that’s going on around your plane. To do so, simply go to your game’s
configuration menu and program the different views (rear view, left view,
right view, and also external views) onto the directions of the “Point Of
View” hat-switch.
Of course, you can also use the “Point Of View” hat-switch for other functions
instead (firing, etc.).
XBOX SERIES X|S / XBOX ONE
INSTALLATION ON XBOX SERIES X|S / XBOX ONE
-
Set the selector switch (12) to Xbox before connecting the USB cable.
-
Connect the USB connector (2) to one of your system’s USB ports.
-
Switch on your console.
-
The joystick’s LED indicator lights up in white.
-
Launch a game that supports the Flight Stick mode.
You are now ready to play!
LIST OF COMPATIBLE XBOX SERIES X|S / XBOX ONE GAMES
On Xbox Series X|S / Xbox One, the T.Flight Hotas One:
- Is only compatible with the games that support the Flight Stick mode.
- Is recognized in games as a real joystick and not a gamepad, for better responsiveness and enhanced precision, and possibility to access the joystick’s options in these games.
A list of Xbox Series X|S / Xbox One games compatible with the joystick is
available at https://support.thrustmaster.com. Go to Joysticks / T.Flight
Hotas One, then select Games Settings.
This list will be added to regularly, with the arrival of new Xbox Series X|S
/ Xbox One games compatible with T.Flight Hotas One.
PC
INSTALLATION ON PC
-
Set the selector switch (12) to PC before connecting the USB cable.
-
Go to https://support.thrustmaster.com/. Click Joysticks / T.Flight Hotas One, then select Drivers. Download and install the PC driver and its customized interface for the Windows Control Panel.
-
Once the PC driver is installed, connect the USB connector (2) to one of your PC’s USB ports.
-
To access the Control Panel, select:
- Start / Apps / Thrustmaster / Control Panel (in Windows® 10 / 8.1 / 8)
- Start / All Programs / Thrustmaster / Control Panel (in Windows® 7)
The Game Controllers dialog box is displayed.
The device appears onscreen with the name T.Flight Hotas One and the status OK.
-
In the Game Controllers dialog box, click Properties to test and view all functions.
You are now ready to play!
NOTES ON PC
-
On PC, in 4/6 axes mode , the throttle’s rocking button and the rudder axis on the TFRP rudder pedals system (sold separately) are coupled with the handle’s rotation.
The joystick’s LED indicator lights up in white. -
On PC, in 5/8 axes mode, the throttle’s rocking button and the rudder axis on the TFRP rudder pedals system (sold separately) become independent of the handle’s rotation, thereby providing 3 additional progressive axes.
The joystick’s LED indicator goes off.
To instantly switch between one mode and the other, simply press the XBOX GUIDE button.
UPDATING YOUR JOYSTICK’S FIRMWARE
The firmware included in your joystick’s base can be updated to a more recent version featuring product enhancements.
To display the firmware version that your Joystick is currently using and update it if required: on PC, visit https://support.thrustmaster.com. Click Joysticks / T.Flight Hotas One, then select Firmware and follow the instructions describing the download and installation procedure.
TROUBLESHOOTING AND WARNINGS
-
My joystick doesn’t function correctly or appears to be improperly calibrated:
- Make sure that the selector switch (12) is set to the proper position (Xbox or PC) before connecting the USB cable to the console or PC.
- Switch off your console or your PC, disconnect your joystick, reconnect your joystick and then re-launch your game.
- When connecting your joystick: Leave the handle, rudder and throttle centered and do not move them (to avoid any calibration problems).
-
My joystick is too sensitive or not sensitive enough:
-
Your joystick self-calibrates on its own after you have made a few movements on the
different axes. -
In your game’s “Options / Controller / Gamepad or Joystick” menu: Adjust the sensitivity or dead zones for your controller (if this option is available).
-
Adjust the handle resistance using the dial (7) located under your joystick’s base.
-
-
The rudder function is too sensitive:
- Disable the handle’s rotation using the locking screw (5) located on the base of the joystick and use the rocking button for the rudder function.
HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)
Please visit https://support.thrustmaster.com. Click Joysticks / T.Flight Hotas One, then select Manual or FAQ.
CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at
Place du Granier, B.P. 97143, 35571 Chantepie, France (hereinafter
“Guillemot”) warrants to the consumer that this Thrustmaster product shall be
free from defects in materials and workmanship, for a warranty period which
corresponds to the time limit to bring an action for conformity with respect
to this product. In the countries of the European Union, this corresponds to
a period of two (2) years from delivery of the Thrustmaster product. In other
countries, the warranty period corresponds to the time limit to bring an
action for conformity with respect to the Thrustmaster product according to
applicable laws of the country in which the consumer was domiciled on the date
of purchase of the Thrustmaster product (if no such action exists in the
corresponding country, then the warranty period shall be one (1) year from the
original date of purchase of the Thrustmaster product).
Notwithstanding the above, rechargeable batteries are covered by a warranty
period of six (6) months from the date of original purchase.
Should the product appear to be defective during the warranty period, immediately contact Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of purchase (or any other location indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or from the date on which the product in question is made available for reconditioning, if the date on which the product is made available for reconditioning is subsequent to the date of the request for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.
This warranty shall not apply:
- if the product has been modified, opened, altered, or has suffered damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product);
- if the product has been used for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example);
- in the event of failure to comply with the instructions provided by Technical Support;
- to software, said software being subject to a specific warranty;
- to consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or headphone ear pads, for example);
- to accessories (cables, cases, pouches, bags, wrist-straps, for example);
- if the product was sold at public auction.
This warranty is nontransferable.
The consumer’s legal rights with respect to laws applicable to the sale of
consumer goods in his or her country are not affected by this warranty.
Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any
spare parts, as Technical Support is the only party authorized to open and/or
recondition any Thrustmaster product (with the exception of any reconditioning
procedures which Technical Support may request that the consumer carry out, by
way of written instructions – for example, due to the simplicity and the lack
of confidentiality of the reconditioning process – and by providing the
consumer with the required spare part(s), where applicable). Given its
innovation cycles and in order to protect its know-how and trade secrets,
Guillemot shall not provide, in principle, any reconditioning notification or
spare parts for any Thrustmaster product whose warranty period has expired.
In the United States of America and in Canada, this warranty is limited to the
product’s internal mechanism and external housing. In no event shall Guillemot
or its affiliates be held liable to any third party for any consequential or
incidental damages resulting from the breach of any express or implied
warranties. Some States/Provinces do not allow limitation on how long an
implied warranty lasts or exclusion or limitation of liability for
consequential or incidental damages, so the above limitations or exclusions
may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights which vary from State to State or Province to Province.
Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the product has been modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any use other than home use, including for professional or commercial purposes (game rooms, training, competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or manufacturing defect with respect to the product (including, but not limited to, any damages caused directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).
DECLARATION OF CONFORMITY
CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
COPYRIGHT
© 2022 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. All other trademarks are the property of their respective owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. Made in China
WARNING: This product can expose you to chemicals including Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to http://www.p65warnings.ca.gov/
ENVIRONMENTAL PROTECTION RECOMMENDATION
In the
European Union: At the end of its working life, this product should not be
disposed of with standard household waste, but rather dropped off at a
collection point for the disposal of Waste Electrical and Electronic Equipment
(WEEE) for recycling.
This is confirmed by the symbol found on the product, user manual or
packaging.
Depending on their characteristics, the materials may be recycled. Through
recycling and other forms of processing Waste Electrical and Electronic
Equipment, you can make a significant contribution towards helping to protect
the environment.
Please contact your local authorities for information on the collection point
nearest you.
For all other countries: Please adhere to local recycling laws for electrical
and electronic equipment.
Retain this information. Colours and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it
is used.
www.thrustmaster.com
*Applicable to EU, UK and Turkey only
TECHNICAL SUPPORT
THRUSTMASTER
https://support.thrustmaster.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>