kontron pITX-i.MX8M HAILO Motherboard User Guide
- June 5, 2024
- kontron
Table of Contents
- [kontron pITX-i.MX8M HAILO Motherboard
- Disclaimer
- Revision History
- Intended Use
- Kontron pitx-iMX8M HAILO
- Download and install the demo image
- Evaluation of the functionality
- About Kontron
- CORPORATE OFFICES
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
- bzcat .wic.bz2 | dd of=/dev/sdX bs=1M conv=fsync
- cd apps/detection
- ./detection.sh –input
kontron pITX-i.MX8M HAILO Motherboard[
](https://manuals.plus/wp-content/uploads/2022/07 /kontron-pITX-i.MX8M-HAILO-Motherboard.png)
Disclaimer
Kontron would like to point out that the information contained in this manual
may be subject to alteration, particularly as a result of the constant
upgrading of Kontron products. This document does not entail any guarantee on
the part of Kon-tron with respect to technical processes described in the
manual or any product characteristics set out in the manual. Kontron assumes
no responsibility or liability for the use of the described product(s),
conveys no license or title under any patent, copyright or mask work rights to
these products and makes no representations or warranties that these pro-ducts
are free from patent, copyright or mask work right infringement unless
otherwise specified. Applications that are described in this manual are for
illustration purposes only. Kontron makes no representation or warranty that
such application will be suitable for the specified use without further
testing or modification. Kontron expressly informs the user that this manual
only contains a general description of processes and instructions which may
not be applicable in every individual case. In cases of doubt, please contact
Kontron.
This manual is protected by copyright. All rights are reserved by Kontron. No
part of this document may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), without the express written permission of Kontron. Kontron points
out that the information contained in this manual is constantly being updated
in line with the technical alterations and improvements made by Kontron to the
products and thus this manual only reflects the techni-cal status of the
products by Kontron at the time of publishing.
Brand and product names are trademarks or registered trademarks of their
respective owners.
© 2021 by Kontron S&T AG
Kontron Europe GmbH Gutenbergstraße 285737 Ismaning
Germany
Tel.: +49 821 4086-0
Fax: +49 821 4086-111
info@kontron.com
www.kontron.com
Revision History
Rev. Index | Brief Description of Changes | Date of Issue |
---|---|---|
1.0 | First official version | 2022-02-22 |
1.1 | Version including DEMO setup | 2022-03-09 |
Intended Use
THIS DEVICE AND ASSOCIATED SOFTWARE ARE NOT DESIGNED, MANUFACTURED OR INTENDED
FOR USE OR RESALE FOR THE OPERATION OF NUCLEAR FACILITIES, THE NAVIGATION,
CONTROL OR COMMUNICATION SYSTEMS FOR AIRCRAFT OR OTHER TRANSPORTATION, AIR
TRAFFIC CONTROL, LIFE SUPPORT OR LIFE SUSTAINING APPLICATIONS, WEAPONS
SYSTEMS, OR ANY OTHER APPLICATION IN A HAZARDOUS ENVIRONMENT, OR REQUIRING
FAIL-SAFE PERFORMANCE, OR IN WHICH THE FAILURE OF PRODUCTS COULD LEAD DIRECTLY
TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENV-IRONMENTAL DAMAGE
(COLLECTIVELY, “HIGH RISK APPLICATIONS”).
You understand and agree that your use of Kontron devices as a component in
High Risk Applications is entirely at your risk. To minimize the risks
associated with your products and applications, you should provide adequate
design and ope-rating safeguards. You are solely responsible for compliance
with all legal, regulatory, safety, and security related requi-rements
concerning your products. You are responsible to ensure that your systems (and
any Kontron hardware or software components incorporated in your systems) meet
all applicable requirements. Unless otherwise stated in the product
documentation, the Kontron device is not provided with error-tolerance
capabilities and cannot therefore be deemed as being engineered, manufactured
or setup to be compliant for implementation or for resale as device in High
Risk Applications. All application and safety related information in this
document (including application descriptions, suggested safety measures,
suggested Kontron products, and other materials) is provided for reference
only.
Customer Support
Find Kontron contacts by visiting: http://www.kontron.com/support.
Customer Service
As a trusted technology innovator and global solutions provider, Kontron
extends its embedded market strengths into a services portfolio allowing
companies to break the barriers of traditional product lifecycles. Proven
product expertise coupled with collaborative and highly-experienced support
enables Kontron to provide exceptional peace of mind to build and maintain
successful products. www.kontron.com
For more details on Kontron’s service offerings such as: enhanced repair
services, extended warranty, Kontron training academy, and more visit
http://www.kontron.com/support-and-services/services.
Customer Comments
If you have any difficulties using this guide, discover an error, or just want
to provide some feedback, please send a mes-sage to Kontron. Detail any errors
you find. We will correct the errors or problems as soon as possible and post
the revi-sed user guide on our website.
Terms and Conditions
Kontron warrants products in accordance with defined regional warranty
periods. For more information about warranty compliance and conformity, and
the warranty period in your region, visit http://www.kontron.com/terms-and-
conditi-ons.
Kontron sells products worldwide and declares regional General Terms &
Conditions of Sale, and Purchase Order Terms & Conditions.
Visit http://www.kontron.com/terms-and-conditions.
For contact information, refer to the corporate offices contact information on
the last page of this user guide or visit our website CONTACT US.
Kontron pitx-iMX8M HAILO
Requirements
- Kontron pitx-imx8m module
- Hailo module (in Starterkit pre-installed in M.2 slot on backside of pITX-iMX8M)
- Serial connection to the Kontron pitx-imx8m module
- uSD card
- USB camera (resolution: 1280 X 720)
- HDMI monitor
Documentation
https://hailo.ai/developer-zone/documentation
Download and install the demo image
The software image can be found on the Kontron customer section https://emdcustomersection.kontron.com. Please navigate to the product „pITX-imx8m“ and use the menu „Software & Demo Images“.
-
Attach installation media (uSD card) to Linux host computer and determine a device node by analyzing system logs::
$ dmesg | tail | grep sd
Notice: An SD storage should be greater than 2 GB. -
Write the wic image to uSD card:
bzcat
.wic.bz2 | dd of=/dev/sdX bs=1M conv=fsync Notice: sdX was determined on the previous step. Make sure you have chosen the right device. Writing to the wrong device may result in loss of data.
-
Configure serial connection on J19 port (Baudrate 115200), insert uSD card into J12 and power on the board.
-
Interrupt the boot process to enter U-boot command line by pressing any key.
-
Run the following command to boot from uSD card:
=> run bootcmd_mmc1 -
After board is started login as user root. No password is needed.
Evaluation of the functionality
-
Check if hailo driver is loaded: # hailortcli scan
-
Expected output:
Hailo PCIe Devices:
[-] Device BDF: 0000:01:00.0 -
Detection example with camera stream:
cd apps/detection
./detection.sh –input
Depending on the camera specification it might be necessary to adopt the frame-rate in the file “detection.sh” in line 56.
About Kontron
Kontron, a global leader in embedded computing technology and trusted advisor
in IoT, works closely with its customers, allowing them to focus on their core
competencies by offering a complete and integrated portfolio of hardware,
soft-ware and services designed to help them make the most of their
applications.
With a significant percentage of employees in research and development,
Kontron creates many of the standards that drive the world’s embedded
computing platforms; bringing to life numerous technologies and applications
that touch millions of lives. The result is an accelerated time-to-market,
reduced total-cost-of-ownership, product longevity and the best possible
overall application with leading-edge, highest reliability embedded
technology.
Kontron is a listed company. Its shares are traded in the Prime Standard
segment of the Frankfurt Stock Exchange and on other exchanges under the
symbol “KBC”. For more information, please visit: http://www.kontron.com/
CORPORATE OFFICES
EUROPE, MIDDLE EAST & AFRICA
Lise-Meitner-Str. 3-5
86156 Augsburg
Germany
Tel.: + 49 821 4086-0
Fax: + 49 821 4086-111
info@kontron.com
www.kontron.com
NORTH AMERICA
14118 Stowe Drive Poway, CA 92064-7147 USA
Tel.: + 1 888 294 4558 Fax: + 1 858 677 0898 info@us.kontron.com
ASIA PACIFIC
1-2F, 10 Building, No. 8 Liangshuihe 2nd Street Economical & Technological
Development Zone Beijing 100070, P.R.China
Tel.: + 86 10 63751188
Fax: + 86 10 83682438
info@kontron.cn
ASIA PACIFIC
1-2F, 10 Building, No. 8 Liangshuihe 2nd Street Economical & Technological
Development Zone Beijing 100070, P.R.China
Tel.: + 86 10 63751188
Fax: + 86 10 83682438
info@kontron.cn
References
- Hailo AI Processor Documentation and Datasheets
- Kontron | Smart IoT Solutions
- Kontron | Smart IoT Solutions
- Kontron | Smart IoT Solutions
- Terms and Conditions| Kontron Embedded Computers
- Log In ‹ Customer Section — WordPress
- Error during processing.
- Hailo AI Processor Documentation and Datasheets
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>