INOGEN BA-303 One G3 External Battery Charger User Guide

June 6, 2024
inogen

INOGEN BA-303 One G3 External Battery Charger

External Battery Charger
Your Inogen One G3 External Battery Charger (BA-303) will charge your Inogen One G3 single and double batteries. It takes approximately 3 hours to charge a fully depleted single battery, and approximately 6 hours to charge a fully depleted double battery. Note: the battery will also recharge in the Inogen One G3 when powered by the
AC Power Supply, or DC Power Cable.

  1. Plug the External Battery Charger AC power supply cord into the near-est electrical outlet.
  2. Plug the External Battery Charger AC power supply into the battery charger.
  3. Slide the charger onto the Inogen One G3 Battery by clicking and locking into the charger.
  4. When the battery is in the correct position, a solid red light will indicate that the battery is charging.
  5. When the green light illuminates, the battery is fully charged*.
  6. Press battery latch down and slide charger off battery.

*If the red light is flashing, unplug the unit and complete steps 2-3 again. If a red flashing light continues after these steps, contact your Equipment Provider.

©2021 Inogen. All rights reserved www.inogenone.com www.OxygeNation.com

Your Equipment Provider:

Your Physician:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals