SINJI SIDC-0100 Doorbell Camera User Manual

SINJI SIDC-0100 Doorbell Camera

Product Information

Specifications

• Model: SIDC-0100 / SIDC-0109
• Power supply: 5V DC (USB charger)
• Battery: 3.7V Lithium (rechargeable)
• Battery capacity: 800 mAh
• Battery life: ~1 month @5x/day for 2 minutes at a time or ~300 minutes continuous use time
• Video stream quality: 1280*720 / 30 fps
• Video type: Activate and stream on call only
• Infrared vision: 850nm, 5m effective distance
• Connectivity: Wifi 2.4 GHz
• IP rating: IP53
• Main material: Plastic
• Dimensions doorbell: 85x54x24 mm
• Dimensions chime: 55x43x25 mm
• Gross weight: 106 gr
• Camera angle: [Not specified]

Product Usage Instructions

Connecting the Sinji Doorbell Camera to the app

1. Download the Smart Life app for iOS or Android for free.
2. Follow the instructions shown in the app.
3. Add the Sinji Doorbell Camera to the app in one of 2 ways:
   • A. By scanning the QR code:
   1. Switch the doorbell camera on by ringing it.
   2. Make sure your smartphone is connected to your Wi-Fi network (2.4 GHz).
   3. Open the Smart Life app and press ‘+’ sign in the top right of the main screen to add a device.
   4. Press the square with the dash in it at the top right of the screen.
   5. Your phone’s camera will open, give the app access if necessary, use it to scan the QR code below to add the Doorbell Camera.
   • B. Manually adding the Doorbell Camera:
   1. [Not specified]

Pairing the doorbell camera and the chime

1. Plug in the chime to a USB port (Preferably USB-A 5V 1A).
2. Press the pairing button on the chime for 3 seconds, until the indicator light starts blinking.
3. Press the doorbell button on the doorbell camera. If the chime rings, the pairing has been successful.

Installing the Sinji Doorbell Camera

Note : Instead of the screws (step 1-4), you can also use the double- sided tape pad to stick it to a surface. Make sure all surfaces the tape will be adhered to are smooth and cleaned.

1. Use the mounting bracket to mark the holes on the surface where you want to place the doorbell camera.
2. Drill the holes about 3cm deep using a 6mm drill.
3. Insert the wall plugs into the holes.
4. Screw the bracket into place with the hooks angled upwards.
5. Place the doorbell camera onto the bracket.
6. Use the small screw on the bottom right of the doorbell camera to secure it in place.

Operation instructions
[Not specified]

Cleaning and maintenance
[Not specified]

Troubleshooting
[Not specified]

Disposal of electrical and electronic equipment
[Not specified]

Safety warnings
[Not specified]

FAQ
[No FAQs provided]

DOORBELL CAMERA
User Manual

CONTENTS

• 1x Sinji Doorbell Camera
• 1x Chime
• 1x USB-A to USB-C charging cable
• 1x Wall mounting plate
• 2x Mounting screws
• 2x Wall plugs
• 1x Securing screw
• 1x Double-sided tape pad
• 1x User manual

Go to support.installtuya.com, or scan the QR-code for a manual in French, German, Spanish, Italian, Dutch or Polish.

1. Microphone
2. Camera
3. Light sensor
4. Doorbell button
5. Status LED
6. Reset button
7. Speaker
8. USB-C charging port
9. Status LED chime
10. Speaker chime
11. Pairing button
12. Volume button (mute, low, medium & high)
13. Jingle selection button (20 jingles)
14. USB-A power connector

TECHNICAL SPECIFICATIONS

Model SIDC-0100 / SIDC-0109

• Power supply 5V DC (USB charger)
• Doorbell – chime range 100m (unobstructed)
• Battery 3.7V Lithium (rechargeable)
• Battery capacity 800 mAh
• Battery life ~1 month @5x/day for 2 minutes at a time [or] ~300 minutes continuous use time
• Video stream quality 1280*720 / 30 fps
• Video type Activate and stream on call only
• Infrared vision 850nm, 5m effective distance
• Connectivity Wifi 2.4 GHz
• IP rating IP53
• Main material Plastic
• Dimensions doorbell 85x54x24 mm
• Dimensions chime 55x43x25 mm
• Gross weight 106 gr
• Camera angle 90°

USER MANUAL

1. Connecting the Sinji Doorbell Camera to the app
2. Pairing the doorbell camera and the chime
3. Installing the Sinji Doorbell Camera
4. Operation instructions
5. Cleaning and maintenance
6. Troubleshooting
7. Disposal of electrical and electronic equipment
8. Safety warnings

CONNECTING THE SINJI DOORBELL CAMERA TO THE APP

1. Download the Smart Life app for iOS or Android for free.
2. Follow the instructions shown in the app.
3. Add the Sinji Doorbell Camera to the app in one of 2 ways:

A. By scanning the QR code
B. Manually adding the Doorbell Camera

A. Scanning the QR code

1. Switch the doorbell camera on by ringing it.
2. Make sure your smartphone is connected to your Wi-Fi network (2.4 GHz).
3. Open the Smart Life app and press ‘+’ sign in the top right of the main screen to add a device.
4. Press the square with the dash in it at the top right of the screen.
5. Your phone’s camera will open, give the app access if necessary, use it to scan the following QR code below to add the Doorbell Camera.
6. Follow the steps in the app to complete the installation.

Note: If the Doorbell Camera is not in pairing mode (quick blinking LED), use a small blunt pin to push and hold the reset button on the back for 10 seconds until you have heard 2 sounds. (First a normal ring after 5 seconds and then a second, reset confirmation, sound.)

B. Manually adding the Doorbell Camera

1. Switch the doorbell camera on by ringing it.
2. Make sure your smartphone is connected to your Wi-Fi network (2.4 GHz).
3. Find the Doorbell Camera in the list of products and follow the steps in the app to complete the installation.

PAIRING THE DOORBELL CAMERA AND THE CHIME

Tip: Pair the doorbell camera and chime first, before mounting the doorbell camera on its bracket.

1. Plug in the chime to a USB port (Preferably USB-A 5V 1A).
2. Press the pairing button on the chime for 3 seconds, until the indicator light starts blinking.
3. Press the doorbell button on the doorbell camera. If the chime rings the pairing has been successful.

INSTALLING THE SINJI DOORBELL CAMERA

Note : Instead of the screws (step 1-4) you can also use the double-sided tape pad to stick it to a surface. Make sure all surfaces the tape will be adhered to are smooth and cleaned.

1. Use the mounting bracket to mark the holes on the surface where you want to place the doorbell camera.
2. Drill the holes about 3cm deep using a 6mm drill.
3. Insert the wall plugs into the holes.
4. Screw the bracket into place with the hooks angled upwards.
5. Place the doorbell camera onto the bracket.
6. Use the small screw on the bottom right of the doorbell camera to secure it in place.

OPERATION INSTRUCTIONS

Look at ‘Contents’ for an overview of the various buttons and features.
When someone rings the doorbell a push notification and call will be send to every phone that has been added to the family and the Chime will sound. It will appear on your screen as a regular phone call with an added preview of the camera feed.
The doorbell camera only provides a video feed when the doorbell is rung. After 30 seconds it will turn off. If you open the doorbell (in the app) in the next 30 seconds, it will be activated again. There is only a live video feed within this timeframe. The video is one-way, the audio two-way. Note: Many functions can only be used during this active period.

CLEANING AND MAINTENANCE

1. Unplug the chime & remove the doorbell from its mount.
2. Clean the doorbell and chime with a soft cloth, a mild cleaning agent and as little water as possible.
3. Immediately dry them with a soft cloth afterwards.
4. Once everything is dry you can plug the chime back in and put the doorbell back in its bracket

TROUBLE-SHOOTING

All common problems and their solutions can be found at support.installtuya.com scan the QR code on the contents page of this manual.

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

In accordance with European directives applicable to this product.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

SAFET Y WARNINGS

• Do not submerge in water.
• Be aware of privacy rules. Check your local laws and regulations with regards to what is allowed to be recorded on video. For instance, it is often not allowed to record public spaces or a neigh- bour’s front door, even if it is only in the background.
• Do not connect the Doorbell Camera to any other power source than 5V USB-C.
• The Sinji Doorbell Camera is not compatible with classic Doorbell transformers.

© 2023, Sinji. All rights reserved. www.sinjiproducts.com
Made in China

References

• Tuya Support
• Sinji

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>