SINJI 1500W Smart Panel Heater User Manual
- June 13, 2024
- SINJI
Table of Contents
SINJI 1500W Smart Panel Heater
INTRODUCTION
DESCRIPTION
Always keep your bedroom, living room or outdoor toilet at the desired
temperature with the Smart Panel Heater! For example, let it start heating
before you wake up, or stop heating when the sun goes down. Make heating as
smart as you want with
self-programmed schedules.
CONTENTS
- 1 x Smart Panel Heater 2x base
- 6X plug
- Bx M48mm screws 6x M435mm screws 1 x remote control
- 4X mounting bracket 1 x operating manual
USER MANUAL
- I nstal I the Smart Life app
- Add the Smart Panel Heater to the app
- Install the Smart Panel Heater
INSTALL THE SMART LIFE APP
-
Download the Smart Life app for iOS or Android for free.
-
Open the Smart Life app and tap ‘Register’ or log in with an existing account.
-
Read the privacy policy and tap ‘Agree’ to continue.
-
Please enter your e-mail address to receive a verification code, which will be sent to the e-mail address provided.
-
Enter the verification code to proceed to the next screen.
-
Choose a secure password and tap the button to complete your registration.
-
Go to ‘Account’ and tap ‘Family management’ to set up your smart home. Enter a name for your smart home and select which rooms you want to add.
-
Tap ‘Done’ to complete the installation.
ADD THE SMART PANEL HEATER TO THE APP
The Smart Panel Heater can be added in two different ways
- By scanning the QR code
- Manually
Scanning the Qr Code
- Switch on the Smart Panel Heater.
- Make sure your smartphone is connected to your Wi-Fi network*.
- Open the Smart Life app and tap ‘+’ to select the device you want to add.
- Open the Smart Life app and press the plus sign in the top right of the main screen to add a device
And then press the square with the dash in it on the top right
Your phone’s camera will open, then scan the following qr code with your phone to add the Smart Panel Heater
Follow the steps in the app to complete the installation.
lf the Panel Heater does not flash quickly, reset it by putting it in standby
mode and pressing the power button for 5 seconds.
Manually adding the Smart Panel Heater
- Switch on the Smart Panel Heater.
- Make sure your smartphone is connected to your Wi-Fi network.
- Open the Smart Life app and tap ‘+’ to select the device you want to add.
- Select “small household appliances”.
- Select “heating (wifi)”.
- Follow the steps in the app to complete the installation.
INSTALL THE SMART PANEL HEATER
Before installation, check that all parts are complete and the product is
intact.
The Smart Panel Heater can be installed free-standing or on the wall.
Freestanding installation
If you want to use the electric heater as a free-standing unit, mount it with
the feet provided and follow the instructions below. Ensure that the heater is
mounted on a flat, stable and clean surface.
- Turn the product upside down on a soft cotton cloth or carpet to avoid damage.
- Attach the feet to the bottom of the heating element with the screws provided. Align the holes in the foot with the holes in the feet, insert the screws through the holes and tighten them with a screwdriver.
Installation on the wall
- Take 4 brackets, 6 plugs and 6 screws from the box, and attach 2 brackets to the wall according to the distances between the holes of the bracket, as shown in the illustration below. Use the included measuring template to easily drill the holes in the right position
Attach 2 brackets to the bottom of the product, as shown in the picture below.
Hold the side of the Smart Panel Heater, look at the position of the wall slot of the back cover, and slide the wall to the top of the slot.
Note: Before drilling, make sure that there are no cables or other pipes on or
in the wall in order to prevent damage. Remember that the screws must be
firmly and securely seated in the wall to ensure safe installation of the
electric heater on the wall. Observe the safe distance below.
During installation, ensure that the heating element is placed at a safe
distance from flammable materials, gas and water.
When installed on the wall, the installation height must be more than 15 cm
from the ground and at least 50 cm from the ceiling.
THE CONTROL PANEL
Switching on and off
The heater emits a beep when it is switched on. The heater will start in
standby mode, displaying the WiFi symbol and the current temperature of the
room.
Press the ON/OFF button. You see the heating icon and the ECO mode icon. This
means that the device is in ECO mode.
Changing the heating mode
To change the heating mode, press the MODE button to cycle through the modes:
ECO mode, Comfort mode and Anti-freeze mode. The mode icons will flash as you
go through them. After a few seconds the icon will stop flashing and the
heater will start heating in that mode.
Setting the desired temperature
The set temperature of Eco mode and Comfort mode can be adjusted with the UP
and DOWN buttons. The temperature range is from 5°C to 50°C. In Antifreeze
mode, the Smart Panel Heater will ensure that the temperature always remains
above 5°C.
Timer for switching off
To set the timer, press the TIME button while the heater is in heating mode.
The timer range is 1 – 24 hours. The numbers will flash during the setting
process and then the display will return to heating mode. The timer icon on
the display indicates that the timer has been set. The heater will continue to
heat until the set time has elapsed.
Time for switching on
To schedule your heating to turn on later, press the TIME button in standby
mode. U. The delay range is 1 – 24 hours. The numbers will flash during the
setting process and then the display will return to heating mode. The timer
icon on the display indicates that the timer has been set. The heater will be
switched on when the delay has elapsed.
Child lock
To activate the padlock, press and hold the UP button. The padlock icon will
appear on the screen and the control panel will be locked. To unlock, press
and hold the DOWN button. The padlock icon will disappear, indicating that all
buttons can be used again.
Switching off the display
Pressing and holding the time button will turn off the display illumination.
Press any button later to turn the display back on. When the display is off,
the Smart Panel Heater can still be operated via the app, but it will not make
any sound when changing settings.
Remote control
The remote control button and functions are all the same, but the buttons on
the remote control do not have a “hold” function. The range of the remote
control is 2 metres.
USING SMART FUNCTIONS
The same actions can be performed in the Smart Life app as on the control
panel.
In addition, smart scenarios can be set, which allow the device’s settings to be adjusted when various conditions are met. For example, weather conditions that require the device to be on or off, or sunrise or sunset that require the device to be on or off. You can also create scenarios in which the device works together with other Smart Home devices that you have added to the Smart Life app.
Creating a scenario
- Go to the main screen of the Smart Life app 2. Press “Smart” at the bottom\
Then press the plus sign in the top right corner to create a new scenario.
A scenario consists of the following components
- The conditions that the scenario must fulfil (e.g. 10 a.m., sunrise, when another device turns on).
- The device that should do something (e.g. the Smart Panel Heater).
- The action to be performed by the unit (e.g. switch off, switch on, set another temperature).
- (optional) Additional follow-up actions (e.g. pause, switch off again, adjust temperature).
An example is shown below
SAFETY TIPS
- Do not allow bare skin to come into contact with the surface of the device during operation: risk of burns.
- The heating element is suitable for indoor use only. Do not use it outdoors.
- Do not use the heating element near flammable or explosive materials: fire or explosion hazard.
- It is strictly forbidden to insert any objects into the protective grille of the heating unit as there is a danger of electric shock.
- Remove the plug from the socket if the heating device is not used for a long time.
- Never cover the heater. If you cover the heating element, you risk overheating and causing a fire.
- This device is not intended for use in bathrooms, washrooms or similar places where moisture can occur. Never place the heating element in a place where it may fall into a bathtub or other water container.
CLEANING
Always disconnect the appliance and allow it to cool down completely before
carrying out maintenance. Use a hoover to remove dust on grilles. Clean the
outside of the unit with a damp cloth and then dry it with a dry cloth. Never
immerse the appliance in water or allow water to drip into it.
STORAGE
Always disconnect the unit, let it cool down completely and clean it before
storing it. If you are not going to use the unit for a long time, put the unit
and the instructions back in the original box and store it in a dry and
ventilated place. Do not place heavy objects on the box during storage as this
may damage the appliance.
OBLEMSANDSOLUTIONS
Problem : The Smart Panel Heater does not turn on.
Cause : Device is tilted.
Solution : Install the device in an upright position. It has a sensor
that switches it off if it is tilted or falls over.
Problem : The Smart Panel Heater does not connect to my network.
Cause : Wifi netwerk is Dual Band van 5GHz.
Solution : Change the settings of your router so that your network only
transmits 2.4GHz. If necessary, switch off Dual band
temporarily or rename the 5GHz network.
Problem : The Smart Panel Heater does not connect to my network.
Cause : The Smart Panel Heater is not in pairing mode.
Solution : Reset the Smart Panel Heater by pressing and holding the power
button for 5 seconds.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>