InWin Mercury AM120S High Performance Silent Cooling Fan User Manual

InWin Mercury AM120S High Performance Silent Cooling Fan User Manual

Product Video Information

Mercury AM120S Product Video

Mercury AM120S Installation Video

Product Story

Mercury AM120S is a slender cooling fan designed by InWin. Mercury emits a silent 17 – 29 dB(A) noise level due to the carefully constructed fan blades and inner frame. The overall construction not only presents silent  operation, but enhances thermal efficiency too. TheARGB, slenderized 20mm-thick cooling fan offers space conservation, providing more flexibility within a confined enclosure.

Light up your build with the ARGB LEDs to make your PC as vibrant as the cosmos! . Mercury delivers more than just pretty lights; they are versatile enough to perform superbly on radiators too.

Package Contents

Triple Pack

1. Mercury AM120S Fans x 3
2. Screws x 12
3. ARGB One-Click Controller x 1
4. ARGB Extension Cables 500 mm x 2
5. PWM Fan Extension Cables 500 mm x 2

Single Pack

1. Mercury AM120S Fan x 1
2. Screws x 4
3. ARGB Extension Cable 500mm x 1
4. PWM Fan Extension Cable 500mm x 1

Specifications

• Model Mercury AM120S

• Quantity Included Single Pack Triple Pack

• Model Number IW-FN-AM120S-1PK IW-FN-AM120S-3PK

• Colors Black

• Fan Size 120 x 120 x 20 mm

• Materials PBT, PC

• Rated Voltage DC 12V

• Rated Power 1.8W

• Rated Current 0.15A

• ARGB Rated Voltage DC 5V

• ARGB Rated Power 1.4W

• ARGB Rated Current 0.28A

• Speed Mode PWM 400 – 2000 +/- 10% RPM

• Air Flow 60.71 CFM

• Air Pressure 2.72 mm / H2O

• LED Addressable RGB

• Connector (Fan to Fan) Non-Modular Cables

• Connector to M/B 4-Pin (12V, PWM), 3-Pin (5V, ARGB)

• Noise Level 17 – 29 dB(A

• Bearing Type Long Lifespan Sleeve Bearing
  Net Weight 138 g / 0.3 lbs
  418 g / 0.92 lbs

• Gross Weight 184 g / 0.4 lbs
  519 g / 1.14 lbs

• Package Dimension (L x W x H)
  165 x 125 x 25 mm
  165 x 125 x 65 mm
  6.49 x 4.92 x 0.98″
  6.49 x 4.92 x 2.55″

• Warranty 3 Years

• Specifications may vary based on different regions.

• InWin products comply with RoHS regulations.

Cable Information

Installation

1. Please make sure the power is off.

2. Install the fans in your PC case and mount them in the designated areas.
   *How to determine your airflow direction: The arrow shows the intake direction of the air blowing through.

3. How to attach the fans and connect to a motherboard
   

4. You can use ARGB extension cables and PWM fan extension cables for the following reasons:
   a. The distance between fans are too far away.
   b. The distance between the fan to the M/B is too far away.
   c. The distance between the fan to the ARGB One-Click Controller is too far away.

Use the ARGB Extension Cable ONLY on the ARGB One-Click Controller.

Note: The AM120S is 20mm thick. If paired with a liquid-cooling system, please use the appropriate screw-length to avoid puncturing the radiator. Make sure the fan installed securely and correctly.

If your motherboard does not support a 3-Pin ARGB header (5V, ARGB), please use the included ARGB One-Click Controller to connect to your PSU’s SATA cable and the fan’s ARGB Cable in order to use the 14 different lighting effects. (Only in Triple Pack)

Hold the button to turn on or off the lights.
Tap the button to change the lighting modes.

1. Rainbow
2. LED-Red Breathing
3. LED-Green
4. LED-Blue
5. LED-Purple
6. LED-White
7. Light at the end of the Tunnel
8. Two-Tone Ring
9. Diagonal Transition
10. Rotating LED Trio
11. Full Circle
12. Flow-Red
13. Flow-Green
14. Flow-Blue

Troubleshooting

If your fan does not operate properly, please follow the instructions below:

1. Please check your system’s power.
2. Please make sure all the connectors are connected properly.
3. For more technical support, please visit InWin Forum at
   https://forum.in-win.com/

Important Notes

1. Please install the fans by following our instructions.
2. When storing the fans, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.
3. Please do not put anything in the impeller.
4. Please do not modify the wires or the connectors provided by InWin.
5. Please do not touch the fan blades when the fan is in operation.
6. Please only use your fan in a computer case.
7. Please keep this product away from any liquids.

*InWin reserves the right to change the lighting modes.

• For more installation instructions, please scan the QR Code or watch the video in the website link: https://youtu.be/_S_LLcqe0KI .

References

• Forums - InWin Forums

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>