InWin DN120 Pro Grade Static Pressure Fan User Manual
- May 15, 2024
- InWin
Table of Contents
InWin DN120 Pro Grade Static Pressure Fan User Manual
Product Video Information
Neptune Series Product Video
Neptune DN120 PRO / DN140 PRO Installation Video
Product Story
Neptune’s Ultimate Pro Grade Fan
The DN PRO fans are the flagship fan of the Neptune series. These silent,
high-static pressure fans achieve this notoriety with their revolutionary
blade design, emphasizing aerodynamics and acoustic control. The DN Pro fans
feature a three-phase, six-pole motor, contributing to the pro-grade cooling
performance.
Pairing the Fluid Dynamic Bearings (FDB) and the copper bearing shield
provides a more balanced and stable fan.
Package Contents
Neptune DN120 PRO Single Pack
- Neptune DN120 PRO Fan x 1
- Fan Screws x 6
- Radiator Screws 30 mm x 4
- Radiator Screws 32 mm x 4
- PWM Fan Extension Cable 500 mm x 1
Neptune DN120 PRO Fan x 1
- Neptune DN140 PRO Fan x 1
- Fan Screws x 6
- Radiator Screws 30 mm x 4
- Radiator Screws 32 mm x 4
- PWM Fan Extension Cable 500 mm x 1
Specifications
DN120 PRO
DN140 PRO
- InWin products comply with RoHS regulations.
- Specifications may vary based on different regions.
Cable Information
PWM Fan Cable
| 
|
PWM Fan Extension Cable
| 
|
Installation
-
Please make sure the power is off.
-
Install the fans by mounting them in the designated areas.
(1) Determine your airflow direction:
The following arrow indicates the direction the air will be blowing.
-
Determine your cooling setup and select the right screws:
| |
---|---|---
Fan Screws| Radiator Screws 30 mm| Radiator Screws 32 mm
|
|
-
How to daisy-chain fans to a motherboard:
- Please note that the package contains only one fan.
5. Use PWM fan extension cables for the following reasons only:
a. The distance between fans are too far away.
b. The distance between the fan to the M/B is too far away.
PWM Fan Extension Cable
Troubleshooting
If your fan does not operate properly, please follow the instructions below:
- Please check your system’s power.
- Please make sure all the connectors are connected properly.
- For more technical support, please visit InWin Forum at https://forum.in-win.com/
Important Notes
- Please install the fans by following our instructions.
- When storing the fans, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.
- Please do not put anything in the impeller.
- Please do not modify the wires or the connectors provided by InWin.
- Please do not touch the fan blades when the fan is in operation.
- Please only use your fan in a computer case.
- Please keep this product away from any liquids.
Copyright © 2023 In Win Development Inc. All Rights Reserved
CONTEMPORARY & INNOVATIVE
WWW.in-win.com
