InWin LUNA AL120 High Performance ARGB Case Fan User Manual

June 6, 2024
InWin

InWin logo

InWin logo2

High Performance ARGB Case Fan
User Manual

InWin LUNA AL120 High Performance ARGB Case Fan

Product Video Information

InWin LUNA AL120 High Performance ARGB Case Fan - qr1

https://youtu.be/cd0gYQh5Wtc

Luna Series Product VideoInWin LUNA AL120 High Performance ARGB Case
Fan - qr2

https://youtu.be/_S_LLcqe0KI

Luna Series Installation Video

InWin LUNA AL120 High Performance ARGB Case Fan

Shoot for the moon
InWin’s Luna AL120 will keep your PC cool with high airflow up to 82.96 CFM. Its highly optimized P/Q curve shows that Luna AL120 is suitable for static pressure and airflow demanding operations. Luna AL120 is the result of InWin’s constant effort and commitment to achieving excellence. This High-Performance case fan will not only keep your system as cool as the dark night, but through its nine crescent white blades, the ARGB colors will shine even more brightly and colorfully, presenting your build in the most beautiful light possible.

Package Contents

Triple Pack

  1.  Luna AL120 Fans x 3
  2. Screws x 12
  3. ARGB One-Click Controller x 1

InWin LUNA AL120 High Performance ARGB Case Fan - Triple
Pack

Single Pack

  1. Luna AL120 Fan x 1
  2. Screws x 4

InWin LUNA AL120 High Performance ARGB Case Fan - Single
Pack

Cable Information

PWM Fan Cable, Addressable RGB Cable

InWin LUNA AL120 High Performance ARGB Case Fan - RGB
Cable

ARGB One-Click Controller

Note: Only in Triple Pack

InWin LUNA AL120 High Performance ARGB Case Fan - Triple
Pack2

Installation

  1. Please make sure the power is off.
  2. Install the fans in your PC case and mount them in the designated areas.
  3. PWM Fan Cable, Addressable RGB Cable, and their counterparts are attached to each fan. Please connect as followed:

(a.b) Connect the fan’s Addressable RGB Cable to a bmotherboard’s 3-pin addressable RGB header. Connect the attached PWM Fan Cable to the motherboard’s fan header.
(C.d) Installing the 2nd fan: Connect the Addressable RGB Cable and connect it to the available 3-pin Addressable RGB header on the previous fan. Connect the fan to the available fan header from the previous fan.

InWin LUNA AL120 High Performance ARGB Case Fan -
header

4. Installing the 3rd fan: Repeat ( c d)

Installation

If your motherboard does not support an addressable header, please use the included Addressable RGB Controller to connect to your PSU’s SATA cable and the fan’s  Addressable RGB Cable in order to use the 14 different lighting effects. (Only in Triple Pack)

InWin LUNA AL120 High Performance ARGB Case Fan -
Cable

Hold the button to turn on or off the lights. Tap the button to change the lighting modes.

1 Rainbow
2 LED-Red Breathing LED-Green
3 LED-Blue
4 LED-Purple
5 LED-White
6 Light at the endof the
7 Tunnel
8 Two-Tone Ring
9 Diagonal Transition
10 Rotating LED Trio
11 Full Circle
12 Flow-Red
13 Flow-Green
14 Flow-Blue
  • InWin reserves the right to change the lighting modes.
  • For more installation instructions, please scan the QR Code below or watch the video in the website link: https://youtu.be/_S_LLcqe0KI

InWin LUNA AL120 High Performance ARGB Case Fan - qr3

https://youtu.be/_S_LLcqe0KI

Troubleshooting

If your fan does not operate properly, please follow the instructions below:

  1. Please check your system’s power.

  2. Please make sure all the connectors are connected properly.

  3. Please install the fans by following our instructions.

  4.  When storing the fans, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.

  5.  Please do not put anything in the impeller.

  6.  Please do not modify the wires or the connectors provided by InWin.

  7. Please do not touch the fan blades when the fan is in operation.

  8. Please only use your fan in a computer case.

  9. Please keep this product away from any liquids.

Specifications

InWin LUNA AL120 High Performance ARGB Case Fan -
fig1

Model Luna AL120
Quantity Included Single Pack Triple Pack
Model Number IW-FN-AL120-1PK IW-FN-AL120-3PK
Colors Black
Fan Size 120 x 120 x 25 mm
Materials PC, PBT
Rated Voltage DC 12V
Rated Power 3.96W
Rated Current 0.33A
ADD RGB Rated Voltage DC 5V
ADD RGB Rated Power 1.5W
ADD RGB Rated Current 0.3A
Speed Mode PWM 400-1800+/-10% RPM
Airflow 82.96 CFM
Air Pressure I 2.31 mm / H20
LED Addressable RGB
Connector (Fan to Fan) Non Modular Cables
Connector to M/B 4-Pin (PWM, 12V), 3-Pin (ARGB, 5V)
Noise Level 25 dB(A) (Normal)
Bearing Type Long Lifespan eve Bearing
Net Weight 133 g 399 g
Gross Weight 169 g g
Package Dimensions (LxWxM) 185 x 125 x 30 mm 85 x 125 x 82 mm
Warranty I 2 Years

CONTEMPORARY & INNOVATIVE
www.in-win.com
Copyright © 2021 In Win Development Inc. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals