KOHLER R77364T-CP Luxe Hygiene Spray Installation Guide
- June 6, 2024
- Kohler
Table of Contents
Installation guide
Install the bracket
NOTE: The recommended bracket height from the floor is 60-70 cm.
- Position the bracket on the finished wall, and mark the location of the center mounting holes.
- Drill the holes at the marked location.
- For the concreted wall, insert the anchors into the finished wall.
- Position the bracket against the finished wall, secure the bracket with screws.
- Add the rubber cap (arrow up) into the bracket.
Install the spray hose
- Run water through the water supply pipe to flush out dirt and debris.
- Turn off the water supply.
- Ensure that the screen washer is placed into the hose, then 2 tighten the hose to the tee (Provides) or the 1 shut-off valve(Not provided).
- Turn on the main water supply and check for proper operation.
- If your home’s pressure is greater than 2 bar, close the shut-off valve after every use.
- Use the shut-off valve to adjust the spray’s 4 flow intensity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>