EDIFIER R1280DBS Powered Bluetooth Speakers Brown Wood User Manual
- June 6, 2024
- Edifier
Table of Contents
R1280DBS Powered Bluetooth Speakers Brown Wood
User Manual
Important safety instruction
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
Thank you for purchasing Edifier R1280DB multimedia speakers. Please read this
manual carefully before operating this system.
The lightning flash with an arrowhead inside the triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons.
To prevent the risk of electric shock, do not remove the cover (or back). No user-serviceable Parts inside. Refer servicing to qualified Service personnel only.
The exclamation point inside the triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
-
Read these instructions.
-
Keep your user manual.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with a dry cloth.
-
Do not use this apparatus near water and never put this apparatus into liquids or allow liquids to drip or spill onto it.
-
Do not place appliances filled with water on this apparatus, such as a vase; nor place any form of open fire such as a lit candle.
-
Do not block any ventilation openings. Please leave enough space around the speakers to ensure good ventilation (the distance should be above 5cm).
Install in accordance with the manufacturer’s instructions. -
Do not place near any heat sources such as a radiator, heat register, stove, or other apparatus (including amplifier) that produce heat.
-
Do not disregard the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the outlet. -
Protect the power cord from damage or getting pinched particularly at plugs, receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus is damaged, such as power supply cord or plug, liquid spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The MAIN plug is used as the disconnecting device, the disconnecting device shall remain readily operable.
-
The maximum ambient temperature is 45°C / 113°F
-
Do not use strong acid, strong alkali, and other chemical solvents to clean the product surface. Please use neutral solvent or water to clean the product.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safe connection to electrical earth.
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell
battery is swallowed, it can cause severe internal burns in just 2 hours and
can lead to death.
Keep new and used batteries away from children, if the battery compartment
does not close securely, stop using the product and keep it away from
children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
The battery (in remote control) shall not be exposed to excessive heat such as
sunshine, fire, or the like.
In The Box
Speaker Controls
1. Infrared receiver
2. Treble dial
3. Bass dial
4. Master volume control/ input selection
Press in to navigate between audio sources: LINE1 >
LINE2->Optical->Coaxial->Bluetooth.
Note: Press and hold the master volume control to enter into standby mode.
5. Power indicator
Red: optical/coaxial inputs
Blue: Bluetooth input
Green: Line in1/Line in2 inputs| 6. Speaker output
7. Power switch
8. Power cord
9. Line in1 input port
10. Line in2 input port
11. Optical input port
12. Coaxial input port
---|---
Remote Control
| 1. Power ON/OFF | 7. Optical input |
|---|---|
| 2. Mute | 8. Coaxial input |
| 3. Volume decrease | 9. Bluetooth input (Press and hold to disconnect |
Bluetooth devices)
4. Volume increase| 10. Pause/play (for Bluetooth only)
5. Line in1 input| 11. Previous track (for Bluetooth only)
6. Line in2 input| 12. Next track (for Bluetooth only)
Battery loading:
Please refer to the illustration to open the battery compartment, insert the
CR 2025 battery and close the compartment
Note:
- Do not place the remote control in places that are hot and humid.
- Do not charge the batteries.
- Remove the batteries when unused for a long period of time.
- The battery should not be exposed to excessive heat such as direct sun, fire, or similar.
- Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
Connections
Connect the speakers with the included speaker connecting cable- Connect to a power source, power on the speaker, then the indicator is lit.
LINE IN Input
- Press the master volume control on the active speaker or press the “LINE 1/LINE2” button on the remote control to select LINE IN input. The indicator turns green.
- Using an audio cable to connect an audio source to the speaker.
- Play from your device and adjust the volume accordingly.
Optical and Coaxial Input
- Press the master volume control on the active speaker or press the “OPT/COX” button on the remote control to select the optical/coaxial input. The indicator turns to red.
- Using optical or coaxial cable (optical cable included) to connect audio sources to your speaker.
- Play from your devices and adjust the volume accordingly.
Note:
- In optical and coaxial modes, only PCM signals with 44.1KHz/48KHz can be decoded.
Bluetooth Input
Pairing
- Turn on the speaker and switch to Bluetooth mode by pressing the Bluetooth button on the remote control or pressing the master volume control on the back panel of the active speaker. The indicator turns to blue.
- Go to the setup section on your source devices (mobile phones, tablets, etc.) and search for nearby Bluetooth devices, you will find “EDIFIER R1280DB” in the list.
- Pair your device with “EDIFIER R1280DB”.
- Play audio tracks on your device and adjust the volume to the desired level.
- To disconnect Bluetooth, press and hold the master volume control for about 2 seconds.
Note:
- Bluetooth connectivity and compatibility may be different among different source devices, depending on the software versions of source devices.
- To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports A2DP and AVRCP profile.
- PIN code for connection is “0000” if needed.
Specifications
| Power output: | L/R: 21W+21W |
|---|---|
| Signal to noise ratio dB(A): | L/R: ≥85dB（A） |
| Noise level: | ≤25dB(A) |
| Input sensitivity: | LINE IN1: R/L:450±50mV |
LINE IN2: R/L:550±50mV
OPT/COA R/L: 500±50mFFS
Bluetooth: R/L:700±50mFFS
Frequency response:| 55Hz-20KHz
Bass unit:| 4 inch (116mm)
Tweeter unit:| Φ13mm silk dome tweeter
Troubleshooting
| Problem | Solution |
|---|---|
| No sound | •Check if the power indicator light is ON |
•Try to turn up the volume using either the master volume control or remote
control.
•Ensure the audio cables are firmly connected and the input is set correctly
on the speakers.
•Check if there is a signal output from the audio source.
Cannot connect via Bluetooth| •Make sure the speaker is switched to Bluetooth
input, in other audio input modes Bluetooth can not be paired or connected.
Disconnect from any Bluetooth device by pressing and holding the volume dial
in Bluetooth mode, then try again.
•Effective Bluetooth transmission range is 10 meters, please make sure
operation is within the range.
•Try another Bluetooth device for connection.
The R1280DB does not turn on| •Check if mains power is connected. or if the
wall outlet is switched on.
If you want to find out more about EDIFIER, please visit our website at
www.edifier.com
For Edifier warranty queries, please visit the relevant country page on our
www.edifier.com and review the section Warranty
Terms.
USA and Canada: service@edifier.ca South America:
Please visit www.edifier.com (English) or
www.edifierla.com (Spanish/Portuguese) for local
contact information.
FCC Regulatory Compliance
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
ISED Regulatory compliance
This device contains license-exempt transmitters that comply with Innovation,
Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Model: EDF100016
FCC ID: Z9G-EDF124
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
Tel: +852 2522 6989
Fax: +852 2522 1989
www.edifier.com
© 2020 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, the information
contained herein may be subject to change from time to time without prior
notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown in this manual may be slightly different from the
actual product. If any difference is found, the actual product prevails.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>