Club 3D CSV-1566 USB Gen1 Type-C Triple Display Laptop Docking Station Installation Guide
- June 6, 2024
- Club-3D
Table of Contents
Club 3D CSV-1566 USB Gen1 Type-C Triple Display Laptop Docking Station
Thank you for purchasing our CSV-1566 Product.
After unpacking the product, please make sure you have all the items provided
and checked for any damages. In case of any missing/damaged parts please
inform your supplier immediately.
PARTS DESCRIPTION
You should have
- CSV-1566 Docking Station
- PowerSupply 120W
- 1x USB TypeC cable, 1x connection to Host(1m / 3.28ft) M/M
- Quick Install Guide
Please make sure your Host System has the latest drivers updates installed from our website www.Club-3d.com you can find whether you need drivers under the product code : CSV-1566 Downloads on our website.
- Please connect the black USB type C cable and connect it to the connector on the Dock marked “To Host” , connect the other side of that cable to the USB Gen1 Type-C port of your NoteBook/Host system.
- Connect your preferred Display(s) to the designated connector(s) and power on your Display unit(s) , peripherals, ethernet and/or sound devices
- Connect the Power cable from the Power Charger into the designated, DC in, connector on the Dock.
- Now Plug the Power Supply in a wall socket and switch the Dock ON, the Purple indicator should be lit !
Note: The indicator on the Dock is BLUE when in Stand-By mode !
No need to connect your Host system to the Power Charger, our Dock will
Dynamically Charge your Host system up to 80Watts.
You’re ready to start working and enjoy the full benefits of our Dock.
For any Questions please check our forum section on our website www.club-3d.com