Club 3D CSV-1564 GEN1 Triple Display PD Charge Dock Installation Guide
- October 30, 2023
- Club-3D
Table of Contents
Club 3D CSV-1564 GEN1 Triple Display PD Charge Dock
Thank you for purchasing our CSV-1564 / CSV-1564W65 / CSV-1564W100
Product.
After unpacking the product, please make sure you have all the items provided
and checked for any damages. In case of any missing/damaged parts please
inform your supplier immediately
Product Information
The CSV-1564 / CSV-1564W65 / CSV-1564W100 is a docking station that allows you to connect your notebook or host system to multiple displays, peripherals, ethernet, and sound devices. It supports PD 3.0 supported power charger that is variable from 3A to 5A depending on the purchased option. The docking station comes with a black USB Type C cable and a red USB Type C cable for charging.
Product Usage
- After unpacking the product, ensure that all the items provided are present and check for any damages. In case of any missing or damaged parts, inform your supplier immediately.
- Connect the black USB Type C cable clicked onto the Dock and connect the angled connector to the Dock at that side of the Dock. Connect the other side of that cable to the USB Type C port of your Notebook/Host system.
- Connect your preferred Display(s) to the designated connector(s) and power on your Display unit(s), peripherals, ethernet, and/or sound devices.
- Connect the red USB Type C cable in the Power Charger into the USB Type C connector and the other side to the Marked RED USB Type Connector on the Dock.
- Plug the Power Charger into a wall socket and switch the Dock ON. The blue indicator should be lit.
- No need to connect your Host system to the Power Charger as the Dock will Dynamically Charge your Host system.
- The docking station can be used safely at altitude 2000 meters/6562 feet and below.
If you have any further questions or concerns, please check our forum section on our website www.club-3d.com.
Overview
You should have
- A CSV-1564 or a CSV-1564W65 or the CSV-1564W100 Docking Station
- PowerSupply (PD 3.0 supported power charger is variable from 3A to 5A according to your purchased option)
- 2x USB Type C cable: 1x connection to Host 27cm / 0.886ft, 1x RED cable USB type C for charging to PowerSupply 1 m / 3.28 ft
- Quick Install Guide
Please make sure that:
- Your Host System has the latest drivers updates installed
- Your Host System supports DisplayPort Alt Mode
- Follow the QIG installation step
Connection
- Please connect the black USB type C cable clicked onto the Dock and connect, the angled connector, to the Dock at that side of the Dock, connect the other side of that cable to the USB Type C port of your NoteBook/Host system.
- Connect your preferred Display(s) to the designated connector(s) and power on your Display unit(s) , peripherals, ethernet and/or sound devices
- Connect the RED USB Type C cable in the Power Charger into the USB Type C connector and the other side to the Marked“ RED” USB Type Connector on the Dock.
- Now Plug the Power Charger in a wall socket and switch the Dock ON, the BLUE indicator should be lit !
No need to connect your Host system to the Power Charger, our Dock will
Dynamically Charge your Host system. You’re ready to start working and enjoy
the full benefits of our Dock. Warning Safe Usage: Only to be used at altitude
2000 meters/6562 feet and below.
For any Questions please check our forum section on our website www.club-
3d.com.
Disclaimer: While we endeavour to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Products might obtain a certification during their lifetime. This doesn’t change or alter the product specifications and/or performance in any way. Club 3D will provide the updated information on their website www.club-3d.com at her discretion. Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>