Club 3D CSV-1593 USB User Guide
- June 6, 2024
- Club-3D
Table of Contents
Club 3D CSV-1593 USB
INTRODUCTIONS
Thank you for purchasing our CSV-1593 Product.
After unpacking the product, please make sure you have all the items provided
and checked for any damages. In case of any missing/damaged parts please
inform your supplier immediately.
You should have:
- 1x USB 3.2 Gen1 Type-C 8-in-1 hub with 2x HDMI™, 2x USB-A, RJ45, SD/Micro SD card slots and USB Type-C female port
INSTALLATION:
Simply connect the cables/devices as shown below.
FEATURES
Upstream:
- USB 3.2 Gen1 Type-C Male(Connect to host)
- Support DP1.4 Alt mode, with bandwidth max 2 lanes 16.2Gbps
- (8.1Gbps per lane), downward compatible with DP1.2 Alt mode – Support DSC
Note: To get max bandwidth, the host should support DP1.4 Alt mode with DSC format.
Downstream:
-
HDMI™x2
- Support HDMI™ max 4K/60Hz, 4:4:4, 8bit with 18Gbps Band-width
- Support Dual max 4K/30Hz under MST mode Windows™ System
- Support Dual max 4K/60Hz under SST mode Mac™ System
- Support 8/10/12 bit color depth output
- Support output pixel format RGB4:4:4/YCbCr4:4:4/YCbCr4:2:2/YCbCr420
- Support HDCP 2.2&HDCP1.4
Note: When connecting a DP1.4 Alt mode supported host, the max resolution of HDMI™ is 4k/60Hz (dual 4K/30Hz); When connecting a DP1.2 Alt mode supported host, the max resolution of HDMI™ is 4k/30Hz (dual 1080P/60Hz) due to bandwidth limitation.
-
USB3.2 Gen1 Type-A
- 1x USB3.2 Type-A port supports BC 1.2 with max 7.5W(5V/1.5A) downstream charging, 1x USB Type-A share max 8W (5V/1.6A) downstream charging.
- Max 5Gbps bandwidth per USB-A port
-
SD/Micro SD
- Support Secure Digital v3.0 UHS-I (Ultra High Speed) SDR12 (12.5Mbyte/s)/SDR25(25Mbyte/s)/SDR50(50Mbyte/s)/DDR50(50Mbyte/s)/SDR104(104Mbyte/s)
- Allow 2 card slots to work simultaneously
-
RJ45 (Gigabit Ethernet)
- Support 10M/100M/1000M
-
USB 3.2 Gen1 Type-C Female (for PD Charging)
- Support PD Charging 100W (20V/5A)
- Support Fast Role Swap of PD 3.0, the connected device will not get disconnected while plugging in and out PD Adapter
- 15W is dedicated to the functioning of this product, the rest power (max 85W) will be passed to charge for the host
Disclaimer:
While we endeavor to provide the most accurate, up-to-date information available, the content on this document may be out of date or include omissions, inaccuracies or other errors. Therefore Club 3D does not accept any rights claimed on the content of this document. Please refer to a full overview of our Legacy Terms and Conditions on www.club-3d.com. All other brand names are trademarks or registered trademarks and are the property of their respective owners. All content is subject to change without prior notice. Copyright © 2021, Club 3D B.V. www.club-3d.com