Club 3D CSV-3103D USB3.2 Gen1 UHD 4K Docking Station User Manual

: October 30, 2023
: Club-3D

Table of Contents

Club 3D CSV-3103D USB3.2 Gen1 UHD 4K Docking Station
Product Information
Product Usage Instructions
Introduction HDMI™
Product Overview
Package contents
Features
System Requirements
Specification
Installation
Verifying the installation
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Club 3D CSV-3103D USB3.2 Gen1 UHD 4K Docking Station

Product Information

The Club 3D CSV-3103D docking station is a multi-port hub that connects your laptop or computer to multiple devices such as a DVI monitor, USB 3.0 device, Ethernet, headphones, and microphone. It features DisplayPortTM and HDMITM connectors that can be used one at a time, and the lid in front of the two connectors can be slid to uncover the connector you want to use. Please note that when using the DPTM (or HDMITM) and the DVI connector simultaneously, the DPTM (or HDMITM) connector will not be able to reach 4K resolutions. The docking station comes with a CD containing the necessary drivers for installation.

Product Usage Instructions

Check the package contents before installation to ensure that all items are included.
Insert the provided CD into your disc drive and click Run Autorun.exe to start the installation. If AutoPlay does not appear automatically, locate and double-click on the Setup.exe file in the driver folder to launch the setup. Enter the administrator password and then click Yes to start the installation if a User Account Control dialog box appears.
Click I Accept for the next step and be patient with the installation procedure.
Connect the Docking Station to a computer after the driver installation is completed. For connection details, refer to the chapter on Connection.
When the operating system detects the docking station, a reminder message will appear on the system tray.
To configure your monitor’s display mode, screen rotation, screen resolution, and physical arrangement, click on the utility icon in the Windows System Tray. If you cannot find the icon in Windows System Tray, click the arrow icon to bring up the icon list to find it.
Select a preferred option and click it using the mouse.
If you cannot find the driver in the list, the driver may not be properly installed. Please delete the item, unplug the adapter, and repeat the installation steps.
The DP, HDMITM, and DVI monitors can be connected through the Docking Station if monitors are already connected to the PC. Once extra monitors are connected, it can be configured to use either mirror mode, extended mode or be the primary display. The DPTM and HDMITM connectors can only be used one at a time. Slide the lid in front of the two connectors to uncover the connector you want to use and connect it to the monitor.

Introduction HDMI™

The USB 3.0 3 to 2 4K Docking Station is designed for extra connectivity demands. With the docking station, you can extend the connection of a computer to more USB peripherals, Ethernet network, the speaker and the microphone through one single USB cable. With the built-in USB 3.0 ports, the docking station enables you to enjoy the super speed data transmission between USB peripherals. Aside from USB 3.0, this product is compliant with USB 2.0/1.1 specification. You will be able to keep and use your USB 2.0/1.1 devices as usual. In addition, the docking station is equipped with video output. With the DVI, HDMI™ and DP™ ports, you can mirror your primary screen, or extend the Window desktop allowing visibility of more applications at the same time. Enhanced expansion capability plus the stylish appearance, this docking station with video is the most versatile accessory that also complements your home or office space.

Incorporates HDMI™ technology

NOTE: The DP™ and HDMI™ connectors can only be used one at a time. Slide the lid in front of the two connectors to uncover the connector you want to use and connect it to the monitor. For example, to use the HDMI™ connector, slide the lid to the front of the DP™ connector to uncover the HDMI™ connector, and then connect it to the HDMI™ monitor. Please note that when using the DP™ (or HDMI™) and the DVI connector simultaneously, the DP™ (or HDMI™) connector will not be able to reach 4K resolutions.

Product Overview

Package contents

Before installation, check the items in the package. The package should contain the following items:

USB 3.0 3 to 24K Docking Station x1
USB Cable x1
Power Adapter x1
CD(Driver and User’s Manual) x1
QuickInstallationGuidex1

Features

USB3.0downstreamportx3
- Downward compatible with USB 2.0/1.1
- One USB port supports BC 1.2 charging
DisplayPort™
- DP/HDMI™: resolution up to 3840×2160 pixels *
- DVI: resolution up to 2048×1152 pixels
Supportaudio2.1channel.
SupportGigabitEthernet

NOTE: Please note that when using the DP™ (or HDMI™) and the DVI connector simultaneously, the DP™ (or HDMI™) connector will not be able to reach 4K resolutions.

System Requirements

OperatingSystems:
- Microsoft: Windows® 7 SP1 or later/ Windows® 8/ Windows® 8.1 Warning Safe Usage: Only to be used at altitude 2000 meters/6562 feet and below.

Specification

The DP™ and HDMI™ connectors can only be used one at a time. Slide the lid in front of the two connectors to uncover the connector you want to use and connect it to the monitor. Please note that when using the DP™ (or HDMI™) and the DVI connector simultaneously, the DP™ (or HDMI™) connector will not be able to reach 4K resolutions.

Installation

Caution: DO NOT connect the docking station to a computer before installing the provideddriver. Note that the screenshots on this user’s manual may vary slightly from each operatingsystem. Windows® 7/ Windows® 8/ Windows® 8.11.

Insert the provided CD into your disc drive.
Click Run Autorun.exe to start the installation. NOTE: If the AutoPlay does not appear automatically, locate and double-click on the Setup.exe file in the driver folder to launch the setup. Enter the administrator password and then click Yes to start the installation if a User Account Control dialog box appears.
Click I Accept for the next step.
Be patient with the installation procedure.
Connect the Docking Station to a computer after the driver installation is completed. For connection details, refer to the chapter of Connection.
When the operating system detects the docking station, the reminder message will appear on the system tray.

Verifying the installation

To verify the driver of the adapter, follow the step below. 1. Following the path to open the device manager. Windows® 7:
Control Panel\ System and Security\ Systems\

Device manager

Windows® 8/ Windows® 8.1: Settings\ Control Panel\ System and Security\ System\ Device manager
You will find Display Adapter device listed as below.
Actual strings depend on your operating system. The screen shots are from Windows® 8 and might vary slightly for each operating system.
- NOTE: If you cannot find the driver in the list, the driver may not be properly installed. Please delete the item, unplug the adapter and repeat the installation steps.

Display configuration
NOTE: The following screenshots in this section are using Windows® 7 operating system. It may not match your operating system but the definitions of buttons, tabs and menus are the same.
Utility settings
The supplied utility allows configuring the display mode, screen rotation, screen resolution, and physical arrangement of your monitors.

Click utility icon in Windows System Tray.
- NOTE: If you cannot find the icon in Windows System Tray, click arrow icon to bring up icon list to find it.
Select a preferred option, and then click it using mouse.

Description of the settings

Multi-monitor configuration
The DP, HDMI™ and DVI monitors can be connected through the Docking Station if monitors are already connected to the PC. Once extra monitors are connected, it can be configured to use either “mirror mode”, “extended mode” or be the primary display.
NOTE: The DP™ and HDMI™ connectors can only be used one at a time. Slide the lid in front of the two connectors to uncover the connector you want to use and connect it to the monitor. Windows® 7/ Windows® 8/ Windows® 8.1 Position the mouse anywhere on the Windows Desktop, Right-click and select Screen Resolu-tion. Alternatively, click the utility icon in the Windows System Tray, and then select DisplayLink Manager or Video Setup.

Extended mode

Refer to the Windows system configuration section to open the configuration page.
In the Display drop-down menu, select the preferred monitor.
Check the Multiple Displays > Extend these displays on Window® 7/ Window® 8/ Window® 8.1.
Click OK to confirm and close the settings screen.
Once the setting is completed, simply drag and drop the application icons or the opened windows to the add-on monitor. However, some applications may not support to display on the extended desktop.

Cursor disappeared
If the status remains in the extended mode but the adapter is disconnected, the desktop will still be panned to the add-on monitor. The cursor may not be found on the primary monitor in such a case. If it happens, connect the add-on monitor through the adapter again or keep moving the mouse.
Video playback in extended mode
If the video or DVD playback quality is poor or low performance in extended mode, please playback it on the primary monitor instead of the add-on monitor.
Mirror mode

Refer to the Windows system configuration section to open the configuration page.
In the Display drop-down menu, select the preferred monitor.
Check the Multiple Displays > Duplicate these displays on Window® 7/ Window® 8/ Window® 8.1.
Click OK to confirm and close the settings screen.

Switch the primary monitor

Refer to the Windows system configuration section to open the configuration page.
In the Display drop-down menu, select the preferred monitor.
Check the box of Make this my main display on Window® 7, or Set as Main Monitor on Windows® 8/ Windows® 8.1.
- NOTE: For some computers, you may need to disable the main display by unchecking the box of Extend the desktop onto this monitor or Extend my Windows desktop onto this monitor.
Click OK to confirm and close the settings screen. Windows shortcut Press Windows button + P to bring up the menu as below, and then select a desired option. This function is available for Windows® 7 / Windows® 8 / Windows® 8.1.

Supported resolution
Before adjusting the resolution, refer to the table below for the supported resolution. Note that interlaced modes and reduced blanking modes are not supported.

Audio configuration
By default, when the docking station is connected to a computer, the audio configuration may be changed to USB (Multimedia) Audio Device automatically (this setting depends on models). If it does not work, follow the steps below to setup. Windows® 7/ Windows® 8/ Windows® 8.1

Open Control Panel and then select the hardware and sound icon.
Click Sound > Manage audio devices and then select USB Audio Device or Displaylink Audio.
- Open Control Panel and then select the hardware and sound icon.
- Click Sound > Manage audio devices and then select USB Audio Device or Displaylink Audio.

Uninstall the driver

Follow the instructions to find the driver path, and then right-click on DisplayLink Graphics to uninstall the driver. Widnows® 7 Control Panel > Programs > Programs and Features > Uninstall or change the program Widnows® 8/ Widnows® 8.1 Settings > Control Panel > Programs > Uninstall a program
Click Yes to confirm the uninstallation.
Click Yes to restart your computer. You can also disconnect the video connection now.

The appearance of the “installer” may differ from what is shown in this manual. Due to other and / or newer versions released after the publication of this manual.