NITECORE UT27 Ultra Lightweight Dual Beam Fusion Elite Headlamp User Manual

NITECORE UT27 Ultra Lightweight Dual Beam Fusion Elite

Headlamp

Features

• Ultra Lightweight Dual Beam Fusion Elite Headlamp
• Equipped with a spotlight, floodlight, and auxiliary red light with a max output of 520 lumens
• Spotlight uses a CREE XP-G3 S3 LED (3000K) and a TIR optic lens with a max throw of 128m and a
• Powered by a proprietary Li-ion battery pack and compatible with 3 x AAA batteries
• HLB1300 Rechargeable Li-ion Battery Pack (1,300mAh) included with a built-in USB-C charging port
• Glow-in-the-dark battery compartment for easy battery replacement and location
• Highly efficient constant current circuit provides a stable output of up to 13 hours
• Dual switch design for easy access to various light sources, brightness levels, and modes
• Power indicators can indicate the remaining battery power (Patent No. ZL201220057767.4)
• Advanced Power Cut-Off (APC) technology for an ultra-low standby power consumption
• 90° adjustable tilt angle for various lighting needs
• Specially designed lightweight and breathable headband and diffusing stuff sack included
• Made from durable PC materials
• Waterproof and dustproof rating in accordance with IP66
• Impact resistant to 1 meter

Specifications

Dimensions: 55.4mm×42.5mm×32mm (2.18″×1.67″×1.26″) (Bracket Included) Weight: 30.5g (1.08oz) (Bracket Included, Headband and Battery Not Included) 74g (2.61oz) (Bracket, Headband and Battery Included)

Accessories

NITECORE HLB1300 Rechargeable Li-ion Battery Pack (1,300mAh), USB-C Charging Cable, Headband, Diffusing Stuff Sack

Battery Installation

Battery Options

| Type| Nominal Voltage| Compatibility
---|---|---|---
NITECORE HLB1300 Rechargeable Li-ion Battery Pack| –| 3.7V| Y (Recommended)
Primary Alkaline Battery| AAA| 1.5V| Y (Compatible)
Rechargeable Ni-MH Battery| AAA| 1.2V| Y (Compatible)
Rechargeable LFP Battery| 10400| 3.2V| N (Incompatible)
Rechargeable Li-ion Battery| 10400| 3.7V| N (Incompatible)

Technical Data

Lumens

| 400

Lumens

| 100

Lumens

| 200

Lumens

| 55

Lumens

| 16

Lumens

| 16

Lumens

| ─| 6h| 10h| 8h| 13h| 6h| 60h
| 103m| 128m| 65m| 31m| 16m| 18m| ─
| 2,680cd| 4,120cd| 1,060cd| 250cd| 66cd| 85cd| ─
| 1m (Impact Resistance)
| IP66

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using the HLB1300 Li-ion Battery Pack (1,300mAh) under laboratory conditions. The data may vary in real world use due to different battery usage or environmental conditions.

Using 3 x AAA Batteries:

Lumens

| 400

Lumens

| 100

Lumens

| 200

Lumens

| 55

Lumens

| 16 Lumens| 16 Lumens
| ─| 4h| 6h 30min| 5h| 8h| 4h 30min| 45h
| 103m| 128m| 65m| 31m| 16m| 18m| ─
| 2,680cd| 4,120cd| 1,060cd| 250cd| 66cd| 85cd| ─
| 1m (Impact Resistance)
| IP66

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, using 3 x AAA alkaline batteries under laboratory conditions. The data may vary in real-world use due to different battery usage or environmental conditions.

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective/malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if

1.  the product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
2.  the product(s) is/are damaged due to improper use. (e.g. reversed polarity installation)
3.  the product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to [email protected] All images, text, and statements specified herein in this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the right to interpret and amend the content of this document at any time without prior notice.

Battery Charging
The HLB1300 Li-ion Battery Pack is equipped with a USB-C charging port. Please charge it before use. Power Connection: Use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices) to the charging port to begin the charging process. The charging time is approx. 1 hour 50 minutes. (Charged via the 5V/1A adapter)
Charging Indication: During the charging process, the red indicator will turn on steadily. When the battery pack is fully charged, the indicator will turn green.

Battery Installation

As illustrated, insert the HLB1300 Li-ion Battery Pack or 3 x AAA batteries according to the polarity labels and click to close the battery compartment.
Warnings:

1. CAUTION! Possible dangerous radiation! Don’t look into the light! May be dangerous for your eyes.
2. When the power level is low, please stop using the product and replace or recharge the battery to prevent damage to the battery.
3. When the product is kept in a backpack, please activate the Lockout Mode to prevent accidental activation.
4.  When the product is left unused for a prolonged time, please remove all batteries to prevent battery

Floodlight
On: When the light is off, long-press the W Button to access FLOODLIGHT LOW.
Brightness Levels: When the floodlight is on, short press the W Button to switch between FLOODLIGHT LOW and FLOODLIGHT HIGH.
Off: When the floodlight is on, long press either button to turn it off.

Spotlight
On: When the light is off, long-press the T Button to access SPOTLIGHT LOW.
Brightness Levels: When the spotlight is on, short press the T Button to switch between SPOTLIGHT LOW and SPOTLIGHT HIGH.
Off: When the spotlight is on, long press either button to turn it off.

Beam Switching

• When the floodlight is on, short press the T button to switch to the spotlight.
• When the spotlight is on, short press the W Button to switch to the floodlight.

TURBO Activation
When either beam is on, double press either button to access TURBO. Short press either button again to return to the previous status, or it will automatically return to the previous status if there is no operation in 30 seconds.

Auxiliary Red Light
On: When the light is off, double press either button to access the CONSTANT- ON of the red light. Mode Switching: When the red light is on, short press either button to switch between CONSTANT-ON and WARNING FLASHING of the red light.
Off: When the red light is on, long press either button to turn it off.

Lockout / Unlock
Lockout: When the light is on/off, long press both buttons to access the Lockout Mode. The floodlight will flash to indicate access to Lockout Mode. The power indicators will flash to indicate this status when pressing either button in Lockout

Mode.
Unlock: When in Lockout Mode, long press both buttons to unlock it and automatically access FLOODLIGHT LOW.
Note: The headlamp will be automatically unlocked when the battery is replaced in Lockout Mode.

Power Indication
When the light is off, short press either button, and the power indicators will flash to indicate the remaining power:

1. Flashing three times indicates that the power is above 50%.
2.  Flashing twice indicates that the power is below 50%.
3.  Flashing once indicates that the power is below 10%.
   Note: The batteries should be replaced when the power indicators flash quickly and the output appears to be dim or the headlamp becomes unresponsive due to low power.

Thermal Protection
The thermal protection mechanism will regulate the output of the UT27 according to the working condition and ambient environment to maintain optimal performance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>