summer infant Slumber Buddies Plush Toys Projector Lamp with Music Star Projector Instruction Manual
- June 6, 2024
- Summer infant
Table of Contents
summer infant Slumber Buddies Plush Toys Projector Lamp with Music Star
Projector
Please read the following instructions and warnings carefully.
IMPORTANT! KEEP FOR FUTURE REFERENCE
Tools required: Phillips head screwdriver (not included).
Requires 3 “M” batteries (included).
Adult assembly required.
For technical support, call
1-401-671-6551 in the U.S.A or
1-905-456-8484 in Canada, or e-mail at
customerservice@summerinfant.com
For use with children from birth and up.
Keep small parts away from children.
Slumber Buddies TM
Thank you for purchasing Slumber Buddies TM from Summer Infant. The buddy
system was designed to help create a tranquil and calming environment for your
little one at night. Using a comforting combination of three colors and your
choice of five lullabies/nature sounds, Slumber Buddies™ easily soothes your
child to sleep.
This cute little character will quickly become your child’s best friend!
WARNING
- NEVER place product in crib.
- Do not leave infant unattended with product.
- Complies with all applicable US government safety regulations and the safety requirements of ASTM F963.
- Exercise care when unpacking and assembling product.
BATTERY WARNING
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Remove batteries when product is stored for long periods of time or when batteries are exhausted.
- Dispose of exhausted batteries properly.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Batteries are to be inserted with the correct polarity.
- The supply terminals are not to be short-circuited.
TO USE
NOTE: Batteries are included for the “Try Me” mode.To activate the normal play mode, move switch to any of the three timer positions.When in “Try Me” mode, each function will automatically shut off after 10 seconds.
Power/Timer Control:
The main on/off/timer switch can be found next to the battery door on the
bottom of the unit.
Open the pocket to locate the switch.
Turn switch to the “Off” position during long periods of inactivity.
ON/OFF/TIMER CONTROL:
1st position:”Try Me” mode
2nd position: Off
3rd position: On/ 15 min auto shut-off
4th position: On/30 min auto shut-off
5th position: On/45 min auto shut-off
Nightlight/Selecting Display Color:
To choose a color for the nightlight star display, press the corresponding button to cycle through each of the four options – red, green, blue and light show (all colors). The display will automatically shut off after the set time has completed.Also, after cycling through each of the colors, press the button once more to turn the display off. The main on/off/timer switch can be found next to the battery door on the bottom of the unit. Open the pocket to locate the switch. Turn switch to the “Off” position during long periods of inactivity.
Lullabies/Nature Sounds:
To choose one of the three Lullabies or two Nature Sounds, press the
corresponding button to begin cycling through the options. Once you make a
decision, the sound will play the selected
amount of time for before shutting off automatically.You can turn off the
Lullabies/Nature Sounds feature manually by cycling through all five options
and then pressing the button once more.
Volume:
Adjust the sound level with the volume button (Low / Medium / High) on each
unit.
TO CHANGE BATTERIES
Step I:
Open pocket on bottom of unit.
Step 2:
Use a Phillips head screwdriver to loosen battery door screw. Open battery
door. Remove old batteries and dispose of them safely.
Step 3:
Insert 3 new “AA” batteries, making sure that the”+ and _” are facing the
correct way.
The battery compartment is marked for clarity.
Step 4:
Screw battery door back onto unit. Make sure the On/Off Switch is in one of
the three “On/ Timer” positions and secure pocket.
RADIO AND TELEVISION INTERFERENCE
Changes and Modifications not expressly approved by Summer Infant (USA), Inc.
can void your authority to operate this equipment under Federal Communications
Commissions rules.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(I) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
- Consult the dealer or an experienced radio technician for help.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAN ICES3 (B) /NMB-3 (B).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>