Singke SKX100 ENC Noisere Duction Bone Conduction Headset User Manual

Table of Contents

Singke SKX100 ENC Noisere Duction Bone Conduction Headset User Manual

Parts Description

Headphone

Charging Cable

Earplugs

Include:

long press the volume+ button for 3s turn on your headset, until says “”Pairing”” and the LED indicator flashes red and blue (this means have entered pairing mode)
Open the Bluetooth set on your device, then search the BT devices, and select”X100″, If the pairing fails, repeat the above operation.
The led indicator flash blue, say “connected”, when successfully paired.

NOTE:

When the connection distance between the headset and the Bluetooth device is more than 10 meters or 33 feet,the headset will disconnected from the BT device. Within 5 minutes thereafterlif they are in the range of 33 feet, they will automatically reconnect. If the headset is not connected
back within 5 minutes, it will automatically shut down. Headset support reconnect with last BT device when they are both in pairing mode.

Use the included magnetic induction cable to charge the headset; The LED indicator will change from red to blue when charging is complete.

Please fully charge your headset before the first time use.
Please do not use the headset during the charging
To extend the battery life, if the headset is not used for a long time, it is recommended to charge the headset once a month.

Statuses	Meaning
Solid red	Charging
Solid blue	Charging completed
Flash red and blue	Pairing mode
Flash red	Low Battery
Flash slowly in blue	Incoming call / On call /Playing music

Function	Action	Voice prompt
Power ON	Press and hold volume+ for 3s	Power on
Power OFF	Press and hold volume+for 5s	Power off
Adjust volume	Single-click volume+or volume- button
Previous song	Double-click volume- button
Next song	Double-click volume+ button
Answer/End call	Single-click multifunctionbutton
Reject call	Press and hold multifunction button for 2S
Play/Pause	Single-click multifunction button
SD card mode/Bluetooth mode switching	Triple-click multifunction	button SD

Bluetooth mode: The headset can be connected to PC or cell phone through Bluetooth.
SD card mode: The headset is in the SD player mode. The SD card store files up to 8Gbs.Only the songs in the SD card will be played and the supported file formats are MP3/WMA/WAV (songs without copyright is not supported).
PC mode: This mode is for downloading songs to the SD card.
Only the data cable in the accessories can be used for this function.

Fault	Reason	Solution
Power on failure	Battery low	Try lo charge the headset
Failed to automatically	Standby mode	Press and hold volume+ for 3s
Failed to discover Bluetooth headset	The headset is not in pairing mode

Press and hold volume+ for 3s
Can’t enter computer mode| Headphones do riot turn on| Turn on the headset and connect it to the computer

Headset should be kept in cool and dry place, with a temperature from 0°C to 45°C;Working in an extremely cold, extremely hot, or high humidity environment may limit the working time and shorten the battery life of the headset.
Please charge the headset when it has not been in use for an extended period of time.
Listening at a high volume may damage your hearing and distort the audio quality.
Please only clean headset with a soft dry cloth.
Please do not charge headset immediately after exercising in order to prevent damage to the headset circuitry that can be caused by liquid residue exposure.
Keeping the charging port dry will reduce the possibility of damaging the headset.

The headset has a one-year limited warranty as from the purchase date. No fault or damage caused by human factors or force majeure shall be covered by the warranty.
Disassembling or modifying the headset without permission shall void the warranty.