HCSTCOM HC8005M-DC Commercial Grade Series Unmanaged PoE Switch User Manual
- June 5, 2024
- HCSTCOM
Table of Contents
HCSTCOM HC8005M-DC Commercial Grade Series Unmanaged PoE Switch
Attach warranty card
Thank you for choosing our products.
Please read this user manual carefully, and keep it for future reference.
Product Introduction
Commercial grade series of unmanaged PoE switches, PoE power supply complies
with IEEE 802.3af / at standard. This series has more than ten products to
choose from, it provides 100/1 000M PoE(ethernet) Port or 1 000M Optical Port,
1 0g optical port, and 1 U rack or wall-mounted installation can meet the
requirements of different application sites.
Design of DIP switching can realize Port isolation, Link extension, Qos
priority and PoE watchdog function.The product hardware adopts fanless, low
power consumption, wide temperature and wide voltage design.
It has passed rigorous testing in accordance with industry standards and can adapt to most on-site environments that require EMC. It is mainly positioned at the access or aggregation layer of user networks such as industrial parks, buildings, factories and mines, government agencies, and residential broadband . And widely used in small and medium-sized enterprises, internet cafes, hotels, schools and other Ethernet access scenarios.
Packaging List
PoE Switch 1 Pc
AC Power Cord 1 Pc
User Manual 1 Pc
Warra~ty Card, Certification 1 Pc
Brackets (or 1 u Rack) 1 Pair
Main Features
- Support powering PoE devices through cat 5/6 ethernet cables
- PoE port support IEEE802.3af or IEEE802.3at adaptive
- 10/100M or10/100/100M rate adaptive
- Flow control: Full-duplex adopts IEEE 802.3x standard, half-duplex adopts back pressure standard
- Support Auto MDI/MDIX
- All PoE ports maximum 15.4W ( IEEE802.3af ) or 30W (IEEE802.3at)
- All ports support wire-speed forwarding, it can be reached in the range of 64 to 1536 frames
- One-button smart DIP switching, support VLAN, Default, Extend three working modes
- Support port Qos priority ( depending on the actual model)
- Al version with PoE watchdog function. When PoE starts, it will detect the status of the powered device in real time, and if there is an abnormality on it, the the switch will actively reset the problem port and restore power supply
Performance Indicators
DIP definition and Indicator identifying
| DIP | Mode | Function description |
|---|---|---|
| VALN | Port Isolation | Downlink designated ports are isolated from each other, |
only transmit data with the uplink port(the Al version
automatically enable the PoE Watchdog.)
Default| Standard Switching| All ports communicate freely
Extend| Link extension| The _specified port speed drops to 10Mbps/s, max PoE
transmission is 250 meters(the Al version automatically enable the PoE
Watchdog.)
Indicator| Definition| Status| Description
---|---|---|---
PWR| Power LED| Lighting| Powered
Light off| No power
SW
Mode
| ****
DIP LED
| Lighting| Port Isolated
Light off| Standard switching
Flashing| Link extended
PoE| Power
supply LED
| Lighting| PoE
Light off| PoE failed
Link ACT
1000M
| ****
Link LED
Link
| Lighting| Link connected
Light off| Link disconnected
Flashing| Link data transmitted
100M| Capacity| Lighting| Current rate
Light off| Non-current rate
Application
The downlink is a PoE port, which can directly connect PoE wireless as, PoE
cameras and other devices; VLAN function can effectively isolate network
storms, network IP conflicts, etc.; Extend function can extend the link
distance between PoE and powered devices, reducing the difficulty of
construction.
