EUREKA FORBES Aquaguard Essence RO+Auto UV Ayur Water Purifier User Manual
- June 6, 2024
- EUREKA FORBES
Table of Contents
work in progress
Aquaguard Essence RO+Auto UV Ayur Water Purifier
Copper has antimicrobial, antioxidant, and anti-inflammatory properties that help to support healthy metabolism. It also helps to provide the body with energy and is much needed for growth and development. The activated carbon removes organic components and polishes the water, giving it a sparkling look, making it pure and great to taste.
Patent No. 332771.
5
#
3. If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is
#
more than 300 ppm (mg/L), use of a Membrane life enhancer is recommended.
4
Available at an extra cost.
Membrane life enhancer is recommended to be installed if the TDS is above 1000 ppm or hardness above 300 ppm
Membrane Life Enhancer***
Anti-Scalant Media
Polypropylene Roving Wound Cartridge
Copper has antimicrobial, antioxidant, and anti-inflammatory properties that help to support healthy metabolism. It also helps to provide the body with energy and is much needed for growth and development. The activated carbon removes organic components and polishes the water, giving it a sparkling look, making it pure and great to taste.
***Not a part of the product, Membrane life enhancer is recommended. If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than 300 ppm (mg/L). Available at extra cost.
x
+x
OFF, automatically.
anti-clockwise anti-clockwise
W
KG
i
B
##
wP
Up to 2,000 PPM++
- ++- If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than 300 ppm (mg/L),
use of a Membrane life enhancer is recommended.
Disclaimer for ++ (As per SHMP Elimination)
Your Aquaguard® is equipped with a unique pump having both suction and boosting
capabilities with specially designed ZPP and DRS (Dry Run Sensor) Claims.
Now, this enables your Aquaguard® to work in the following operating conditions:-
B
· Normal Input Water Pressure up to 3 bar (max.)
· Low Water Pressure from Loft Tank
· Zero Water Pressure
· Suction Mode – Maximum 1m below product level
Product Functioning with ‘Normal/Low & Zero Pressure’:
· Ensure that the water flow from the tap into the product is always more than 1.5 LPM.
· In case there is no incoming water supply, the DRS detects unavailability of water and stop the unit
from working to prevent dry running.
· As and when the water supply resumes, the DRS detects the availability of water and restarts the
product. Meanwhile, the intelligent mechanism in your Aquaguard will keep on checking the
availability of water at regular defined intervals and make the product work as and when water
supply resumes.
Note: In case you notice that water in the supply line resumes and product is in stand-by mode, then
please restart the product by switching OFF and ON the power supply.
Product Functioning with ‘Suction Capability’:
· Whenever the water in the container/ bucket gets over and bucket gets empty, the DRS detects non
water availability and stops the product from functioning. Note: When the water is refilled in the
container/ bucket, the product should be restarted by switching Off and On the power supply.
· Prolonged use in loft tank mode/suction mode can impact the working of pump, performance of
product and life of filters. If the performance is not meeting the expectation of the consumer due
to low pressure, then use of a booster pump is recommended.
· Do not re-circulate/reuse the rejected water (discharged by the product) back into the product.
· The booster pump in your Aquaguard® also has the capability of suction of water from a 1 m
distance below the level of product i.e. it can pull water from a bucket/container.
Note: It is not suitable for suction of water from underground storage tank, sump, open well etc. where
the water level is beyond 3 feet below the level of product.
optimised
WARRANTY TERMS & CONDITIONS
1. The Products are warranted against manufacturing defects for a period of
twelve (12) months from the date of original purchase.
2. The Customer will notify the Company in writing promptly of any defects
noticed and give the Company or its authorised agent adequate opportunity to
inspect test and remedy them for which the Customer will deposit the goods at
its own expense, if so, required by the Company with the Company’s
Office/Service Centre along with the original invoice in the city where they
are sold.
3. The Inspection and Test Report of the company’s office/service centre will
be final and binding under the warranty for determining defects,
repairs/alterations required or carried out or certifying work of the goods
thereafter.
®
4. Aquaguard may require initial setting, post-installation, depending on
varying water conditions and power supply. In case of any service requirement,
post-installation, please contact the company’s service centre.
5. The company or its authorised agent will be entitled to retain any
defective part replaced under the warranty.
6. Notwithstanding anything to the contrary contained or implied by this
warranty:
a) The company’s liability under this warranty shall be limited to the first
sale of the goods by the company to the customer and will not apply or extend
to any secondary sale of goods by the customer.
b) The company’s liability under this warranty shall be limited only to
defects in the goods which occur under the conditions of normal operation of
the goods and their proper and prescribed use. The warranty does not cover or
extend to defects which are determined by the company or its authorised agents
as occurring or resulting from or attributable to negligence, abuse, misuse,
faulty care, operation or maintenance or repairs, alterations to the goods or
any part thereof by others or the use of the goods on electrical supply for
which they are not designed, or damage caused by lightening or other
electrical disturbances or interruptions, dismantling or re-installation at a
different location.
c) The company’s liability under this warranty shall remain valid only if the
goods are duly installed by the company or its authorised agency at the
location specified in the invoice and such installation is undertaken by the
company or its authorised agent or franchise.
d) Consumable items mentioned in the consumables table are subject to normal
wear and tear are not covered by this warranty. Please refer model specific
components given in the user manual under the table consumable cartridges’. e) Reverse Osmosis Membrane warranty is for a period of 1 year (or) 6,000 litres (whichever is earlier) from the date of installation, on the condition that the input water is as per the standard test conditions for RO variants (provided in the section
Technical specifications table’), mentioned in the
user manual. If the RO membrane gets clogged within warranty period, it will
be cleaned/repaired/replaced free of charge as deemed fit by the company
authorised service person/centre after inspection. (At applicable for RO
models only.)
f) The customer will have no claim against the company, its employees and its
authorised agents or franchise’s under or pursuant to this warranty in respect
of death or injury to the customer or any other person or loss or damage to
any property caused by or due to equipment failure, breakdown or accident,
fire or operation or utilisation of the goods otherwise than in accordance
with the user manual or by due to any other cause or circumstances beyond the
control of the company.
g) The company’s liability, under this warranty, shall in no event and under
no circumstances exceed the price paid by the customer to the company for the
goods stated in the invoice.
General
For the purpose of this warranty, the following expressions shall have the following meanings respectively:
1. The ‘Goods’ shall mean the goods described in the Order Form.
2. The ‘Customer’ shall mean the original purchaser of goods from the company.
3. The ‘Company’ shall mean EUREKA FORBES LIMITED.
®
®
®
®
4. Aquaguard means and includes Aquaguard , Aquaguard Select and Sure from Aquaguard .
5. ‘General Terms & Conditions’ shall mean the terms and conditions agreed upon by the customer and the company printed on the Order Form.
6. ‘Invoice’ shall mean the invoice issued by the company to the customer describing the goods and indicating, inter alia, the total purchase price thereof and name of the customer.
7. ‘User Manual’ shall mean the instructions for Installation, use and maintenance provided through QR code along with Product supplied by the company.
WARRANTY TERMS & CONDITIONS
8. EFL reserves the right, in its absolute discretion, to change, alter or
discontinue and alter the terms and conditions from time to time without any
prior notice.
9. Any disputes are subject to Mumbai Jurisdiction only. Post-warranty 1. The
customer may be offered a yearly Service Contract at the prevailing company
rates and terms. 2. In case the customer does not wish to enter the Service
Contract, he/she has the option of calling the company’s service centre having
his Aquaguard®
services on an actual basis, i.e., by paying the labour cost and spares needed
to attend to that service/complaint call at the prevailing company rates. Such
service will be rendered by the company in towns/places where the company has
its service centres. 3. If during such servicing it is necessary for the
company to replace or repair defective components or parts, the customer shall
be required to pay for the same as per the company’s prevailing price list. 4.
Eureka Forbes limited reserves the right to offer annual maintenance
contract/ensure availability of spares only up to 7 years from the date of
invoice.
*Conditions apply.
AGUM_Col_V1
disposing
old logo and
new logo are both original Aquaguard products from the house of Eureka Forbes Limited.
R00-0122