niko 124-61105 finishing Set for Switch User Manual
- June 9, 2024
- niko
Table of Contents
niko 124-61105 finishing Set for Switch
Finishing set for single switch or push button, dark brown
124-61105
This finishing set is used in the installation of a single-pole, double-pole,
two-way or intermediate switch or for a push button. It is suitable for a
switch or push button used to control one light point.
Finishing color: dark brown.
Technical data
Finishing set for single switch or push button, dark brown. This central plate
is surrounded with a flat edge that is equipped at all 4 corners with a
rectangular opening, each containing a multi-positional snap hook.
The construction of the central plate ensures that the faceplate can always be
attached flat to the wall, even in cases of untidy plasterwork. This works in
two directions: If the flush-mounting box sticks out of the plasterwork, the
multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the
flush-mounting
box is sunk too deeply in the plasterwork, the snap hooks can compensate for
up to a 1.8 mm margin. The flat edge around the central plate also has 4 round
openings that ensure the correct positioning of the faceplate in relation to
the central plate. After mounting all components (faceplate, finishing set and
switch), no metal parts are visible thanks to the flat edge of the central
plate.
- Function: The key and the intermediate plate (board) form one unit.
- Number of control buttons: 1 control button
- Material central plate: The central plate is enameled and made of rigid PC and ASA.
- Color: enameled dark brown
- Dismantling: For dismounting the central plate, the flat edge is equipped with two notches indicated by a screwdriver symbol. The central plate can easily be dismounted using a slotted screwdriver.
- Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
- Fire safety
- The plastic parts of the central plate are self-extinguishing (comply with a filament test of 650°C)
- The plastic parts of the central plate are halogen-free.
- Dimensions of finishing with flat edge: 56 x 56 mm (HxW)
- Dimensions of visible area of finishing: 45 x 45 mm (HxW)
- Dimensions (HxWxD): 55.8 x 55.8 x 10.5 mm
- Marking: CE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>