HOLMAN DLWW18K 18mm Warm White Deck Lights User Guide

HOLMAN DLWW18K 18mm Warm White Deck Lights

Overview

Introduction
Thank you for purchasing Holman 18mm Warm White Deck Lights. Our system is completely DIY and designed to help illuminate and add ambience to your outdoor space. These can also be used to brighten wooden steps or add light around the edge of your decking.
This instruction manual contains useful information on the proper use and care of this product. Please read through all instructions before attempting assembly. Keep this user guide handy for future use.

Package Contents

1. 9× 18mm DAISY-CHAIN deck lights
2. 1× 18mm END deck light
3. 1× 2-Pin Connection Tee

Setup

Choosing your controller

Holman have a range of lighting controllers to suit all users. Choose the correct Warm White Lighting Controller that suits your requirements.

Warm White Wi-Fi Garden Light Controller Our latest Lighting Controller features Wi-Fi connectivity, allowing access to your Garden Lights from anywhere in the world. Smart automations and custom scene options allow you to light up your garden, however you want.

Warm White Bluetooth® Garden Light Controller. Our Garden Light Controller gives you custom scenes and full brightness control with a Bluetooth® connection and the iGardener™ app. Connect up to 4 controllers to one device

Warm White Garden Light Transformer Power up to 60W of Warm White lights in your garden. This Garden Light Transformer Hub does not require a smartphone to operate and is limited to turning your lights on and off.

Mounting your controller

Before beginning installation of your Deck Lights, you will need to install your Lighting Controller to determine your starting point.
For ease of use, eye level placement is recommended. Ideally, your controller location should not be exposed to rain or areas prone to flooding or heavy water.

• Install the Lighting Controller [a] near a 240V AC power point ideally located in a house, garage, or exterior electrical cubicle
• All Holman controllers have a 60w capacity. Lighting set-ups that include more that 60w of garden lights will require additional controllers

Installation

Main Lighting Cable (Extension Cable)

Once the Lighting Controller is mounted, you can connect your main lighting cable. This cable is where you will ‘branch’ off your Deck Lights or other Holman lighting products.

1. Connect your first Extension Cable [a] to the Lighting Controller [b]
2. Secure the Extension Cable by hand tightening the weather proof end cap [c] on the end of the cable
   • Extension Cables are available in 1m, 2m, 5m and 10m. Choose the correct length to reach from your Lighting Controller to your first lot of Deck Lights

Connection Tee

Each pack of Deck Lights comes with a Connection Tee. This is what connects your Deck Lights to the main lighting cable.

1. Join one end of the Connection Tee [a] to the Extension Cable [b]
2. Secure the Connection Tee by hand tightening the weather proof end cap [c]
3. Connection Tees come with one mini cable end [d], this end connects to your lighting product

• Do not use more than one (1) pack of Deck Lights per Connection Tee. Doing so may result in wattage loss
• If you are connecting more than one pack of Deck Lights, refer to the connection diagram on page 12 and 13

Deck Light Spacing

Deck Lights come with 1800mm of space between each light when connected. Before installation, we suggest marking your decking exactly where you want to install your lights to ensure the spacing is correct. *Drawing represents a 6 pack of deck lights only

Drilling Holes

Deck panels will need to be removed to hide lighting cables underneath. For safety, we also recommend removing deck panels to ensure no other cabling is behind. Refer to our sizing chart below to determine the correct spade drill bit size

1. Remove the deck panels that you will be drilling into
2. Drill the required holes into your deck that were marked previously [a]

Inserting Deck Lights

1. Insert both cable ends of one of your Daisy-Chain Deck Lights [a] through the first drill hole
2. Push the Deck Light into your drill hole [b] until it is flush with your decking. The metal arms will secure against the back of your deck
3. Connect this Deck Light to your Connection Tee [c] with the mini cable end
4. Insert the rest of your Daisy-Chain Deck Lights into your deck using steps 1 and 2
5. Insert the End Deck Light into the 10th drilled hole and connect to the last Daisy-Chain Deck Light
6. Connect the cabling of all Deck Lights together

• Refer to the opposing drawing for correct installation
• Refer to the steps on page 12 to 13 for installing multiple packs of Deck Lights

Deck Lights Connection Drawing

1. Garden Light Controller
2. Extension Cable
3. Connection Tee
4. Daisy-Chain Deck Lights
5. End Deck Light

Need Help? Just Ask
The Holman website has a host of additional information on features. Head to support.holmanindustries.com.au for more tips, tricks and support content.
If you still need help, feel free to email our friendly Customer Service team at support@holmanindustries.com.au or call at 08 9416 9999.

Inserting Multiple Deck Light Packs

1. Attach your second Extension Cable [a] to the free end of your first Connection Tee [b]
   • If you are continuing your row of Deck Lights from earlier, ensure that this Extension Cable is long enough to reach from your first Connection Tee, to your next empty deck light space
2. Join the Connection Tee [c] from your second pack of Deck Lights to your second Extension Cable
3. Install your second set of Daisy-Chain Deck Lights [d] and End Deck Light [e] as per the previous steps on page 10
4. If you are ending your lighting system here, ensure to attach the weatherproof end cap [f] onto the end of your Connection Tee
   • To expand your lighting system further, join additional Extension Cables, Expansion Tees or Connection Tees to your second Connection Tee

Specifications

18mm Warm White Deck Lights

• Input 12 V
• Light Output 0.4w per light
• Pack Output 4w total
• Size ø18mm
• Height 25mm
• Drill Bit Size 14mm
• Brightness 7 lm
• Beam Reach 1m max
• Colour Temperature ~3000k
• Beam Angle 120º
• Lifespan 50,000 hrs
• Waterproof Rating IP67
• Connection 2-Pin Plug + Socket
• Housing Stainless steel and polycarbonate
• Deck   Light Cable Length 1800mm
• Deck Light Cable Diameter 10mm
• Leader Cable Length 900mm

Warranty

2 Year Replacement Guarantee
Holman Industries offers a 2 year replacement guarantee with this product.
In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
As well as your statutory rights referred to above and any other rights and remedies you have under any other laws relating to your Holman product, we also provide you with a Holman guarantee.
Holman Industries guarantees this product against defects caused by faulty workmanship and materials for 2 years domestic use from the date of purchase. During this guarantee period Holman Industries will replace any defective product. Packaging and instructions may not be replaced unless faulty.
In the event of a product being replaced during the guarantee period, the guarantee on the replacement product will expire 2 years from the purchase date of the original product, not 2 years from the date of replacement.
To the extent permitted by law, this Holman Replacement Guarantee excludes liability for consequential loss or any other loss or damage caused to property of persons arising from any cause whatsoever. It also excludes defects caused by the product not being used in accordance with instructions, accidental damage, misuse, or being tampered with by unauthorised persons, excludes normal wear and tear and does not cover the cost of claiming under the warranty or transporting the goods to and from the place of purchase.
Should you suspect your product may be defective and need some clarification or advice please contact us directly:
1300 716 188
support@holmanindustries.com.au
11 Walters Drive,
Osborne Park 6017 WA
If you are certain your product is defective and is covered by the terms of this warranty, you will need to present your defective product and your purchase receipt as proof of purchase to the place you purchased it from, where the retailer will replace the product for you on our behalf.

References

• Holman Industries - Irrigation, Garden Lights, Plumbing
• Product Registration and Extended Warranty - Holman Industries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>