Amica EGSPV 587 920 Fully Integrated Dishwasher User Guide
- June 6, 2024
- Amica
Table of Contents
Amica EGSPV 587 920 Fully Integrated Dishwasher
OVERVIEW
Turn on the appliance
Open the dishwasher door, press the on/off button. Power indicator will be on
Dispense detergent
- Press the latch to open the detergent dispenser.
- Add detergent to the dispenser.
Check the special salt level
Add special salt to the dispenser when the corresponding indicator on the control panel comes on.
Load the dishes
- Remove food leftovers from the dishes
- Place the dishes in the baskets according to loading guidelines.
- It is recommended to load the lower basket first, then the upper basket.
Select the wash programme
- Open the door, press the Power button
- Choose a program, the response light will turn on.
- Then close the door, the dishwasher will start its cycle.
Start your dishwasher
- Open the dishwasher door.
- The dishwasher will start a wash programme.
Turn off the appliance
Turn the appliance off using the On/Off button.
Remove dishes from the appliance
When the dishwasher is off, open the door and wait about 15 minutes before removing the dishes. This will also facilitate the drying process. Hot dishes are more susceptible to cracking.
Features and components
- Spray arms
- Cutlery basket
- Upper basket
- Inner tube
- Lower basket
- Salt container
- Detergent dispenser
- Mugs and cups shelves Main filter
- Water supply hose connection Water drain hose
- Regulator
TABLE OF WASH PROGRAMMES: EGSPV 587 920
NOTE: Figures are for illustrative purposes only Individual models may
vary.
Standard programme This is a reference program for research institutes. Tests according to EN 60436. This programme is suitable for washing normally soiled tableware. This is the most effective pro-gramme taking into account the total energy and water consumption for this kind of tableware. Programme duration, energy and water consumption value given in the table have been deter-mined under laboratory conditions. Actual values can vary.