SilverStone FARA H1M PRO Micro-ATX Chassis with Significant Features for Gaming PC Builds Instruction Manual

SilverStone FARA H1M PRO Micro-ATX Chassis with Significant Features for

Gaming PC Builds

Accessory Content

Motherboard support

Mounting for PSU

motherboard

Bunch wiretaps for cable management

Installation Guide

Remove side panels

Install I/O shield

Remove expansion slot retention bracket

Remove PCI slot cover

Install motherboard

Install graphics card

Install PSU

Remove hard drive cage

Install hard drives, two different options

Install hard drive cage

Install 2.5″ hard drives

Remove front panel

Remove dust filter

Install fans

Install dust filter

Install front panel

Install side panels

Component restrictions

Power supply limitation Supports ATX PSUs with depths of up to 160mm

Graphics card length limitation Install according to the fan and radiator Support up to 320mm length graphics card

Cooler height limit is 160mm, cooler is allowed to protrude the edge of the motherboard by 28mm

Warranty terms & conditions

1. Product component defects or damages resulting from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
2. Usage in accordance with instructions provided in the manual, with no misuse, overuse, or other inappropriate actions*.
3. Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
4. Product is not modified or components replaced resulting in out-of-spec. operation.
5. Loss or damages resulting from conditions other than the ones listed above are not covered under warranty.
6. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of the product.
7. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
8. The warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second-hand purchaser
9. You must provide sales receipt or invoice with clear indication of the purchase date to determine warranty eligibility.
10. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com.

Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com. for the latest updates.
Additional info & contacts
For North America support(at)silverstonetek.com
SilverStone Technology in North America may repair or replace the defective product with a refurbished product that is not new but has been functionally tested. Replacement product will be warranted for the remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate the RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions. http://silverstonetek.com/contactus.php
For Australia only support(at)silverstonetek.com
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard international call charges apply)
For Europe support.eu(at)silverstonetek.de
For China support(at)silverstonetek.com.cn
For Japan support_jp(at)silverstonetek.co.jp
For all other regions support(at)silverstonetek.com

References

• 無標題文件
• Support.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>