bathlife KASKAD Shower System Instruction Manual
- June 12, 2024
- bathlife
Table of Contents
bathlife KASKAD Shower System Instruction Manual
-
Before installation, check the following component list carefully.
-
Before installation, flush pipes carefully.
-
For installation, hire a licensed and/or authorised professional.
-
For installation, connect the hot and cold water supply properly.
-
After installation, turn on the water to check leakage in each joint.
Tools Requirement
-
Spirit-level
-
Measure tape
-
Drill
-
Pen
-
Spanner
-
Allen key
-
Screw driver
-
Wall drill bit
Installation Instruction
- Drill
- Seal
- Plug
- Screw
Concrete or other massive material
Wood beams, nogging pieces, or other base tested and approved for mounting,
such as some boards
Dimension
All dimension has error ± 5 mm, the actual installation size should be basic on the actual product.
-
If you have questions, please contact us.
-
If any part is broken, do not use the product before repairing it.
-
When cleaning, do not use bleaching or abrasive chemicals.
-
When cleaning in general, use a soft cloth and gloves.
-
Turn off all valves to stop any water flow during any maintenance.
Removing or inserting cartridge
Perform the steps in the reverse order after inserting a new cartridge.
Cleaning of cartridges
Once removed, soak the cartridge in detergent or white vinegar for 1 hour. After, rinse thoroughly with water. Reinsert according to the removal and reinsertion guide.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>