ACURITE 00887 Digital Thermometer with 10-foot Temperature Sensor Probe and Humidity Instructions
- June 6, 2024
- Acurite
Table of Contents
00887/0089ISBCA Digital Thermometer
Do not return product to retail store. For Technical Assistance and product return information, please call Chaney Instrument Co. direct at 877-221- 1252
LIMITED WARRANTY – INTERNATIONAL
Consumer may have more remedies at law than follows. Chaney Instrument Company
warrants to the owner, this product to be free from defect in material and
workmanship for one year from date of purchase. CHANEY INSTRUMENT SHALL NOT BE
LIABLE FOR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER
ARISING IN CONTRACT OR TORT. Chaney Instrument’s obligation (at its option) is
limited to repair or replace this product. For in-warranty repair, send clock,
accompanied by Guarantee, bearing Dealer’s name and date of purchase, with
$5.00 to cover handling and postage, to:
www.chaneyinstrument.com
Tel: 877-221-1252
Made in China| Chaney Instrument Company
965 Wells Street
Lake Geneva, Wisconsin 53147
---|---
BATTERY INSTALLATION:
Slide the battery door open at the back of the unit and insert one “AAA” size Alkaline battery as indicated.
TEMP./CLOCK DISPLAY:
Press the “TEMP/CLOCK” button to switch between clock and indoor thermometer.
SETTING THE CLOCK:
- Slide the “TIME SET LOCK” switch on the front of the unit to “TIME SET” position.e
- Depress the “HR” button to set the correct hour.e
- Depress the “MIN” button to set the correct minute.e
- Slide the switch back to “LOCK” position.e
°F /0 c DISPLAY
Use the slide switch ( °F /° C) on the back to select between Fahrenheit/Celsius display.
Maximum/Minimum Temperature:
- Press the “TEMP MIN/MAX” button once to display the maximum and minimum indoor recorded temperature.
- Press the “CLEAR” button to reset the recorded indoor temperatures
- Press the “TEMP MIN/MAX” button twice to display the maximum and minimum outdoor recorded temperature.
- Press the “CLEAR” button to reset the recorded outdoor temperaturese
Maximum/Minimum Humidity:
- Press the “HUMIDITY MIN/MAX” button once to display the maximum recorded humidity.
- Press “CLEAR” to reset the recorded maximum humidity.
- Press the “HUMIDITY MIN/MAX” button twice to display the minimum recorded humidity.
- Press “CLEAR” to reset the recorded minimum humidity
BACK-LIGHT:
Press the “LIGHT” button for Illumination. (Note: frequent use of back-light will shorten battery life)
RANGES:
Indoor: -4°F to 122°F ( ·20°C to S0°C)
Outdoor: ·S8°F to 158°F (·S0°C to +70°C)
Humidity: 20% • 90%
OUT OF RANGE:
The thermometer will display a “LO” or “HI” when the temperature or humidity
reach a level out of the ranges stated above.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY:
Follow the polarity(+/·) diagram in the battery compartment. Promptly remove
dead batteries from the device. Dispose of used batteries properly. Only
batteries of the same or equivalent type as recommended are to be used. DO NOT
incinerate used batteries. DO NOT dispose of batteries in fire, as batteri11s
may explode or leak. DO NOT mix old and new batteries or ty_pes of batteries
(alkaline/standard). DO NOT use recharqeable batteries. DO NOT recharge non-
rechargeable batteries. DO NOT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>