Zhuhai Quin Technology M110S Label Maker User Manual
- June 6, 2024
- Zhuhai Quin Technology
Table of Contents
Zhuhai Quin Technology M110S Label Maker
Inside Box
Product Description
Turn On/Off
- Press Power Buttonr!i for 2 seconds to turn on the printer.
- To turn it off. please press the Power Button(!) for2 seconds.
FEED
- Label paper Press Feed Button to feed the tape to the proper place and get ready for printing next tape.
- Continuous paper: Press Feed Button@i to keep paper feeding ) it will stop when you let go of the button.
SYSTEM SETTING
- Press Power Buttonr!) for 1 second to switch to the setting interface.
- Press Feed Button for 1 second, scroll option 11st and select by pressing Power Button.
- Press Power Button t!) for2 seconds to go back to the main page.
Screen Information
LOGO GUIDANCE
When printer connects to Bluetooth, this logo will be light up. This logo will flash when the data is transferring.
- Setting/Transfer: When you are using USB wire, this logo will be shown asf’; If you press Power Button short time, it will be switched to Setting Mode, the logo will be shown as Setting Mode@.
- Cover Opening: It indicates that the paper cover is opened or not closed correctly. A message will appear, stating that the paper c:over is opened.
- Paper Conditiong If the paper roll is not installed correctly, or there is insufficient paper, this logo will light up. A message will appear, slating that there i& no paper. When the paper is detected, it will give you a confirmation so that you are able to proceed.
- Print Condition : It will light up while the printer is printing or feeding.
- External Electricity: It will light up when the printer ifi connected to a power source.
TEXT AREA
Screen setting
Screen hint
Device Parameters
Search Print master on App
Store orGoogle Play to Get the App
Installing the Paper Roll
Product Warranty Description
- We will provide customers with reliable “replacement/return” support during the one-year warranty period from the date of purchase.
- Please keep the warranty card In a safe place so that you can read it when needed.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
Thls device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction,
Warranty/Maintenance Card
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>