Zhuhai Quin Technology T02 Mini Printer User Manual
- June 5, 2024
- Zhuhai Quin Technology
Table of Contents
Product Description
Power indicator status
| Green light is steady| Charging competed
---|---|---
| Flashing green light| Charging
| Red light is steady| Fault: out of paper/overheating
| Flashing red light| Low battery
Battery Warning Description
Never disassemble, impact, squeeze or put into fire:
If there is severe swelling, do not continue to use;
Do not put in a high-temperature environment. Do not use if immersed in water;
Be sure to replace with an appropriate type of battery. (There is danger of
explosion if you replace it with the wrong type of battery.)
Be sure to dispose of the used battery as instructed.
Product Description
Open cover switch
Reset
USB interface
Paper Exit
Power button
Power Indicator
Power indicator status
| Green light is steady| Charging competed
---|---|---
| Flashing green light| Charging
| Red light is steady| Fault: out of paper/overheating
| Flashing red light| Low battery
Battery Warning Description
Never disassemble, impact, squeeze or put into fire:
If there is severe swelling, do not continue to use;
Do not put in a high-temperature environment. Do not use if immersed in water;
Be sure to replace with an appropriate type of battery. (There is danger of
explosion if you
replace it with the wrong type of battery.)
Be sure to dispose of the used battery as instructed.
Operation Guidance
-
Fully charge the battery before using the first time. To turn on the machine, press and hold the power button for 3 seconds.
-
Search for Phomemo and download the App.
-
Turn on Bluetooth, search for the device in the App and connect. Download App Download on the App Store GET IT ON Google Play Search for Phomemo Start printing via App
Paper Replacement
-
Replace the paper by pushing the switch on the printer to open the cover.
-
Take out the adjustable plate. Open the adjustable plate slightly, install the paper roll in the plate and close it.
-
Place the paper roll into the printer and straightened the paper as shown in the picture above.
Attention
- Insert or pull out the charge cable gently to avoid any damages to the port.
- Pull out the cable after charging is complete.
- Do not change or use the printer in high temperature, high humidity, or foggy circumstances (e.g. In a bathroom, a stream room, or beside a fire)which may be dangerous. (NOTE:This machine si not suitable for tropical environments)
- Improper charging methods may cause damages to the print head.
- Do not touch the print head in case of high temperature.
- Be aware of the sharp blade.
- If the operation of the printer fails, the printer can be reset by gently inserting the reset hole.
Phomemo official consumables types
Plain paper: with image retention up to 7 or 10 years.
Color paper: include yellow, pink, and blue paper…with image retention up
to 5 years.
Sticker Paper: with sticky glue, with image retention up to 10 years.
Sticky Note : with back glue, can be pasted and taken off at any time.
Continuous label paper: With sticky glue, with no fixed size, can freely set
the pringting length.
The paperoll is the special paper for the Phomemo.
The guarantee policies can not be enjoyed if the Phomemo failure is produced because the paperoll is not used.
Product Warranty Description
Thank you for choosing Phomemo.
- The free warranty period is 1 year from the date of purchase.
- Within 30 days from the date of user’s receipt, the user can choose to return. Please save the warranty/maintenance card properly. The warranty/maintenance card will not be replaced if lost.
Non-warranty regulations
The warranty is void under the following conditions:
- Exceeding the warranty period.
- Not presenting the original warranty/maintenance card.
- Presenting a damaged warranty/maintenance card(e.g. Tearing tampering), Alering product information.
- Damage caused by unauthorized repair, disassembling, etc.
- Damage caused by human error.
- Damage caused by natural disasters such as earthquakes, floods, windstorms, lightning strikes, or external disasters such as fires and house collapses.
- Failure or damage caused by harsh conditions(oil, dust, moisture, direct sunlight, etc.)or failure to use or care for as required by the instruction manual.
Warranty/Maintenance Card
□ Replace
□ Return
□ Name:
| User info | Name: | I Gender: | I Phone: |
|---|---|---|---|
| Address: | |||
| Product information | Date of purchase: |
Product Order Number:
Product Serial Number:
Return, Replace, or Repair Request| Reasons:
Maintenance records| Fault condition:| Maintenance staff:
Processing situation:| Repair date:
Repair ticket number:| Date of inspection:
Product certification
Inspector:
Date of manufacture:
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>