MIXX Max 100 Wireless Tailgate Party Speaker User Guide
- June 6, 2024
- MIXX
Table of Contents
MIXX Max 100 Wireless Tailgate Party Speaker
LET’S START
What’s in the box?
- Volume / Power on
- Charge status LED
- (illuminates RED when battery is low)
- Micro USB charger port
- Mode / Light button
- Previous track / FM tune up
- Play / Pause / FM Scan
- Skip track / FM tune down
- USB audio port for music playback LED display
- Micro SD card port for music playback Microphone volume
- Microphone echo effect
- 3.5mm AUX input
Microphone input jack
**USB Charging Cable
**
LET’S PLAY
First Time Pairing
Turn on your Bluetooth audio device. Turn on the speaker button until
Bluetooth mode is selected. The speaker will go into pairing mode and the
message BT will flash quickly on the LED display. Select ‘MIXX xBoost MAX’
from the audio device list to pair with the speaker. You will hear ‘Connected’
from the speaker confirming that you are ready to play music!
Note: If your Bluetooth audio device is not able the audio device list to
pair with the speaker. You will hear ‘Connected’ from the speaker confirming
that you are ready to play music! If your Bluetooth audio device is not able
to connect to the speaker, check whether it has already connected to another
device. Disconnect it and enter pairing mode by pressing and holding the Play
/ Pause / FM scan button
Playing music from a USB Memory Stick
Ensure your USB Memory stick is formatted using a computer and your MP3 files
are will start to play. You can control the music playback using the Play /
Pause and the Track buttons &.
**Playing music from a Micro SD card*
Ensure your Micro SD card is formatted using a computer and your MP3 files are
saved to the root folder on the USB stick. Turn on the speaker and insert your
Micro SD card into the Micro SD card port . Ensure your Micro SD card is
around the right way do not force it into the slot – you may need to turn it
over to insert it. The input will automatically switch to TF mode and music
will start to play. You can control the music playback using the Play / Pause
and the Track buttons & .
Note** : if a Micro SD card AND USB stick are both inserted at the same
time then the music on both will be accessed for playback sequentially. USB
Memory Stick and Micro SD card are not included.
Play Pause
Short press the Play / Pause button to play music from a Bluetooth or a
connected storage device (USB stick / Micro SD card). Short press the Play /
Pause button to pause music that is already playing.
Skip Previous
Track Short press the Skip Track button to skip to the next track. Short press
the Previous Track button to skip back to the beginning of the current track
and short press again to skip to the previous track.
FM Radio
Turn on the speaker and press the Mode / Light button until FM mode is
selected. When using the FM radio for the first time in a new location, press
the Play / Pause / FM Scan button to scan for FM radio stations and store them
in memory locations. Use the Track / FM tune buttons & select a radio station
to listen to from those stored during the radio station scan.
Using the Microphone Input
Plug the microphone (not included) directly into the Microphone input jack to
sing your heart out or to Karaoke. Adjust the Microphone volume or use the
Microphone echo effect to boost the sound effects.
Controlling the Lights
Press and hold the Mode / Light button to turn the lights on / off
LET’S GO WIRED
The speaker can be used with devices that have a 3.5mm audio socket. A 3.5mm
audio cable provides the flexibility to convert this speaker from wireless to
wired use. Convenient if there is no Bluetooth connection.
Insert the 3.5mm audio cable (sold separately) into the 3.5mm AUX input and
the other end into your device’s 3.5mm port and select the AUX mode using the
Mode / Light button to start listening to your music.
LET’S STAY CHARGED
When the Charge Status LED illuminates RED it is time to charge your speaker.
Using the USB cable provided, plug the speaker into a 5V USB wall charger. It
is recommended to use a wall charger capable of 2A / 10W power output to
ensure an optimum charging rate.
Important! Do not use a wall charger with a higher output voltage than 5V
as this may cause damage to the speaker.
Once charging has completed the Charge Status LED will turn off.
LET’S VIEW TECHNICAL SPECS
- Playtime on a single charge Up to 3.5 hours
- BluetoothVersion 5.0
- Wireless Range Up to 10m
- Speaker Drivers 2 x 6.5” woofer + 1 x 1” tweeter
- Power Output15W
- Frequency Response 20Hz to 20kHz
- Weight3.5kg
- Dimensions 75mm x 244mm x 204mm
COMPATIBILITY
Suitable for most Bluetooth audio-enabled smartphones, tablets, notebooks, and laptops.
LET’S BE SAFE
It’s important that you read this section completely, especially the ‘Warning, Caution and Safe Usage’ instructions.
For your protection
Ensure the product is correctly connected using the manufacturer’s original
accessories included with the product. Please keep the product out of reach
from children and animals. Do not listen to loud music for a long duration of
time. Adjust the volume to a comfortable level before listening Do not use in
areas where the use of hearing is required for safety. Do not drop, short
circuit, disassemble, expose to intense heat or continue to use this product
if damaged.
We recommend
To refer all servicing to qualified persons. Servicing may be required when
the product has been damaged in any way, does not operate normally, or has
been dropped. The operating temperature range for this product is 5º – 40º
Celsius.
WARNING
The micro USB cable connector is not water resistant and should not be exposed
to rain, moisture, any splashing, or liquid spills. This may cause excessive
heat and may lead to fire damage or personal injury.
CAUTION: This product contains a Lithium battery. Incorrect disposal of
this battery may result in an explosion.
LET’S RECYCLE
This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. Take the product to a collection point designated for the recycling of electronic devices. Find out more about return and collection points through your local authority.
CONTACT US
Feedback is welcome simply email us at support@mixx-io.com or visit mixxaudio.com for more information.
SAFE USAGE INFORMATION
Do not crush, puncture or incinerate the speaker or USB charging cable. Only
use a certified or the device manufacturer’s charging cable.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>