globe GB34358 Wifi LED Lamp Instructions
- June 6, 2024
- globe
Table of Contents
LIMITED WARRANTY:
This bulb is warranted to last 3 years from the date of purchase based on the
use of 3 hours per day. If it fails before that time, we will replace it. Send
Globe Electric the bulb, proof of purchase, and register receipt along with
your complete name and address. See caution text for proper use. This warranty
is void if this product is misused in any way. This replacement is the sole
remedy available and liability for incidental or consequential damage is
expressly excluded.
CAUTION: DO NOT USE WITH A STANDARD DIMMER. Only use the control provided
with or specified by these instructions to control this lamp. This lamp will
not operate properly when connected to a standard (incandescent) dimmer or
dimming control. The bulb can be switched to different operating modes and is
dimmable through the Globe SuiteTM app. For use only in 120V/60HZ circuits.
Risk of electrical shock. Do not open, no user-serviceable parts inside. This
device is not intended for use with emergency exit fixtures or emergency exit
lights, photocells, and electronic timers. This device is intended for indoor
use. Do not use where directly exposed to water. The minimum operating
temperature is -20°C (-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment. This Class B digital apparatus complies
with CAN ICES-005(B).
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate
the receiving antenna. Increase the separation between the equipment and
receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This device should be installed and operated with a
minimum distance of 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. CAN
ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
FCC RESPONSIBLE PARTY PARTIE RESPONSABLE FCC
Globe Electric /
15301 Shoemaker Ave
Norwalk, CA 90650
www.globe-electric.com
Globe Electric Company / 34358* 01-025-21
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>