KuWFi 4G LTE Router with SIM Card Slot User Manual
- June 14, 2024
- KuWFi
Table of Contents
KuWFi 4G LTE Router with SIM Card Slot
Brief Introduction
This product offers a secure internet-sharing service to multiple terminal users. WiFi devices(Smartphones, Tablets, PCs) can get access to the internet through this device, and enjoy 4G/3G/2G high-speed services. The connection process depends on the system of each WiFi device, please follow the prompting messages.
PC get access to internet by 4G/3G/2G.
When connecting the device with a USB cable to get access to the internet,
please follow the prompting messages.
Product Introduction
Appearance (LED)
LED Indicator
Appearance (LCD)
Display screen
WiFi Connection
WiFi account
When terminal users connect to this device for the first time, users need to
find SSID (WiFi name), which is 4G MIFI****(the last 4 digits of the MAC
address), and type in the password(1234567890 as default) (Please refer to the
current device label for details)
Windows 7
- Click Start > Control Panel > Network and Internet > Network and Sharing Center> Connect network
- Choose the right SSID of the device, and click Connect.
- Type in the correct password and connect.
- Wait for a while till it is connected.
Tip: Before connecting to WiFi, please make sure the PC (or other devices) has the wireless network card, as shown on the image, click the wireless network list, if it shows the list, then the wireless network card works, you need to check your wireless network card.
Android Mobile phone
- Setting, click WLAN, switch on WLAN
- Choose the right SSID
- Type in the correct password and connect.
- Wait for a while till it is connected.
Backstage Configuration
Please follow the below steps to log in to the management interface
- Make sure the WiFi between the device and other WiFi devices or PCs are connected normally.
- Open the browser, and type in [http://192.168.199.1] and enter.
- Type in the user username and password, and log in to the management interface, the default username and password are both “admin”
Device Information
Users can find the current detailed information, namely: SIM card No., IMEI,
IMSI, SSID, Max user No., Wi-Fi Performance, LAN name, IP/MAC/ WAN IP address,
Software/Firmware/Hardware version information, data statistics and data
limitation settings.
Statistics
Shows the current upload/download speed, current and monthly connection
duration and total used data.
Data limit settings
Date setting of clearing data, Type of clearing data, and data limitation
monthly.
Ethernet Settings
Choose ethernet connection, auto as default.
Basic Settings
Modify wireless network parameters (SSID,SSID broadcast, max WIFI users No.
etc.)
Account Management
Modify current user name, password
Reset Factory Settings
Reset factory settings, and restart the device.
Configuration list/Warning and notice
- Please don’t start it in a place where it is forbidden or it may cause interference or damages.
- When get close to high-precision instruments, please turn it off, it may effect the performance of the devices(such as the embedded medical equipment)
- Please don’t put the device in a place where an explosion may happen.
- Keep the device dry, keep any liquid from it to avoid any damage
- Don’ throw, or hit the device, it will damage the PCBA and effect the performance.
- Don’ separate it with wet hands, it may cause an electric shock.
- It will get hot which is normal when it is put in a place with a weak signal or high temperature for a long time. It will not influence the usage and the life of it, don’ t touch it with skin for a long time.
- Don’ t store it in a high-temperature environment, it will shorten the life of the device, damage it or cause an explosion.