KuWFi CF5 4G LTE CPE Router User Manual
- June 14, 2024
- KuWFi
Table of Contents
Outdoor CPE
Router User Manual
Brief Introduction
- This product offers secure internet sharing service to multiple terminal users. WiFi devices(Smart phones, Tablets, PCs) can get access to internet through this device, enjoy 4G/3G/2G high speed services. The connection process depends on the system of each WiFi device, please follow the prompting messages.
a. Get access to internet through ethernet cable.![KuWFi CF5 4G LTE CPE Router
- Figure 1](https://manuals.plus/wp-content/uploads/2023/11/KuWFi-CF5-4G-LTE-
CPE-Router-Figure-1.jpg) When getting access to internet through ethernet
cable:
b. Get access to internet through 4G/3G/2G
Get access to internet by inserting SIM card and connecting to device.
Product Introduction
Item | Introduction |
---|---|
WiFi Antenna | for WiFi signal receiving and sending |
4G LTE Antenna | for 4G signal receiving |
Power DC | 12V-1A Connect and power on. |
Micro USB port | for battery charging, firmware updating and outlet |
power supply by USB adapter, powerbank (only for emergency use)
WAN/LAN| for Ethernet cable input(WAN/LAN self-adaption)and POE adapter
SIM Slot| Standard SIM SIot(2FF)
Reset button| Long press for 5s to reset factory settings.
Status Indicator
Indicator status can tel the current device working status.
Power indicator | Blue | On |
---|---|---|
WiFi indicator | WiFi off | WiFi booting |
--- | --- | --- |
Blue | WiFi indicator | |
off | Blue light flash in 2s | Blue light keeps on |
WAN/LAN | Ethernet input | Non-ethernet input |
--- | --- | --- |
Green light | Light on, flashing | Light off |
signal Indicator Green | 1-bar signal(25%) | UghienLight on |
--- | --- | --- |
2-bar signal(50%) | Light on | |
3-bar signal(75%) | Light on | |
4-bar signal(100%) | Light on | |
Network tutus | Ethernet connection | No Ethernet connection |
--- | --- | --- |
green | Light on(flashing) | Light off |
Wifi Connection
- Click Start> Control Panel> Network and Intemet>Network and Sharing Center>Connect network
- Choose the right SSID of the device, and clic k connect.
- Type in the
correct password and connect.4 Wit
for a while til it is connected,
Android Mobile phone
- Setting, click WLAN, switch on WLAN
- Choose the right SSID
- Type in the correct password and connect.
- Wait for a while it it is connected.
Backstage Configuration
Login the WEB management interface
Please follow below steps to log in the management interface.
- Make sure the WiFi between the device and other wifi devices or PC are connected normally. 0pen the browser, and type in (htp://192168.199.1] and enter
- 3.Type in user name and password, log in the management interface, the default user name and password are both “admin®
Device Information
User can find the current detailed information, namely: SIM card No, IMEL IMSL
SSID, Max user No, Wi-Fi Performance, LAN name, IP/MAC/WAN 1P adress,
Software/Fitmware/Hardware version information, data statics and data
limitation settings
Statistics
Shows the current upload/download speed, current and month connection duration
and total used data
Data limit settings
Date setting of clearing data, Type of clearing data, data imitation monthly.
Ethernet Settings
Choose ethernet connection, auto as default,
Basic Settings
Modify wireless network parameters(SSID,SSID broadcast, max WIFI users No.
etc.)
Account Management
Modify current user name, password
Reset Factory Settings
Reset factory settings, restart device.
APN setup
The following is how to set the APN:
You need 1o click on “APN” in “network settings” and then click on “add new” .
Please fill in “Profile Name’, “APN’, “mcc” and “mnc” and click *Apply”.
PIN Management
About the setting method of PIN:
Please open settings “, then click “Device settings and “PIN management’,
please select “disable” in the PIN status® option, and finally click “apply”.
If the “PIN Status” of the router is disabled, you do. not need to perform
this step.
Router Setting
The following is how to change the IP address
You need to click “disconnect” next to the network connection option on the
homepage. Then click *Router Setting” in “setting” and modify it and finally
click “Apply”
Accessory list/Warning and notice
No. | item name | Quantity |
---|---|---|
1 | 4G adapter | 1 |
1 | POE adapter | 1 |
1 | Ethernet cable | 1 |
1 | User manual | 1 |
1 | 4G LTE Antenna | 1 |
1 | Wi Antenna | 1 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>