CANYON CNE-SB01BB Smart Band User Guide
- June 6, 2024
- CANYON
Table of Contents
CANYON CNE-SB01BB Smart Band User Guide
Smart band
- Notifications
- Pedometer
- Heart rate monitor
- Compatibility with iOS and Android OS
Complete set included into the package
- Smartwatch
- Battery (built-in)
- TPU strap
- User manual 1pcs
- USB charger cable
Usage
Make sure that your smartwatch is fully charged before usage.
- Charging: push the watch body out of the wristband, then stick the watch body into its charging kit and connect it to a USB port of your computer, a wall socket adapter or a power bank. Charging progress will be indicated on the screen. For better charging compatibility, it is advisable to use a Power Bank or a charger produced by Canyon.
- Charger requirements: 5V.
- Charging time: 2-5 hours depending on a source of charge.
Disassembling: while holding the wristband with your hand, push the watch body out of the wristband.
Assembling: push the watch body into the wristband.
Turning on: press and hold the round sensor button on the front side of the watch body.
Turning off: Press the round sensor button on the front side of your watch body to activate the screen, then tap it several more times to see “Power Off” icon, then press and hold the button.
Connecting to a smartphone: charge the smartwatch, turn it on, activate bluetooth on your smartphone, download and install Canyon Smart Watch application
Canyon Fit by scanning the QR code below, open Canyon Fit app->press ”Setup”->”Pair device”->” Start”-> choose your watch from pair device list (SB01) -> press ”ADD DEVICE” and you will see Device successfully connected. Use the application to apply needed settings: turn on periodic heart rate measurement, fill in your body parameters, select apps that you want to receive notifications from, etc.
Scan this QR code to download and install the application Сanyon Fit:
Troubleshooting
| Problem | Solution |
|---|---|
| Your smartwatch doesn’t turn on | Make sure that it’s fully charged. |
Then press and hold the round button on the front side of the watch body. If nothing helps, please contact your shop of purchase for warranty support.
Your smartwatch isn’t detected by a smartphone| Make sure that you’ve
activated Bluetooth, GPS, Location Services with high precision, WiFi on your
smartphone
Your smartwatch is detected by a smartphone, but fails to connect| Turn the
smartwatch off and then turn it back on.
If the actions from above-mentioned list do not help, please contact support service at Canyon web-site: http://canyon.eu/ask-your-question/
Safety Instructions
Read and follow all instructions before usage of this device.
-
Protect the device from excessive amount of water: this smartwatch is protected only from small amounts of water such as rain drops or short spills.
It’s forbidden to put it under powerful jets of water, fully immerse it, or to wear it while swimming. -
Protect the device from heat: do not install heating devices near it, and do not expose to direct sunlight during hot season for a long time.
-
Protect the device from smashing: avoid dropping the device from over 0,5m to hard surfaces.
Warning! Do not use in hot water. This can lead to damage to the device!
Warranty liabilities
Warranty period starts from the date of the device’s purchase from the Seller, authorized by Canyon.
The date of purchase is indicated in your sales receipt or a waybill. During warranty period, a repair, replacement or refund of payment for goods are performed on discretion.
Manufacturer: Asbisc Enterprises PLC, 43, Diamond
Court, Kolonakiou Str, 4303, Limassol, Cyprus, Agios
Athanasios, http://canyon.eu/
References
- Canyon | Mobile and Computer Accessories
- Canyon | Мобильные и компьютерные акÑеÑÑуары
- Podpora
- Certificates