artika PDT-1SUB-HD-CR LED Pendant Light Subway Round Instruction Manual
- June 6, 2024
- artika
Table of Contents
artika PDT-1SUB-HD-CR LED Pendant Light Subway Round Instruction Manual
INCLUDED
WHAT YOU WILL NEED…
WARNING: Risk of electrical shock. Turn off breaker at the panel.
Switch off the main electrical supply from the fuse box/circuit breaker before
installing the unit or doing any maintenance.
Do not use outdoor.
CAUTION:
If using a dimmer, it must be LED compatible.
IMPORTANT
The installer and/or user must read, understand and follow these instructions
before installing the product. This product must be properly installed before
it is used. If instructions are not followed, the manufacturer will not be
held responsible for any problems or product malfunction. Failure to follow
installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In
some states or provinces, it is a legal requirement for this type of product
to be installed by a certified electrician, according to the electrical and
building codes effective in the region where the unit is used.
HEIGHT ADJUSTMENT
NOTE: It is recommended to make any major adjustments to the height of the light fixture before installation.
- With the power off, measure the distance from the ceiling to the bottom of where you would like your light fixture to hang.
- To retract the wire, gently push it into the light fixture base (fig. 1).
- To extend the wire, push the metal collar while gently pulling the wire down (fig. 2). When the metal collar is released, the wire will be fixed into position.
- Once the wire is at the desired length, turn the fixture over and slide the plastic wire retainer up to the wire nut, to prevent the pendant from slipping down when in use.
STEP-BY-STEP INSTALLATION
-
Turn off power at the circuit breaker and the light switch. Ensure the power is off before continuing.
-
Install the mounting bracket on the junction box using the junction box screws (fig. 3).
-
Attach the hook to the mounting bracket (fig. 4).
-
Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector. Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector. Connect the ground wire (G) from the light fixture to the ground supply wire (G) from the junction box using a wire connector (fig. 4).
-
Put the wires into the canopy.
-
Mount the canopy onto the mounting bracket and secure it with the canopy screw (fig. 5).
MOUNTING THE GLASS DISC
- 7. Assemble the glass disc to the light fixture. Be sure the frosted pellicular is facing inside. Secure the disc with the components in the order shown below (fig. 6).
8. Screw the threaded rod in the light fixture (fig. 7)
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device does not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARRANTY
Artika For Living Inc. is proud to offer you a three-year (3) limited warranty on manufacturing defects from the date of purchase for residential use only. The warranty is extended to the original owner in USA, Canada, Mexico, UK, Iceland, France and Spain and is non-transferable. It does not apply to retailers, commercial applications or establishments. The original sales receipt is required for all warranty claims. The remedy under this limited warranty shall be product or part replacement at Artika’s discretion as provided herein and cannot exceed the original purchase price. This warranty is valid only on products installed in accordance with the building code and laws effective in the region where the unit is being used, as well as in accordance with the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Product(s) or component part(s) may be required to be returned for inspection and verification. Normal wear and tear, misuse, negligence, vandalism, improper maintenance (surface damage due to chemical interaction or cleaning agents including, but not limited to, scouring pads, use of cleaners containing abrasives, alcohol or other organic solvents) improper handling, accident, abuse, fire, flood, theft, acts of God, neglect, or alteration of the product will not be covered under this limited warranty. It excludes any accessories that accompany the product including, but not limited, to bulbs or batteries. The warranty does not cover handling, labour, transportation, or any other cost associated with the installation or replacement of the product. This limited warranty is valid in the country of purchase and by Artika authorized retailers only. Artika for Living Inc. will not be held responsible for any direct or consequential damages or injuries related to the use of this product arising from improper use or installation of this product. Please visit www.artika.com to discover more about Artika for Living Inc.
Artika For Living Inc.
1756, 50th Avenue Montréal (Lachine), Quebec Canada H8T 2V5
Customer service Monday to Friday 9 a.m. – 5 p.m. EST
1-866-661-9606
support@artika.com
www.artika.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>