KEF Mu7 Noise Cancelling Over-ear Wireless Headphones User Guide
- June 6, 2024
- KEF
Table of Contents
KEF Mu7 Noise Cancelling Over-ear Wireless Headphones
In the Box
Contents vary by region.
Headphones Overview
- Touch sensing control
- Smart ANC
- Power on
- Power off
Get Started
Power on (LP)
Product Registration kef.world/Mu7reg
- Power on
- Long press (LP)
- Product Registration
Music / Call / Voice control
Tap once / Tap + Hold
LED Indicator Light
- Power on
- Pairing
- Connected
- Solid white
- Blinking blue
- Blinking white
Specifications
| Model | Mu7 |
|---|---|
| Product | Bluetooth headphones |
| Active noise cancellation | ANC on, Smart ANC, ANC off |
| Speaker drivers | 40mm |
| Frequency range | 20-20000Hz |
| Sensitivity | 118.5dBSPL/1mW at 1KHz |
| Impedance | 16Ω |
| Max power output | 15mW |
| Bluetooth | 5.1 |
| Codec | SBC, AAC, aptX, aptX HD |
| Bluetooth power | Class 2 |
| Bluetooth range | 10m |
| Bluetooth frequency | 2.402GHz – 2.48GHz |
| Li-ion rechargeable battery | 1100mAh |
| Battery play time (BT+ANC on) | Up to 40 hrs |
| Fast charging (15 mins) | Up to 8 hrs |
| Dimension (H x W x D) | 199 x 153 x 89mm |
| Weight | 309g |
| Operating temperature | -10ºC to 45ºC |
| Power input | 5V d.c., 900mA |
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC SAR Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification.
Industry Canada (IC) Compliance Statement This device contains licence- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>