Roland VersaStudio BN-20 Sign Maker Instruction Manual

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property. Points that must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING

| Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
---|---

CAUTION

| Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.

Note: Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.

About the Symbols

****| The symbol alerts the user to important instructions or warnings. The specific meaning of the symbol is determined by the design contained within the triangle. The symbol at the left means “danger of electrocution.”
---|---
| The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. The symbol at left means the unit must never be disassembled.
| The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. The symbol at the left means the power-cord plug must be unplugged from the outlet.

Incorrect operation may cause injury.

WARNING

Be sure to follow the operating procedures described in this documentation.
Never allow anyone unfamiliar with the usage or handling of the machine to touch it. Incorrect usage or handling may lead to an accident.

Keep children away from the machine.
The machine includes areas and components that pose a hazard to children and may result in injury, blindness, choking, or other serious accident.

Never operate the machine while tired or after ingesting alcohol or any medication.
Operation requires unimpaired judgment. Impaired judgment may result in an accident.

Never use the machine for any purpose for which it is not intended, or use the machine in an undue manner that exceeds its capacity.
Doing so may result in injury or fire.

For accessories (optional and consumable items, power cord, and the like), use only genuine articles compatible with this machine.
Incompatible items may lead to an accident.

Before attempting cleaning, maintenance, or attachment or detachment of optional items, disconnect the power cord. Attempting such operations while the machine is connected to a power source may result in injury or electrical shock.

Never attempt to disassemble, repair, or modify the machine.
Doing so may result in fire, electrical shock, or injury. Entrust repairs to a trained service technician.

**** CAUTION

Exercise caution to avoid being pinched or becoming caught.
Inadvertent contact with certain areas may cause the hand or fingers to be pinched or become caught. Use care when performing operations.

Never attempt operation while wearing a necktie, necklace, or loose clothing. Bind long hair securely.
Such items may become caught in the machine, resulting in injury.

CAUTION

Conduct operations in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in the machine as the result of an inadvertent stumble.

Never climb or lean on the machine.
The machine is not made to support a person. Climbing or leaning on the machine may dislodge components and cause a slip or fall, resulting in injury.

Caution: cutting tool.
This machine has an internal tool. To avoid injury, handle the tool with care.

The danger   of electrical short, shock, electrocution, or fire

WARNING

Connect to an electrical outlet that complies with this machine’s ratings (for voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.

Never use out of doors or in any location where exposure to water or high humidity may occur. Never touch with wet hands.
Doing so may result in fire or electrical shock.

Never allow any foreign object to get inside. Never expose to liquid spills.
Inserting objects such as coins or matches or allowing beverages to be spilled into the ventilation ports may result in fire or electrical shock.
If anything gets inside, immediately disconnect the power cord and contact your authorized Roland DG Corp. dealer.

Never place any flammable object nearby. Never use a combustible aerosol spray nearby. Never use in any location where gases can accumulate.
Combustion or explosion may be a danger.

Handle the power cord, plug, and electrical outlet correctly and with care. Never use any article that is damaged.
Using a damaged article may result in fire or electrical shock.

Connect to the ground.
This can prevent fire or electrical shock due to current leakage in the event of a malfunction.

WARNING

When using an extension cord or power strip, use one that adequately satisfies the machine’s ratings (for voltage, frequency, and current).
The use of multiple electrical loads on a single electrical outlet or a lengthy extension cord may cause a fire.

Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an electrical outlet. Also, provide enough empty space to allow
immediate access to the electrical outlet.

If sparking, smoke, burning odor, unusual sound, or abnormal operation occurs, immediately unplug the power cord. Never use if any component is damaged.
Continuing to use the machine may result in fire, electrical shock, or injury. Contact your authorized Roland DG Corp. dealer.

**** Do not use the supplied power cord for other products.

**** Important notes about the power cord, plug, and electrical outlet

Never place any object on top or subject to damage.| Never allow getting wet.| Never make hot.

Never bundle, bind, or roll-up.| Never bend or twist with undue force.| Never pull with undue force.
| |
Dust may cause a fire.| |

Ink, cleaning fluid, and discharged fluid are flammable and toxic.

**** WARNING

Keep open flame away from the work area.
Ink and discharged fluid are flammable.

Never store ink, cleaning fluid, or discharged fluid in any of the following locations.

• Any location exposed to open flame
• Any location where the high temperature may occur
• Near bleach or any other such oxidizing agent or explosive material
• Any location within the reach of children’s Fire may be a danger. Accidental ingestion by children may pose a health hazard.

Never place an ink cartridge in the fire.
Ink may flow out, catch fire, and spread fire to other nearby objects.

Never drink or sniff ink, cleaning fluid, or discharge fluid, or allow them to come in contact with the eyes or skin.
Doing so may be hazardous to the health.

**** CAUTION

Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes.

Never allow an ink cartridge to be subjected to impact, and never attempt to disassemble.
Ink may leak.

In the event of ingestion or physical distress

• In the event of contact with the eyes, immediately flush with water for at least 15 minutes. If eye irritation continues, seek treatment by a physician.
• In the event of contact with skin, immediately wash with soap. If irritation or inflammation occurs, seek treatment by a physician.
• In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly inducing vomiting may lead to the danger of choking.
• If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea persists, seek treatment by a physician.

**** The danger of fire, burns, or toxic gas emissions

**** CAUTION

Caution: high temperatures
Areas such as the heater become hot. Exercise caution to avoid fire or burns.

When printing is not being performed, remove any loaded media or switch off the power.
The continued application of heat at a single location may cause the release of toxic gases from the media or pose a fire hazard.

Never use media that cannot withstand heat.
Doing so may degrade the media, or may result in fire or the release of toxic gases..

**** Warning Labels

Warning labels are affixed to make areas of danger immediately clear. The meanings of these labels are as follows. Be sure to heed their warnings. Also, never remove the labels or allow them to become obscured.

Important Notes on Handling

This machine is a precision device. To ensure the full performance of this machine, be sure to observe the following important points. Failure to observe them may not only result in loss of performance but may also cause malfunction or breakdown.

Printer Unit

This machine is a precision device.

• Handle carefully, and never subject the machine to impact or excessive force.
• Never needlessly put your hand or fingers inside the cover, the ink-cartridge ports, or other internal areas of the machine.

Install in a suitable location.

• Install in a location having the specified temperature and relative humidity.

• Install in a quiet, stable location offering good operating conditions.
  The print heads are delicate.

• Never needlessly touch or allow media to scrape them. Failure to handle care may cause damage.

• The print heads may be damaged if allowed to dry out. The machine prevents desiccation automatically, but
  improper operation may render this feature inoperative.
  Operate properly, as specified in this manual.

• Never allow the machine to stand with an ink cartridge removed. The remaining ink in the printer may harden and clog the print heads.

• The print heads are components that wear out. Periodic replacement is required, with the frequency of replacement depending on use.
  This machine becomes hot.

• Never cover the ventilation holes with cloth, tape, or anything else.

Do not leave the front cover and maintenance cover open.

• Only open the front cover when necessary, such as when loading media. In all other situations, be sure to close the front cover. Be sure to close the maintenance cover after performing maintenance.
• This machine periodically performs automatic maintenance, but this will not be performed if the front cover or maintenance cover is open. If the machine is left with a cover open, the print heads may malfunction.

U nsuitable Installation Sites

• Locations are subject to large fluctuations in temperature or humidity.
• Locations are subject to shaking or vibration.
• Locations where the floor is tilted, not flat, or unstable.
• Dusty locations.
• Locations exposed to direct sunlight.
• Locations close to air-conditioning or heating equipment.
• Locations exposed to water or moving air.
• Locations exposed to considerable electrical or magnetic noise, or other forms of electromagnetic energy.

Ink Cartridges

Ink cartridges come in various types.

• Use a type that is compatible with the printer. Also, be sure to use only genuine items from Roland DG Corp.
  Never subject to impact or attempt to disassemble.

• Never drop or shake forcefully. The impact may rupture the internal pouch and cause the ink to leak.

• Never attempt to disassemble.

• Never attempt to refill the ink.

• If ink gets on your hands or clothing, wash it off as soon as possible. Removal may become difficult if allowed to stand.

Storage

ECO-SOL MAX/ECO-SOL MAX 2 ink

• Store unopened in a well-ventilated location at a temperature of -20 to 40°C (-4 to 104°F).

ECO-SOL MAX 3 ink

• Store unopened in a well-ventilated location at a temperature of -5 to 40°C (23 to 104°F).
  Also, avoid storage for a long length of time in a low temperature or high- temperature environment.

This product must be disposed of separately at your local waste recycling center. Do not dispose of it in the household waste bin.

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Unauthorized changes or modifications to this system can void the user’s authority to operate this equipment.

Use only I/O cables that have been designed and manufactured specifically for his device.

For Canada
CAN ICES-3 (A)/NMB-3(A)

For California

WARNING :
This product contains chemicals known to cause cancer, birth defects, and other reproductive harm.

For EU Countries
WARNING

The operation of this equipment in a residential environment could cause radio interference.

Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi,
Shizuoka-ken, 431-2103 JAPAN

The importer in the EU:
Roland DG Europe Holdings B.V.
Prof. J.H. Bavincklaan 2, 1183 AT, Amstelveen, The Netherlands

NOTICE

Grounding Instructions

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug.
Repair or replace damaged or worn-out cord immediately.

Operating Instructions

KEEP GUARDS IN PLACE and in working order.

MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starker keys.

DON’T OVERREACH. Keep proper footing and balance at all times.

DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters, and the like.

REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off position before plugging in.

NEVER STAND ON A TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

NEVER LEAVE THE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave the tool until it comes to a complete stop.

USE THE POWER SUPPLY CORD WHICH IS ATTACHED TO THE PRODUCTS. do not use other power supply cords.

Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi,
Shizuoka-ken, 431-2103 JAPAN

The importer in the UK:
Roland DG (U.K.) Ltd.
Griffin House, Windmill Road, Clevedon Business Park, Clevedon, North
Somerset, BS21 6UJ, United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>