INTEX 28638 Built In Foot Pump Owner’s Manual
- June 12, 2024
- INTEX
Table of Contents
INTEX 28638 Built In Foot Pump Owner’s Manual
INTEX® OWNER’S MANUAL
BUILT-IN FOOT PUMP
READ AND FOLLOW ALL INSTRUCTIONS BEFORE INFLATING OR USE
BEFORE INFLATING WITH BUILT-IN FOOT PUMP
- Spread the air bed out on a flat surface. Make sure this surface is free of stones or others sharp objects which might puncture the air bed.
- The built-in air pump inflation valve ❶ must face up.
- Make sure that the insert plug is properly positioned and the 2 in 1 exhaust valve ❷ cap is securely tightened.
TO INFLATE USING THE BUILT-IN FOOT PUMP
- Remove the air pump inflation valve cap and insert plug ❶ . Save the cap and plug to reattach after inflation.
- Locate and spread the built-in foot pump out to ensure the foot pump surface is flat and straight.
- Placing your foot directly over the inflation valve opening, push firmly down ❸ . This will push air from the air pump chamber into the bed.
- Release your foot ❹ so the air pump chamber will re-fill with air for the next cycle.
- Repeat until desired firmness is achieved.
- Replace the air pump inflation valve insert plug and cap ❶ .
TO INFLATE USING AN EXTERNAL AIR PUMP
-
Make sure the air pump inflation valve ❶ insert plug is properly positioned and the 2 in 1 ❷ exhaust valve cap is securely tightened.
-
Pull 2 in 1 ❷ valve cap to open.
-
Insert the nozzle from an air pump into the 2 in 1 ❷ inflation valve.
-
Inflate the product to approximately 80% of desired firmness.
CAUTION: To prevent bursting, do not over inflate or use high pressure air compressor. -
Close 2 in 1 ❷ valve cap securely after inflation.
TO DEFLATE
-
Pull out 2 in 1 ❷ valve cap.
-
Pull inflation valve base to release air.
CAUTION: When opening, point the exhaust valve away from any person. -
Replace inflation valve base and cap securely.
IMPORTANT
Air inside of bed may expand and contract with varying temperature leading to reduce pressure inside of the bed. If this occurs, simply add more air using the pump to achieve desired firmness. If puncture occurs, please refer to instruction. Repair kit/patch is enclosed.
SAVE THESE INSTRUCTIONS
©2022 Intex Marketing Ltd. – Intex Development Co. Ltd. – Intex Recreation
Corp. All rights reserved. Printed in China.
®™ Trademarks used in some countries of the world under license from Intex
Marketing Ltd. to/à/a/an Intex Development Co. Ltd., Hong Kong & Intex
Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the
European Union by Intex Trading B.V., Ettenseweg 46, 4706 PB Roosendaal – The
Netherlands • Distributed in the UK by Unitex Service (UK) Limited, 21 Holborn
Viaduct, London EC1A 2DY, UK.
www.intexcorp.com
015-*IO-R0-2304