VEVOR 451P Handheld Digital Endoscope User Manual

HANDHELD DIGITAL ENDOSCOPE
USER MANUAL

451P Handheld Digital Endoscope

HANDHELD DIGITAL
ENDOSCOPE
Installation Instruction

Model: 451P

NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
[email protected]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please  forgive us that we won’t inform you again if there are any technology or software updates on our product.

SAFETY WARNING

Please read the following instructions carefully and save this manual.
Failure to follow the instructions listed in this manual may result in electric shock, fire, or serious personal injury.

WELCOME

Thank you for choosing our product. Please read the instructions carefully before use.
This product is a new type of practical device that can view videos in real- time video, record, and takes pictures. Mainly used in areas where the line of sight cannot be observed, such as: car repair, sewer inspection/maintenance, air conditioning inspection, etc.

FEATURES

1. 4.5-inch color high-definition IPS screen

2. 1080P HD image

3. 360° image rotation

4. TF card can be installed to achieve file storage function.
   Maximum support 32GB.

5. 8mm HD camera

6. Front lens clear viewing range from 3cm to 10cm

7. Type-c plug-in, easy to replace different lenses

8. 8 adjustable LED lights

9. IP67 waterproof

APPLICATION

It is widely used in aviation, automobiles, ships, electrical, chemical, electric power, natural gas, atomic energy, civil engineering and construction. Industrial endoscopes can also monitor, record, store and analyze targets.

ACCESSORIES LIST

1. Digital endoscope
2. Manual
3. USB data cable
4. Accessories – Hook, magnet, protective cap

(1) Part Name And Function

1. Camera
2. Cable
3. Settings button
4. Light adjustment
5. Reset button hole
6. Micro TF card slot
7. Charging indicator
8. DC 5V/1A charging port| 9. Take pictures
10. Up and rotate
11. OK
12. Down
13. Back button
14. 4.5 inch IPS screen
15. Unlock switch
---|---

(2) Function Introduction

1. Micro TF card slot: Supports up to 32GB Micro TF card, Only supports TF cards with class 10 or higher FAT32 format( equipped with this product ).
2. Micro port: 5V/1A power supply.
3. Power button: Long press for 3 seconds to turn on or off the device.
4. Photo button: Short press to take a photo.
5. Video button: Long press to start recording, press again to stop recording.
6. Setting button: Short press to enter the menu page, where you can set the Resolution / Language settings / Date time / Date label / Brightness / Screen protector / Automatic shut-down / Format / Default settings / Version.
7. Up button: Image mode is a rotation function. Other modes are left or up movement.
8. OK button: Short press to confirm.
9. Back button: Short press to return to the previous menu.
10. LED brightness adjustment button: Camera rightness is divided into three levels.
11. Indicator light: The charging indicator light is always on and the light becomes green when fully charged.

INSTALLATION NOTES

1. Installation Hose
   Insert the Type-C interface into the display screen

2. Installation Accessories
   How to install the three accessories?
   The protective cap, hook, and magnet can be installed similarly.

STEPS FOR USAGE

(1) Basic Operation

1. Insert the Micro TF card (not equipped with this unit) into the Micro TF card slot; Press gently until the card is locked (note: the class 10 Micro TF card must be inserted to record and store pictures and videos). To prevent data  loss or damage, power off the device before inserting or removing the memory card
2. When turning it on, press the LED brightness adjustment button to adjust the brightness of the camera.
3. Short press the camera button to take a photo, long press the video button to record.

When the battery is low, insert the miniature end of the data cable into the charging port at the bottom of the fuselage, and then plug the other end of the power adapter into the standard AC outlet.
The charging indicator light is always red when charging, and it lights up green when fully charged. The charging time is 4 to 5 hours.

TECHNICAL PARAMETERS

TROUBLE SHOOTING

4-5H, restart.
TF card reading failed.| 1. TF card format is incorrect? (This device only supports FAT32 flee format).
2. Reinsert after removing the TF card.
Problem| Solution
---|---
After titer device is connected to the PC, the TF card cannot be read.| 1. Reconnect the device and PC.
2. Confirm whether to enter the Mass storage mode.
Device crash.| First, insert the USB data cable to charge the product. It will automatically shut down. Then, press the power button to reset. It can be reset by lightly pressing the reset hole with a fine needle.
Smudges or smears are present on the screen.| Wipe the screen and lens gently with a clean cloth dipped in alcohol.
Cannot charge or the charging indicator does not light up.| Please replacive charging cable.

FCC INFORMATION

This device complies with Part 15 of the FCC Rules.
Subject to the following two conditions：

1. This device does not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU ENVIRONMENTAL PROTECTION

1. Waste electrical products should not be disposed of with household waste.
2. Please consult your local government or retailer for recycling advice.
3. lf the number contained in the user manual has any minor changes without prior notice.

EU ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste.
Please consult your local government or retailer for recycling advice.

• There are any minor changes to the numbers included in the user manual without prior notice.

EUREP GmbH
Unterlettenweg 1a, 85051 Ingolstadt, Germany

EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
EU Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
UK Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Add: 1301#Block 3,Tian’an Yun Gu Industrial Park, Bantian Longing District, Shenzhen City, China

 E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>