Klipsch KD-52F KD Series Home Theater Speaker System Instruction Manual

Klipsch KD-52F KD Series Home Theater Speaker System

LOUD AND PROUD SINCE 1946

In 1946, Paul W. Klipsch revolutionized the audio industry by creating our proprietary horn technology and the acoustic principles that are the driving force behind our highly acclaimed signature sound. Today, we remain true to PWK’s vision and pack the better part of a century’s worth of sweat and genius into every product we make. These speakers are the result of our obsession with that aural perfection. Experience the power, detail, and emotion of the Klipsch KD Series. We are the Keepers of the Sound®.

SCAN FOR SPEAKER PLACEMENT AND SET UP HELP

OR GO TO KLIPSCH.COM/KD-SERIES-SETUP

INSPECTION

We want your new speaker system to look as good as it did leave the factory! Please check promptly for any transit damage. Carefully unpack your new speaker system and verify the components against the packing list. In extreme circumstances, items may have become damaged in transit. If any damage is discovered, notify the delivery service and dealer where the system was purchased. Make a request for inspection, and follow their instructions for evaluation. Be sure to keep the product’s original shipping carton.

ROOM PLACEMENT

Left and Right Front Speakers — For optimum performance, Klipsch Group, Inc. (KGI) suggests placing your front left and right speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3 for connection and placement. KD-52C Center Channel Speakers — Center channel speakers are designed to place dialogue and primary sounds so that they appear to come from the video screen. The speakers should therefore be placed as close to the screen as possible, preferably directly on top of or below the screen. Refer to Figures 1, 2 and 3 for connection and placement. Rear Surround Channel Speakers — Klipsch surround speakers should be placed approximately 2 feet above the listening position. Typically this will be about 5-7 feet above the floor. The surrounds should be placed on the walls directly adjacent to the listening position. Another option would be on the wall behind the listening position. The final surround speaker placement depends on your room’s characteristics. They are designed to recreate the sense of space and ambiance that many of today’s surround sound technologies provide. Refer to Figures 1, 3, and 4 for connection and placement.

RECOMMENDED USE BY MODEL

CONNECTION

Conventional Connection — Using 16-12 gauge speaker wire, connect the RED “positive” (+) terminal of the LEFT speaker to the RED “positive” (+) terminal of your amplifier’s LEFT channel. Connect the BLACK “negative” (–) terminal of the LEFT speaker to the BLACK “negative” (–) terminal of your amplifier’s LEFT channel. Repeat the above procedure for connecting all remaining speakers to the appropriate amplifier channels. Refer to Figure 3. Make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment. Some Klipsch Front speakers come with dual binding posts that are connected by a metal strip. Do not remove this strip or your speakers will not function correctly. Keep this strip in place and connect your speaker wire to the top set of the binding posts. It is possible to “Bi-wire” a speaker that has two sets of binding posts. Please see your receiver’s manual for further instructions. Amplifier Requirements — Klipsch speakers are highly efficient and will operate easily on a wide variety of amplifiers. All Klipsch speakers are 8-ohm compatible and can be driven to very high levels with low distortion. Due to the high output levels, Klipsch speakers are capable of reproducing, exercise caution with the volume control. Excessive volume over long periods can permanently damage your hearing. Overdriving your amplifier could also damage your speakers. Check with your dealer or amplifier manual to make sure your particular amplifier is best suited to your application. We want you to listen for a lifetime.

FIGURE 1
SPEAKER PLACEMENT IN THE LISTENING AREA

FIGURE 2
CENTER CHANNEL PLACEMENT

FIGURE 3
CONNECTING TO AV RECEIVER

FIGURE 4
CONNECTING TO AV RECEIVER

CARE AND CLEANING

The only thing you should ever need to do to your speakers has dusted them occasionally. Never apply any abrasive or solvent-based cleaner or any harsh detergent. You can clean the grilles with the brush attachment of a vacuum cleaner.

PRODUCT REGISTRATION

Register your product online at www.klipsch.com/register

•  Keep up-to-date on new products and promotions.
•  Your personal information will never be resold.
•  This registration information is not used for warranty purposes.
  PLEASE RETAIN YOUR RECEIPT FOR WARRANTY CLAIMS.

Documents / Resources

| Klipsch KD-52F KD Series Home Theater Speaker System [pdf] Instruction Manual
KD-52F, KD-51M, KD-52C, KD-52F KD Series Home Theater Speaker System, KD-52F, KD Series, Home Theater Speaker System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>