TAOTRONICS SoundLiberty A15 Wireless Earbuds User Manual

TAOTRONICS SoundLiberty A15 Wireless Earbuds

YOUR EARBUDS

Accessories

SETTING UP YOUR EARBUDS

Wearing

Charging

We highly recommend that you fully charge the earbuds before using them for the first time.

1. Place the earbuds into the charging case.
2. Close the case and connect to any USB charging port with the included cable.

Power ON/ OFF

Bluetooth Caution

• Place the two devices to be connected close to each other and tum off \31 other Bluetooth devices.
• The maximum effective Bluetooth range may vary with the environmental circumstances. Obstacles (walls, fences, etc.) between the two devices may shorten the effective range.

Bluetooth Pairing – Binaural Mode

• Uncover the lid 10 tum on the earbuds, they will connect with each other au10matically.
• Turn on the Bluetooth function on your device and search for nearby devices.
• Find “TaoTronicsA15” in the search results, tap to connect.

1. Each time you power on your earbuds, they will automatically connect to your last successfully connected device if it is available within the Bluetooth range.
2. When earbuds are disconnected from your device for more than 10 minutes, they will turn off automatically.

Bluetooth Pairing – Mono Mode

• When Bluetooth connection, you can use either one of the earbuds as per your preference.
• Take out one earbud, and make sure the other one is placed in the case with the lid covered.
• If you want to change to binaural mode, simply take out the other
• I earbud from the charging case, they will pair with each other automatically.
• When failing to automatically pair with a Bluetooth device, you can manually pair as instructed below without clearing the pairing history.
• Place both earbuds back in the charging case with the lid uncovered.
• Press and hold the Reset Button for 3 seconds.

Controls and Functions

Resetting Your Earbuds

Reset the earbuds if they cannot connect with your device properly .

1. Remove “TaoTronicsA15” from the Bluetooth device list.
2. Place the earbuds back into the charging case and keep the lid open .
3. Press and hold the reset button for 10 seconds until the indicator on the case flashes white three times.
4. Re-pair with your device as instructed.

To pair with another Bluetooth device, deactivate the Bluetooth function on the paired device or remove ”TaoTronics A 15″ from its Bluetooth list.

CLEANING AND MAINTENANCE

1. Wipe only with a dry, soft cotton swab or equivalent. Never insert anything into the nozzle .
2. Wipe only with a dry, soft cotton swab or equivalent
3. Remove the ear tips and rinse with a mild detergent and water.
4. Thoroughly dry before reattaching them to your earbuds.

• Clean the earbuds and the charging case regularly.
• Keep away from sharp objects to avoid scratches.
• Place in a dry and shady place if they are not in use for a long time.
• DO NOT clean with detergent or chemicals.

TROUBLESHOOTING GUIDE

Cannot find the earbuds In the Bluetooth list

• Deactivate the Bluetooth function of the previously paired device or remove the earbuds from the Bluetooth list and connect again.
• Place the device to be connected close to the earbuds.

Cannot connect with your device

• Place the earbuds and your device close to each other.
• Move both devices away from other Bluetooth devices, microwaves, wireless routers, and other electronics.
• Make sure the Bluetooth function is activated before pairing.
• Remove the earbuds from the Bluetooth list and connect again.
• Reset the earbuds and pair them again (see “Resetting Your Earbuds”).

Intermittent Bluetooth connection

1. Move the device closer to the earbuds.
2. Remove the earbuds from the Bluetooth list and connect again.
3. Tum off other Bluetooth devices to decrease the interference.

Cannot use a single earbud

1. Make sure both earbuds are paired with your device first.
2. Then follow the steps to pair the single (left or right) earbud ith your device.

No sound from one earbud

1. Make sure the earbuds are within range of each other.
2. Place both earbuds back to the charging case and then take them out.

Poor sound quality

1. Clear any debris from the earbud nozzles.
2. Place both devices close to each other or remove the obstacles between them.
3. Try with a different audio source.

Microphone does not receive sound

1. Check that the microphone is not blocked or covered.
2. Make sure the microphone is not muted on your phone.
3. Remove the earbuds from the Bluetooth list and connect again.

Cannot hear own voice while on a phone call:

1. Check that the microphone is not blocked or covered.

Cannot hear caller while on a phone call

1. Set the volume to a higher level.

Earbuds do not turn on

• Battery low. Place both earbuds back into the charging case to charge.
• Failed to charge the Earbuds:
• Place both earbuds in the charging case properly until they magnetically snap into place.
• Make sure the charging case iS fully charged.

Earbuds do not respond to touch control

• Makue sure you are touching the correct touch control area.
• Make sure you put on the earbuds properly.
• Make sure your fingers are dry.
• Reset the earbuds and pair again (see “Resetting Your Earbuds”).

IMPORTANT SAFETY INSTRUCTIONS

Please read the Instructions thoroughly before using this product and retain it for future reference.

HEARING SAFETY

• DO NOT wear earbuds with high volume for a long time to avoid damaging your hearing.
• Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference.
• DO NOT set volume too high to stay aware of your surroundings.
• Please refer to local laws and regulations if you want to answer phone calls via this device during driving.
• For your safety, avoid distraction from music or phone call you are driving or doing other activities with potential dan

CAUTION

• DO NOT expose this product to high temperatures.
• DO NOT immerse the earbuds into water or expose them humidity for a long time.
• DO NOT clean the product with detergent containing alcohol, ammonia, benzene or abrasives.
• Avoid dropping.
• Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazard.
• Unauthorized disassembly of any parts of this product is forbidden, which may cause fire hazard, warranty voidance, and/or property loss.
• DO NOT use the product in thunderstorm to avoid malfunction or electric shock.
• Always ask a professional technician or authorized personnel for repair.

WARRANTY AND SERVICE

This product is covered with Tao T roincs product and labor warranty for 12 months from the date of its original purchase. The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.
• Any unit that has been tampered with or used for commercial purpose.
• Normal wear and tear of wearable parts.
• Use of force, damage caused by external influences.
• Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
• Partially or completely dismantled appliances.
• Defects caused by or resulting from damages from shipping or from
• repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by TaoTroincs.
• We can only provide after sales service for products that are sold by TaoTroincs or TaoTroincs authorized retailers and distributors.
• If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

Please have your invoice and order ID ready before contacting Customer Support.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>