pulsar PXW02 Xlite Wireless Gaming Mouse User Manual

: June 6, 2024
: Pulsar

Table of Contents

pulsar PXW02 Xlite Wireless Gaming Mouse
overview
E DPI Settings
Read User Manual Online (PDF format)
Download This Manual (PDF format)

pulsar PXW02 Xlite Wireless Gaming Mouse

overview

Mouse Key Setting
DPI Setting
Macro Setting
Language setting
Info
battery status
Restore
Export the proﬁle
Import the proﬁle

A Debounce Settings
Adjust the mouse’s debounce time. Debounce time is basically an amount of time that the switch doesn’t register another click. A higher debounce time prevents double clicks but increases input delay. Adjustable from 0 to 30ms (milliseconds).

B Proﬁle Setting
Open the proﬁle list and select the proﬁle to set. You can save and use up to 4 proﬁles.

C Key Setting
First, check the number of the button you want to change.

Left-click
Right-click
Wheel button
Side button 1
Side button 2

Select the button you want to change and set the desired key.

D Key Description
Polling Rate Changes polling rate in loop 125Hz-250Hz-500Hz-1000Hz.

D-2 Proﬁle Changes Proﬁle.

Fire Key (in-game function) Fires a bullet repeatedly at a set interval (ms). The number of shots can be set from 0-3. If set to 0, the shot will continue to ﬁre while the button is pressed. The speed can set (3-255) in milliseconds.

D-4D -1 Key combination
you can set the key from 1 key to a maximum of 3 combinations.

D-5D- 1 Disable
Deactivating the key.

D-6D- 1 Macro
Select already made macro.

D-7D-1 DPI
Change DPI in Loop (4 stage) and you can set this in DPI page.D-7D-1 DPI

D-8 Multimedia You can set it as a multimedia key shortcut.

D-9 DPI Lock DPI can shift to the selected DPI and stay while you are pressing holding the key. You can choose from 100~1100dpi and this function is useful when playing FPS game in Sniper mode.

E DPI Settings

E-1 D PI Stages Up to 4 Stages.

E-2 DPI Select You can select DPI by clicking DPI1, DPI2, DPI3, DPI4. The selected DPI is in red color.

E-3 DPI Input
You can either use scroll bar to adjust DPI or Double Click the number to pop up the window and type in your desired DPI.

E-4 DPI Light Color Setting
Double click the color box to change the color of the LED.

E-5 DPI Effect
You can choose from 3 effects (steady, breathe, Off) If you choose steady, you can adjust the brightness. If you choose breathe, you can adjust the speed. If you turn off the LED, the battery will last longer.

F USB Polling rate
Choose polling rate.

G LOD
LOD = Lift off distance
LOD is a sensor detecting distance. If you set 1mm, the sensor will detect lift up to 1mm height from the surface.

H Ripple control / Angle snapping

Ripple control: Line smoothing in order to reduce jitters.
Angle snapping: Predicts when you want to draw a straight line and then corrects your mouse movements so it goes in a straight line.

I Mouse Parameters
Mouse sensitivity Adjust the mouse sensitivity. It can be adjusted from 1 to 20. Scrolling speed Adjust the scroll speed. It is adjustable from 1 to 10. Double-click speed Adjusts the double-click speed. Adjustable from 900 to 200.

J Macro Settings
New Macro Create new macro. New Macro Create new macro. Choose macro Click macro.Start Recording Record macro.Automatic recording time delay Check: Automatically detects the delay between macros and inserts them. automatic recording time delay check: Inserts macros without delay between macros.