IKOHS V3 Multifunction Digital Scale User Manual
- June 6, 2024
- IKOHS
Table of Contents
IKOHS V3 Multifunction Digital Scale User Manual
WELCOME
Thank you for choosing our bathroom scale. Before using the appliance, and to
ensure the best use, carefully read these instructions. The safety precautions
enclosed herein reduce the risk of death, injury and electrical shock when
correctly adhered to. Keep the manual in a safe place for future reference,
along with the completed warranty card, purchase receipt and package. If
applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident-prevention measures when
using an electrical appliance. We assume no liability for customer failing to
comply with these requirements.
IMPORTANT SAFETY PRECAUTIONS
Use the device only as described in the instructions. The company will not be held responsible for any damages which may derive from an improper use.
- Please take off shoes and socks and keep your bare feet in touch with the electrodes when measuring body weight, BMI, BFR, muscle, moisture, bone mass, BMR, visceral fat, protein rate, body age, standard weight or body fat.
- Please check the batteries if the scale malfunctions. Replace them if necessary.
- Please use soft tissue with alcohol or glass cleaner to clean the surface if it is dirty. No soap or other chemicals. Keep it away from water, heat and extreme coldness.
- The scale is a high precision measuring device. Never jump or stomp on the scale or disassemble it and please handle it carefully to avoid breaking when moving it.
- The scale is for family use only and not suitable for professional use. Body weight, BMI, BFR, muscle, moisture, bone mass, BMR, visceral fat, protein rate, body age, standard weight, body fat measured are for reference only. You should consult a doctor when you undertake any diet or exercise program.
- Caution: Slippery when wet! The scale platform may be pretty slippery when wet, thus please make sure both the scale platform and your feet are dry before use. Never step on the scale platform with wet feet.
- Please use the scale on a hard and flat surface. Do not use on a carpet or soft surface.
- Carefully step on the platform of the scale. Stand as stationary as possible until the weight reading is shown and locked on the display.
- The scale will be Automatically off if there is no operation for a while.
GETTING STARTED
- Make sure your mobile device is running iOS 8 or higher or Android 4.1 x or higher.
- Make sure you are connecting to a 2.4GHz Wi-Fi network (it can’t connect to 5Ghz networks).
-
Download CREATE Home app from App Store or Google Play.
IPhone
Google Play
-
Register an account on your CREATE Home app.
- Enter your mobile phone number or email address.
- Enter the verification code and create a password.
-
Add your divide.
- Open CREATE Home app, click “+” , then click on “Add new device”. Choose the scale category. Then you will need to select your Wi-Fi network and enter your password.
- At the moment, please power on your scale and then long press the button (inside of the battery cover), until the the a and ‘its icons flash, it means the scale is in WiFi configuration mode.
- Next, select the indicator light status, you can choose “Fast flashing” if your light is flashing every 0.5 seconds or “Slow flashing” if your light is flashing every 3 seconds.
- Wait until the display shows 100%. Keep the scale always on while the screen shows and . If the scale powers off, please power on again and long press the unit button again until the display shows 0.0 and the Wi-Fi icon stops flashing. This means the scale is successfully connected to the app. If the WiFi icon is still flashing it means the scale is no connected to the app.
-
Once your device is successfully connected, the app is ready to be used to measure your weight. After the measuring is done, you can claim your weight on the ‘See” button. You can have more than one user registered on the app, check which user is on before using the scale.
-
There are 2 way s to change units:
- On the app: Click “set upTM, “unit switching” to select weight unit between: kg / lb / st
- On the scale: Short press the unit button on the back side of the scale.
ERROR ICONS ON THE SCALE
- Overload or error in measurement: The display will indicate “Err when the scale is over max capacity. Please remove the weight to avoid any damage.
- Low battery: The display will indicate “Lo”. Open the battery cover and replace them.
- Faulty measurement: The display will show “Err1” for these 2 reasons:
- Body fat percentage is less than 5% or over 50%.
- Unsuccessful test.
FREQUENTLY ASKED QUESTIONS
- Can I share the scale with family and friends?
- Yes, you can share your scale with family and friends who will have access to the app. In order to share the device, the other users should have downloaded the app and registered a new account. Press the Profile button and click on the “Home Management” button. You can give or revoke sharing permissions.
- What’s the wireless range?
- The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact data range.
- The device appears offline or unreachable?
- Make sure your Wi-Fi router is online and in range. Make also sure that you have the latest app functionality by clicking “Check for firmware update” in your device settings.
- Cannot connect to your Wi-Fi network.
- Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
- How many scales can I control?
- IKOHS Home app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to it.
HOW TO USE WITHOUT WI-Fl
- If you can’t connect the scale to a Wi-Fi network, then you just have to stand on the scale and it will only measure your body weight.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.